POS Rolf Helle GmbH

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Ljdpfx Aiszv Syfsgorr Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: ready for operation (used), Year of construction: 2003, Make: CHIRON Type of machine: MILL 800 Year of manufacture: 2003 Control system: Siemens SINUMERIK 840D Tool holder: SK 40 x-travel: 800 mm Lredpezvyv Ijfx Aigsr y-travel: 500 mm z-travel: 550 mm Speed range: 12.000 U/min Table dimensions: 1.400 × 550 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 40 Bar

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,330 mm, table load: 400 kg, overall weight: 11,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, tool weight: 6,500 g, number of axes: 5, This 5-axis KOVOSVIT MAS MCV 1000 Speed 5AX was manufactured in 2011. It features a spindle speed range of 20-12,000 rpm and a spindle drive power of 33/45 kW. The machine can handle a maximum tool weight of 6.5 kg and includes a 30-tool magazine. With a table load capacity of 400 kg and dimensions of 5145 x 3665 x 3330mm, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 1000 Speed 5AX machine we have for sale. Contact us for more information. Ledpfezvv D Iex Aigsrr Additional equipment • Including full tooling Machine Benefits Technical Machine Benefits • Feed range (x, y, z): 1 - 15000 mm/min • Table clamping surface: Ø 520 mm • C-axis rotation: 360° • A-axis tilt: ± 110° • Max. Table speed: 20 rpm • Max. Torque (s1/s6): 157/215 nm • Total power input: 55 kva Extra Information Machine still under powerMachine spindle hours are below 9000h. The machine was used mainly in tool mold making and small-batch custom production. It was continuously maintained and serviced as needed. Dimensions Machine Depth 5145 mm

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, spindle speed (max.): 10,000 rpm, This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information. Additional equipment • Double arm tool changer with 20 places • Tool holder: BT- 40 • Spindle oil cooling // Internal coolant supply 20bar • Disc skimmer in coolant tank • Blast air cooling through spindle or from outside • Coolant gun • Spiral chip conveyor • Central lubrication of the guides Machine Benefits Technical Machine Benefits • Duty cycle machine: 6224 hours, duty cycle spindle: 1821 hours • Table clamping surface: 900 x 400mm with 3 t14 slots Extra Information Machine still under power Lsdpfxozvvvke Aigjrr

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Lrsdpezvl Tfsfx Aigor Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Lrjdpfxjzvd U Us Aigsr Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Lrodozvb E Djpfx Aigor - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 860 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, table load: 500 kg, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HARTFORD MVP-8A was manufactured in 2004. It features impressive travels of 860 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine includes a robust table size of 1000 x 560 mm with a load capacity of 500 kg, and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the HARTFORD MVP-8A vertical machining centre we have for sale. Contact us for further details. • Distance table–spindle face: max. 705 mm • Table dimensions: 1000 × 560 mm • Rapid traverse (X/Y/Z): 24 / 24 / 24 m/min (linear guides) • Automatic tool changer (ATC): 24 positions, arm-type Lsdpfjzvbynsx Aigorr • Control system: Fanuc 21i (black and white display) + Hartrol AI100 Additional equipment • 4th axis rotary table Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0l-MC, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HARTFORD PRO-800A was manufactured in 2005. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HARTFORD PRO-800A vertical machining centre we have for sale. Contact us for further details. Lrodozu S Rhjpfx Aiger • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z): 24 m/min • Working feed: 1–10,000 mm/min • Table size: 900 x 470 mm • Spindle power: 7.5 kW / 10 kW • Spindle-to-table distance: 75–705 mm • Tool changer: 24 positions • Condition: Under power, fully functional Additional equipment • Internal cabin flushing (chip flush) • Chip conveyor belt Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2000, 2 x Mikron VCP 800 milling machines, manufactured in 1999 and 2000. Lodpfxjzu Ivao Aigjrr

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Lredpfx Aezt Nyweigjr With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: like new (used), Year of construction: 2015, operating hours: 5,476 h, NIKKEI VH 1010 MACHINING CENTER YEAR OF FIRST INSTALLATION: 2015 TABLE DIMENSIONS: 1,200 mm x 550 mm MAXIMUM ALLOWABLE WEIGHT: 850 kg CNC FANUC Series 0i – MD DISTANCE FROM SPINDLE NOSE TO TABLE: 650 mm RAPID TRAVERSE RATES: 24 meters/min TRAVELS: X: 1010 mm Y: 500 mm Z: 520 mm B: (4TH AXIS, LEHMANN BRAND): 360° SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL COOLANT / COOLANT THROUGH SPINDLE / HIGH PRESSURE WEIGHT: 6,000 kg Ledpfx Aeztqpyeigerr CHIP CONVEYOR NO. 2 PRECISION CHUCKS 4TH AXIS FUME / DUST EXHAUST SYSTEM MACHINE IN EXCELLENT CONDITION

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. Lsdpezq Dk Eofx Aigerr - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Lredpfx Aezq Dkxjigjr Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Lrodpszq A A Hsfx Aigjr - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool interface: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis Lrodpfxjzqfvij Aiger NC swivel head FD function (feed forward) Pallet changer Infrared probe for workpiece measurement Additional magazine with 120 positions

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Machining Center 3-Axis X, Y, Z Mori Seiki Model MV-653/50 Year 1999 CNC Fanuc MSG-803 Phase 3 Lsdpjzp E E Ijfx Aigsrr

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, Year of manufacture: 2015 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20.3/14.5 (40/100%ED) Cooling Cooling through the Spindle Center: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Lrsdjznniajpfx Aiger Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 Air blowing through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: good (used), Year of construction: 1997, CNC milling center HERMLE U 630 S, serial number 12052, year of manufacture 1997, control system HEIDENHAIN, travel ranges: 800 × 560 × 510 mm, spindle speed up to 12,000 rpm, tool holder SK40. Lrsdjznlztspfx Aiger

Condition: good (used), Year of construction: 2001, CNC milling machine HERMLE U 630 T, serial no. 14440, year of manufacture 2001, operating hours 14,701 h, control system HEIDENHAIN, travel ranges: 630 × 500 × 500 mm, spindle speed up to 7,000 rpm, tool holder SK40. Lrodpfeznlzajx Aigjr

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Lodjzmrpuopfx Aigjrr Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11879, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC430, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, 3-axis Hermle C 800 V vertical machining center Robust construction and precision for complex machining tasks Equipped with a tool changer with 30 positions. The machine has already been disassembled and is available immediately. Lrjdszmqhcopfx Aiger The machine operated flawlessly until its last day of use.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 37,336 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: SIEMENS, controller model: 810D PowerLine, workpiece height (max.): 610 mm, total height: 2,750 mm, total width: 2,300 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, overall weight: 4,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,750 mm, number of axes: 3, This 3-axis SPINNER VC810 was manufactured in 2004. It features an X-axis travel of 810 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine is equipped with a maximum spindle speed of 8,000 rpm and an automatic pick-up tool changer with a capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the SPINNER VC810 vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse: 30 m/min • Taper Size: SK40 (DIN 69871A) • Tool Changer: Automatic Pick-Up Tool Changer Lsdpfx Aszlrunsigorr • Linear Guideways on All Axes • Counterweight on Z-Axis • Coolant System • Working Area Light • Oil Mist Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 50 A • Rated Current (IN): 50 A • Chip Conveyor (optional) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2016, x-travel 850 mm y-travel 520 mm Lrsdpfx Aijzkvtxogsr z-travel 475 mm Control 840D sl Operate (CELOS) Siemens turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 20,3 / 14,5 kW max. Torque 121 / 84 Nm tool taper SK 40 DIN69871 table surface area 1.160 x 570 mm max. table load 1.000 kg work height max. 800 mm number of toolpositions 30 pos. tool taper SK 40 DIN69871 max. tool diameter 80 / (130) mm max. tool length 300 mm change-time chip to chip 5,9 sec rapid traverse ( X / Y / Z ) 42 m/min feed speeds max. 36.000 mm/min feed power 6,5 kN Accelaration 5 m/s² total power requirement 18 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC-Machiningcenter Vertical DMG MORI - DMC 850 V New Design - Operating hours: Power-on: approx. 16,703 h / Spindle runtime: approx. 10,506 h - Design variant: WHITE - incl. 4x Smart-Keys (Master, Mode 1, Mode 3, Mode 4) - WITHOUT tools / WITHOUT Clamping-Units

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Lrodezkry Ijpfx Aigjr Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!