Lumonyx Laser

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total width: 4,000 mm, total height: 3,000 mm, total length: 4,000 mm, including KAPPA extraction system Type: MYKRON M 16 Serial number: 00M16.0055 Motor power: 15 kW Speed: 3000 rpm Gkodsxwnd Ajpfx Afied Year of manufacture: 2000 Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection rating: 330 VA FCA D-04895 Falkenberg, loaded onto truck

Year of construction: 1994, condition: good (used), functionality: fully functional, overall weight: 10,000 kg, total length: 12,000 mm, total width: 10,000 mm, total height: 3,500 mm, machine/vehicle number: 91322023, Operating voltage: 400 V, 50 Hz Control voltage: 24 V Connected load: 36 kW Gsdpfjxwnc Sox Afiskd Silo AAYKENS, type: PAT-JET 14/13, serial number: P0018089 Max. working pressure: 10 bar Min. working temperature: -10°C Max. working temperature: +60°C Volume: 31 l FCA D-04895 Falkenberg, loaded onto truck

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Gkedpjxwcvgofx Afisd

Year of construction: 2024, condition: ready for operation (used), An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked. Gksdpfxsxwcvas Afijd

Year of construction: 2025, condition: new, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,500 mm, door opening width: 3,450 mm, door opening height: 2,780 mm, inner dimension height: 2,800 mm, inner dimension length: 6,920 mm, inner dimension width: 3,920 mm, volume flow: 30,000 m³/h, machine/vehicle number: TEC/PR/15, PRISMATEC 15 represents a new generation of spray booth systems — combining mechanical precision, modular European design, and intelligent process control powered by AI. Developed for both industrial and professional finishing environments, it ensures a stable process, exceptional energy efficiency, and consistent surface quality. Each system is fully Industry 4.0-ready, with native integration into ERP / MES / QMS / SCADA environments. Gkjdpfx Afoxv D Sgsijd Key Features - Construction & Insulation: PIR sandwich panels (walls and ceiling), galvanized 1.5 mm steel frame, aluminum doors and panels, raised grid floor and platform (300 mm) for optimal airflow and structural durability. - Ventilation: Dual NICOTRA-GEBHARDT centrifugal fans, providing balanced pressure and uniform air distribution throughout the booth. Equipped with motors ranging from 7.5 kW to 11 kW, delivering total airflow from 25 000 m³/h up to 35 000 m³/h at a static pressure of 800 Pa (for both supply and exhaust systems). - Smart Control (NVIDIA AI-Edge): 14″ industrial HMI, real-time AI algorithms for temperature, pressure, and airflow control; Gun-Idle ECO mode, predictive diagnostics, full data logging, and open API (REST) compatibility via Modbus TCP / OPC UA / MQTT. Seamless integration with ERP, MES, and QMS systems for traceability and predictive maintenance. - Thermal Monitoring (optional): AI-based infrared imaging with object recognition (YOLO), automatic heat mapping, and adaptive curing profiles for reduced energy consumption. - Lighting: Programmable Daylight LED system with precise CRI and brightness control, 45° side and ceiling fixtures ensuring shadow-free illumination. - Heating System: Stainless-steel heat exchanger (oil version) with optional gas / oil / electric sources; heating time to 60 °C ≈ 4–5 min; up to 30 % energy saving through AI-based heat recovery. - Design Details: Hidden lock system (no protruding parts) for easy cleaning, foil application, and minimal maintenance. Model Range PRISMATEC 15/18/22 (7×4 m) – compact, high-efficiency configuration for workshops and industrial applications; full AI-Edge control. LS22 / Custom Series – available upon request for robotic integration, conveyors, or multi-zone temperature control. Connectivity & Reporting Direct ERP / MES / QMS integration (open API). Automated production, energy, and quality reports with OEE / KPI dashboards. Remote diagnostics, data visualization, and cloud management via TEC NOVA AI Cloud. Compliance & Certification Fully European-built, compliant with Industry 4.0 standards. Structural and welding quality certified under EN 1090-1 and EN ISO 3834-3 (TÜV Thüringen Polska). Available Options - Infrared + AI thermal monitoring - Advanced analytics & remote support - Presets for water-based paints - ECO Gun-Idle mode - Robotic or conveyor integration - Multi-zone thermal control (Custom Series)

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 534/39, type of input current: three-phase, power: 40 kW (54.38 HP), Runs on modified alcohol Gsdpjxvrddsfx Afiokd

Condition: ready for operation (used), Walther Trowal TT 280 Centrifugal Finishing Machine with Peel Centrifuge ZA 06 Walther Trowal TT 280 Centrifugal Finishing Machine: Gross volume: 280 liters Power: 15 kW Walther Trowal ZA 06 Peel Centrifuge: Cleaning capacity: 2,000 l per hour Drum sludge volume: 28 l Centrifugal force: 2,417 g Dirty water tank: 1,500 liters You are welcome to schedule an inspection. We can also organise affordable shipping for you! You will receive a proper invoice. Gsdpsxvplfefx Afijkd For customers outside Germany, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from the technical data and errors in item descriptions may occur and are subject to change.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, table length: 600 mm, table width: 1,000 mm, overall weight: 300 kg, total width: 1,480 mm, total height: 900 mm, Equipment: type plate available, Technical specifications: - 80 Watt Synrad CO2 laser source - Machine dimensions: 1480x900x1120 mm - Working area: 1000x600 mm - Max. workpiece height: 230 mm - Aluminum honeycomb cutting table with vacuum function - 2'' focus lens incl. focusing gauge and nozzle - Optional lens set: 1.5'' focus lens - 2.5'' focus lens - 4'' focus lens - Clean-Tech dust protection system - Servo motors (max. 3.2 m/sec) - Autofocus with Microsonic sensor - Assist air incl. compressed air compressor - LED interior lighting - Laser class 2 Gkjdpjxvb Eksfx Afied - Power supply 230V - Weight 300 kg - JL Cockpit laser software - JustAir POR extraction system to JL 10.6 extraction with 640 m³/h performance

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Gksdjxuvk Ejpfx Afisd - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, Vibratory Finishing Machine ROSLER SDD 100 G Drum Diameter: 800 mm This machine is used for the processing and finishing of workpiece surfaces by means of mechanical and chemical methods. The process is based on the relative movement of workpieces, abrasive media, and an aqueous compound solution, during which the abrasive media remove material from the surfaces. Manufacturer: Rösler Application Area: Surface processing and finishing (e.g., grinding, deburring, polishing) Godext Hmhopfx Afiskd Technology: Vibratory finishing technology, in which workpieces are processed with abrasive media in an aqueous compound solution.

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Gjdpfxoxtprts Afiskd

Condition: good (used), Small sandblasting system Gksdpfx Afsxr Az Esiod Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures)

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Gksdpfxsxpiw Ue Afijd Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: good (used), Flexibox Lapping Machine Gkedpfx Aexphwtjfisd Rotary Table Dia: 1000mm 3 Conditioning Rings (450mm Dia) Machine Guards

Condition: excellent (used), Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Gsdpoxnnbvofx Afiekd Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: JM325D, HGH start hole EDM machine, fully functional incl. documentation for sale. Gsdpjxnba Ejfx Afijkd

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 022607, Lavatubi La Chatre mod. 50 Year 2002 Gjdjxmgy Ispfx Afiskd Operational

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. Gedexl Hpmepfx Afiokd ✅ Capacity up to 800 l/h ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations ✅ Reliable German manufacturer In very good condition.

Condition: good (used), FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from FOBA. Godpjxlq Exefx Afiokd The sensor is designed for use in YAG laser marking systems. Technical Details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / Laser Control Component Laser Class (System Use): 4 Wavelength: 1064 nm Laser Power (System Use): 70 W Pulse Power: 10 kW Pulse Duration: 70 ns Application: Spare Part / Component for FOBA Laser Marking Systems Condition: Used, Working Buy FOBA FD84S sensors and other items at great prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. Godjxlii Aepfx Afijkd The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site.

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Gedpfx Afoxghn Tsijkd

Condition: ready for operation (used), Struers LaboPol-5 Laboforce-3 Grinding and Polishing Machine Laboforce-3: Rotational speed: 250 RPM Applied force range: min. approx. 5 N - max. approx. 40 N LaboPol-5: Disc diameter: 200-230 mm Speed range: 50-500 RPM You are welcome to arrange an inspection appointment. Gkjdpfx Ajxfuhkofied We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Interim sale reserved. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Year of construction: 2011, condition: ready for operation (used), Rübig GN 70/120-DUO Year of manufacture: 2011 The RÜBIG gas nitriding unit is an electrically heated system designed for gas nitriding processes in an atmosphere of pure ammonia or nitrogen mix, as well as for tempering in a pure nitrogen atmosphere at temperatures up to 650°C. The nitriding processes are automatically controlled using defined recipes created via PLC control. Nitrogen is used for purging the system and for cooling after nitriding. Gkodpfx Asxft Ivsfied

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Gkedpfoxd A I Aex Afiod Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, type of cooling: air, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system Gksdpfx Afsxd Az Noiod - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg