Imex Technik AG

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Hnjdpfozlyvtsx Apnep Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: used, Year of construction: 1956, Radial drilling machine RABOMA 12ThL 1000, serial no. 28222, year of manufacture 1956, arm reach approximately 100 cm, with threading device, with mounting cube. Hnsdpfx Aezlpnxepnop

Condition: good (used), Year of construction: 1995, 1 used radial drilling machine Hnsdpfszlgvtjx Apnop Manufacturer: Breda Type: R 55 / 1250 Technical data: Drilling capacity: 55 mm Overhang: 1200 mm Drill spindle taper: MK 5 Drill spindle stroke: 310 mm Spindle speeds, 12 steps: 30 - 1200 rpm Right-hand and left-hand rotation Feed rate, 8 steps: 0.06 - 1 mm/rev Drive power: 4.4 kW Vertical movement of the arm: 705 mm Clamping of the arm and drilling unit: hydraulic Usable machine bed with 4 T-slots: 1325 x 910 mm Coolant system Space requirement: approx. L 2100 x H 2500 x W 1000 mm Weight: approx. 3000 kg

Condition: excellent (used), functionality: fully functional, RADIAL DRILLING MACHINE BREDA 1250 X 55 MODEL R55 TYPE: 125 Hjdpfxoziluve Apnsnp USED MACHINE INTERNAL CODE: SVR 319

Condition: ready for operation (used), functionality: fully functional, RADIAL DRILLING MACHINE Hnjdpfxjziciqs Apnjp DORMAC 1250 X 50 RAPID 50 MODEL USED MACHINE INTERNAL CODE: SVR 219

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Hjdpfxjzg H Aio Apnsnp Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Hsdpfx Aozgdfbepnjnp Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm Hnodpfx Aezgaiiepnop throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck Hnjdpfx Apjzdqklonop column and head locking coolant system machine complies with CE standards Transportation is the responsibility of the buyer. Loading onto the truck will be carried out by us. If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Condition: used, Radial drilling machine MAS VR4A The machine is located in an operating facility in Bremen and can be tested there. Technical data MAS VR 4A Max. drilling diameter in steel (50 kg/mm²) 50 mm Max. drilling diameter in gray cast iron (25 kg/mm²) 60 mm Max. reaming diameter in steel (with guide) 200 mm Largest thread in steel M30 Largest thread in gray cast iron M42 Distance from spindle center to rotary table guide (max.) 1,250 mm Distance from spindle center to rotary table guide (min.) 320 mm Largest hole circle diameter 2,940 mm Smallest hole circle diameter 1,105 mm Distance from spindle to base plate (max.) 1,340 mm Distance from spindle to base plate (min.) 280 mm Vertical adjustment of the cantilever arm 750 mm Horizontal adjustment of the drilling slide 930 mm Swivel range of the cantilever arm 360° Clamping surface of the base plate 1,475 × 900 mm Height of the base plate 200 mm T-slots 3 × 25 mm Hsdpszcy Aiofx Apnenp T-slot spacing 190 mm Diameter of the drilling spindle head 70 h6 mm Spindle mount Morse taper MK4 Diameter of the drilling spindle 40 mm Stroke of the drilling spindle 310 mm Number of speed steps 16 Speed range 28 – 2,500 rpm Number of feed steps 16 Feed range 0.05 – 2 mm/rev Power of the drilling motor 4 kW Speed of the drilling motor 1,420 rpm Power of the feed motor 1.5 kW Speed of the feed motor 1,400 rpm Power of the hydraulic motor 0.55 kW Speed of the hydraulic motor 1,400 rpm Power of the coolant pump 0.125 kW Speed of the coolant pump 2,800 rpm Total weight 2,700 kg Total power requirement 7 kW Machine dimensions (L × W × H) 2,250 × 1,055 × 2,970 mm ____ Our general terms and conditions apply. Furthermore, the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill Hjdpfx Aoy Rznwspnonp MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Hsdpfsy Nd T Hox Apnsnp Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Hnjdpfxjy Ia Azo Apnep Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min Hodpfx Apoy A Tc Donenp output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm Hedsyzq Dpepfx Apnenp weight 7000 kg

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Hnsdpfxjytb Eys Apnjp Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: good (used), Year of construction: 1983, functionality: fully functional, Caser F50 radial drilling machine with quick-change chuck MK3. Hjdpfxjyrytyj Apnjnp

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 30100 € 574.91 € 50 mm MK 5 360 - 1.250 mm 44 - 1.206 (12) U/min Stahl/Guß: M40/M50 2060 mm 995 mm 2240 mm 2300 kg 441 - 1.345 mm 0,06 - 0,2 (3) mm/min 3.7 kW 300 mm 270 mm 1.785 x 785 x 190 mm 0,75 kW Hjdpjynmt Ejfx Apnonp 635 x 520 x 420 mm 2645 mm 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Hnodpoykkhxjfx Apnsp Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: good (used), COLETT / Gamesa - Radial drilling machine, mobile use via crane - Arm approx. 1200mm - Universal angle head - Spindle speeds 95 - 750 rpm - Automatic feeds - Morse taper MK 4 - Arm height adjustable approx. 1400mm - Control cabinet - RETROFIT Dimensions: LxWxH 2x1x2.1 meters / Weight: 1600Kg Hjdpfx Asyc Hkaspnjnp Subject to errors and input mistakes

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Hedpjyba Rwefx Apnonp

Condition: good (used), Breda radial drilling machine Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Speed 30–1200 rpm with swiveling table Hedpfx Aex Rt Ezspnjnp

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, table width: 1,250 mm, table length: 1,120 mm, spindle diameter: 100 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min Hnjdpfxox Hfugs Apnjp MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. Hnsdpfxoxykctj Apnsp The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Hnedpfx Apsxftk Ronsp Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.