LATZKE Härteprüfung GmbH

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg Rjdpfx Ameza Dv Ismou R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of supply: see pictures Inspection possible by arrangement. Loading can be organized. Subject to changes and errors in the technical data.

Condition: excellent (used), Year of construction: 2020, AKE technologies Shaker System for Vehicles Manufacturer: AKE technologies GmbH Type: Shaker System for Vehicles Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled testing conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Rjdpfx Amozazm Rsmou Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per lifting table according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Unlocked Functions: 8 Input Channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance studies Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. The system has been disassembled and stored. A complete technical functional test under load has not been performed. Scope of Delivery AKE Shaker System for Vehicles Industrial control cabinet Operator computer Installed software High-power shaker units Vehicle wheel mounts Lifting columns with crossbeam Documentation Software media Accessories according to pictures Inspection possible by appointment. Loading can be arranged. All information provided to the best of our knowledge. Errors, changes, and prior sale reserved.

Year of construction: 2022, condition: like new (used), Memmert ICH 750 chamber from 2022, like new. Demonstration unit with a one-year warranty on spare parts. Description: Temperature setting range -10 to +60 °C Operating temperature range from -10°C to +60°C without humidity (not suitable for long-term storage at temperatures below zero. Ice may form on the glass door during continuous operation) Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of a failure Humidity Humidity Redjzam H Aopfx Ammsu humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range Rjdpfxjzam Hvj Ammsu without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Rjdpfjzam Hiox Ammsu Manufacturer's description: Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Daylight and ultraviolet light can be programmed individually using the controller Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Year of construction: 2024, condition: like new (used), Memmert HPP 1060 eco chamber, manufactured in 2024. Ex-display unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 °C below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 °C below ambient temperature) to +70 °C Rjdpfxezam E Ss Ammju Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity setting range 10 - 90% relative humidity Humidity humidity supplied via distilled water from an external tank using a self-priming pump Humidification humidification using a hot steam generator Dehumidification dehumidification using a desiccant unit employing Peltier technology Humidity setting accuracy 0.5% relative humidity

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Rsdpfxjzachcs Ammou Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Year of construction: 2026, condition: like new (used), Binder KB PRO 130, model year 2026, ex-demo unit in new condition. 2-year warranty on spare parts. Product description: PRODUCT DESCRIPTION A versatile workhorse among thermostat chambers: KB PRO is our most efficient incubator with cooling. A temperature range from -20°C to +100°C and extensive programming functions enable a wide range of applications that go far beyond incubation. KEY FEATURES Temperature range: -20°C to 100°C Proven APT.line™ preheating chamber technology Energy-efficient cooling thanks to a modern inverter refrigeration unit Cooling using the environmentally friendly refrigerant R-290 Door heating to prevent condensation Adjustable fan speed Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner door made of safety glass coated with metal oxide Two wire shelves made of stainless steel Access port Ø 30 mm with silicone stopper Stackable design Intuitive controller with touchscreen, time segment programming, and real-time programming Internal data logger, measurement values in open format can be read via USB Independent temperature protection class 3.3 (DIN 12880) with optical and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB BINDER Multi Management Software APT-COM™ Basic Edition Rsdpjy Urc Hefx Ammou Optional CO₂ gas modules for plant cultivation (0-1%) and cell culture (0-20%)

Year of construction: 2002, condition: used, Hans Hoffmann SA-TP/4 Impact tester 400V/50Hz; 6.5A Rsdpey Ul A Tjfx Ammsu 5000 Joule max. working load

Condition: used, LDS V790 Shaker System LDS V790-335T Air-Cooled Vibrator + LDS HPA-K CE Amplifier + Control and testing accessories Professional electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Industrial system for environmental simulation and vibration testing For sale is a used LDS V790 vibration testing system from commercial industrial use. The system is suitable for vibration tests, oscillation tests, environmental simulation, research & development, quality assurance, electronics testing, and industrial endurance tests. LDS Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1500 lbf Random force RMS: approx. 6.67 kN / 1500 lbf Half-sine shock force peak: approx. 26.69 kN / 6000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar / 80 psi Optional air isolation approx. 5.52 bar / 80 psi LDS Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: HPA-K Amplifier Model: HPA K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Design: HPA-K CE power amplifier Suitable for LDS V790 Shaker System Weight: approx. 750 kg Control / Accessories According to the pictures, the system includes, among other things: LDS amplifier unit / control cabinet Control and rack units PC workstation with monitor, keyboard and mouse Cables and connection accessories as shown in the pictures Emergency stop units / safety accessories A functional test under load has not been documented. Inspection and testing on site are possible and desired by arrangement. Condition Used industrial system. Optical condition see pictures. Normal signs of wear and storage are present. Some scratches, paint chips, dirt and signs of use are visible. The system comes from commercial industrial use. All information is provided to the best of our knowledge based on the visible nameplates, pictures and available documents. Scope of delivery Redpfsy Uigcsx Ammou LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control / rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Available documents / manual Items not explicitly mentioned are not included in the scope of delivery. Scope of delivery exclusively as shown in the pictures or by arrangement. Transport / Collection Heavy industrial system. Transport only by a suitable freight forwarder or industrial transport. Collection and loading by prior arrangement. Inspection, testing and re-measurement on site are expressly possible after prior arrangement. Notes on sale Sale exclusively to commercial customers. Used goods from industrial use. Sale without guarantee, without warranty and without return. Errors, intermediate sales and technical deviations are subject to change. All technical specifications are without guarantee. We will gladly answer further questions via message.

Condition: excellent (used), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, Type COM 200, for controlling electrodynamic vibration testing systems. The system is suitable for random, sine, and shock tests in laboratories, industrial settings, automotive applications, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration testing systems Software / Functions Installed software according to system display: Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Connections USB port BNC connectors Power connection Further connections, see images Calibration Calibration data according to label: Calibration Date: 2010-09-21 Due Date: 2011-09-21 The calibration has expired. A new calibration can be performed by the buyer if required. Condition Used equipment from an industrial application. Optical condition, see images. Normal signs of use and storage are present. The device was switched on. The indicator light and software display are active. Further functional or calibration tests have not been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable according to images Accessories according to images Rodpfx Amoy Ugrpemsu Scope of delivery includes only the items shown in the images. Notes Inspection possible by arrangement. Loading and shipping possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: excellent (used), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Testing and Shaker Control System including Acer laptop with installed software For sale is a used LDS Dactron LASER USB Shaker Control System, Type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules according to software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Further activated options: Automatic Drive Notching / Limiting Rsdpfjy T Iv Hex Ammsu Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB Mode: 2.0 Input Type: Volt / ICP / TEDS Suitable for electrodynamic vibration testing systems and industrial shaker systems. Calibration Calibration data according to system display: Last calibration: 09/20/2023 Displayed due date: 09/19/2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of supply LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used equipment from industrial use. Optical condition see pictures. Normal signs of wear and tear and storage. System starts, software can be opened and the hardware has been recognized. No further tests were performed. Notes Sale exclusively to commercial customers. No guarantee or warranty. Subject to prior sale, errors and changes. We will be happy to answer any further questions by telephone or message.

Condition: excellent (used), Memmert Forced Convection Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Rjdpfxsy T Idwj Ammeu Type: UFP 800 For sale is a used Memmert UFP 800 from commercial use. Technical data Type: UFP 800 Protection class: IP20 Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Equipment Stainless steel interior Forced convection operation Digital control Programmable operation possible Glass viewing doors Multiple insertion levels Movable on castors Condition Used equipment from commercial use. Optical condition see pictures. Normal signs of use and storage are present. Scope of supply Memmert UFP 800 heating cabinet Inserts / accessories as shown in the pictures Scope of supply exclusively as shown in the pictures. Notes Sale exclusively to commercial customers. Used item without guarantee or warranty. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone or message.

Condition: excellent (used), Type: UF 450plus Airflow: forced recirculation Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating Redpfxjy T Icto Ammeu External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculation: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with an approx. 12 cm diameter. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, functionality: not functional, Ishida model IX-G2-4027-H X-ray machine with rejection system, year of construction 2014. Redpfx Aoy Tl Ersmmeu

Condition: excellent (used), LDS Vibration Testing System / Shaker System Type: V8-440 HBT750C Combo + SPA56K v3 Manufacturer: LDS Test & Measurement / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, SPA56K v3 power amplifier, matching transformer PT65.0/3E, hydraulic unit, and IMV K2+ vibration controller. Suitable for vibration tests, shock tests, endurance tests, environmental simulation, automotive, aerospace, electronics testing, research & development, and industrial quality assurance. Shaker / Vibrator Manufacturer: LDS Test & Measurement Type: V8-440 HBT 750 COMBO Serial Number: 1324-000010 Year of Manufacture: 2007 Air-cooled electrodynamic vibrator. Sine force peak: 57.8 kN Random force peak: 60 kN Shock force peak: 264 kN Frequency range: 5 – 2500 Hz Armature diameter: approx. 440 mm Air-bearing and vibration-isolated heavy-duty system. Slip Table / Horizontal Table Type: HBT750C XX4 Mounting surface: 750 x 750 mm Rodpfx Amsy S U Hismsu 2 hydraulic bearings available. Max. pitching moment: 32.17 kNm Max. rolling moment: 34.00 kNm Max. yawing moment: 24.69 kNm Thread pitch: 100 mm Threaded inserts: M10 Power Amplifier Manufacturer: LDS Test & Measurement Type: SPA56K v3 Serial Number: 1004913/1 Professional high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 415 V Max. output power: 86.9 kVA Matching Transformer Manufacturer: LDS / Romarsh Ltd. Type: PT65.0/3E Serial Number: 07001 Power: 56 kVA Input voltage range: 0 – 100V AC Frequency range: 5 – 2500 Hz Controller IMV K2+ Vibration Control System Multi-channel vibration controller including software, data storage, license dongle, and documentation. Supported functions according to documentation: Sine Resonance search Noise Shock Sine-on-Random Random-on-Random Shock Response Spectrum Notching / Limiting Equipment Complete vibration and shock testing system HBT750C slip table included Hydraulic system included Matching transformer included Software package included Documentation included Dimensions / Weight Large industrial system / heavy-duty system Weight of shaker: approx. 2,000 – 2,500 kg Weight of power amplifier: approx. 800 – 1,200 kg Weight of matching transformer: approx. 500 kg Total weight of complete system: approx. 4,000 – 6,000 kg Transport only by a suitable heavy-duty transport company. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial system from industrial use. Optical condition see pictures. Inspection and testing on-site possible by arrangement. Scope of supply LDS V8-440 HBT750C Combo Shaker LDS SPA56K v3 Power Amplifier Matching Transformer PT65.0/3E Hydraulic unit HBT750C Slip Table IMV K2+ Control System Software / Data Storage / License Dongle Documentation and accessories as shown in the pictures. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Testing System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and an HS-Simulators climate chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace, electronics testing, as well as research and development applications. The hall crane / other hall equipment visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial Number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial Number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: Rsdpfx Aoy S S Eiemmeu 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling. Control System UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in the pictures Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulators Climate Chamber Manufacturer: HS-Simulators Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerant: R13 R502 Features: Combined climate and vibration testing Complete electrodynamic testing system DSP-based real-time control Forced air cooling system Completely wired testing system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transportation only by a suitable heavy-duty transport company. Technical data partially estimated. Specifications may vary. Condition Used system from industrial application. Optical condition see pictures. Functionality not fully tested. Inspection possible and desired upon agreement. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control system VWIN II controller system Charge amplifier HS-Simulators climate chamber HS 520 K 60 V Industrial PC / monitor as shown in the pictures Documentation and accessories as shown in the pictures Loading possible upon agreement. Commercial sale without warranty. Errors and prior sales excepted.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Rsdpfx Ajy Sy Npjmmsu Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Rjdpfx Ajy Sg Nvommsu Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling * Refrigerant: R-452A

Condition: like new (used), Year of construction: 2025, Device from 2025, like new. Two-year warranty on spare parts. The Binder KB 240 E6 is a professional refrigerated laboratory incubator with a compressor unit, designed for microorganism cultivation, stability studies, material testing, and sample storage at controlled temperatures. The E6 model, using R-134a refrigerant, is one of the most highly regarded generations in the KB series thanks to its excellent cooling performance and wide temperature range. Key features: * Temperature range: -10°C to +100°C * Chamber volume: approximately 247 liters * Compressor-based cooling * BINDER E6 controller with time programming * APT.line™ technology ensuring uniform temperature distribution * Inner doors made of tempered glass * Stainless steel chamber * 30 mm access port * RS422 interface / compatible with APT-COM™ Applications: * Incubation of microorganisms * Biological and pharmaceutical research * Stability testing * Sample storage * Material testing * Temperature simulation Technical specifications: * Capacity: approx. 247 L * Maximum temperature: 100°C * Power supply: 200–230 V * Power rating: approx. 1.2 kW Benefits of the KB E6 series: * Excellent temperature stability * Effective cooling below ambient temperature * High reliability * More energy-efficient than previous generations * Suitable for continuous operation in laboratories * Popular model for pharmaceutical and microbiological labs Rodpfx Ajy R Tz Aemmsu

Condition: good (used), Binder FED 400 Heat Cabinet Heat Cabinet / Drying Oven / Laboratory Furnace Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Design: Heat cabinet with forced convection For sale is a pre-owned Binder FED 400 heat cabinet from an industrial facility closure. This heat cabinet is suitable for laboratory, research, development, quality assurance, materials testing, as well as industrial applications. Redpfx Amoy R Axqemeu The unit features electronic temperature control, forced convection, and a stainless steel chamber in a robust industrial build. Technical Data (according to nameplate / manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial-No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (manufacturer information): approx. 145 kg Equipment: Binder FED 400 heat cabinet Forced convection Digital temperature control Electronic controller Stainless steel chamber Double-leaf doors Removable shelves Rear exhaust port Industrial and laboratory design Condition: Used equipment with typical signs of age and use. Visual condition as shown in photos. The device is from ongoing operation. Scope of delivery: Binder FED 400 heat cabinet Removable shelves Scope of delivery as pictured Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Information without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Condition: used, functionality: unexamined, Complete metal testing and materials testing laboratory Industrial quality assurance/testing laboratory as a complete package A fully equipped professional metal and materials testing laboratory from the industrial QA sector is for sale. The package includes, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory scales, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key features: Rjdpfxoy Rglns Ammou - AMETEK / SPECTRO SPECTROTEST TXC02 UV portable OES metal analyzer - GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN - JOMESA filter analysis system for technical cleanliness in accordance with VDA 19 / ISO 16232 - Struers TransPol-5 portable metallographic grinding and polishing system - Struers Rotopol-2 metallographic grinding and polishing machine - Fischer DELTASCOPE FMP30 coating thickness measuring system - List-Magnetik MEGA-CHECK Master coating thickness gauge - Ernst Computest SC portable hardness testing system - Carl Zeiss Jena Neophot metallographic reflected light microscope - Köttermann fume hoods, laboratory benches, hazardous materials cabinets, and chemical cabinets - Extensive laboratory consumables, laboratory glassware, and accessories Complete object description can be found in the documents.

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Rodpfx Aey N R Tajmmou Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber Redpfx Amey N Awqomsu For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: Air-cooled No external water connection required Refrigerant as per label: R452A – approx. 1.2 kg Features: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side cable/pipe port, approx. Ø 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used machine with signs of age and use. Partial rust and corrosion present in the lower housing area. Interior with usage marks. See images for visual condition. Scope of Delivery: ESPEC Climate Test Chamber PL-3KPH One shelf included Delivery as shown Service: Function check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale – Sold as-is without warranty. Subject to change and error.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? Rjdpoy Nynajfx Ammeu 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!