Lothar Kaiser Werzeugmaschinenboerse

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm Lodpfx Adeyml T Ij Eehc z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Lhedpfsyl Svaox Ad Esc Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: excellent (used), Year of construction: 2003, TRAVELS METRIC X axis 508 mm Y axis 406 mm Z axis 508 mm Lodpfx Adoyl Ngcj Eohc Spindle nose to table (~ max) 610 mm Spindle nose to table (~ min) 102 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • Tool magazine: 30 stations • Table: Rigid clamping table • Coolant system • Electronic Thermal Compensation (iTNC) • Machine on hours: 11,927 h • Spindle on hours: 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Lodpfx Adjylw Sts Eohc Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Tool taper SK40 DIN69871 Tool shank according to DIN69872 Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Lhedpfxsylpf So Ad Esc Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Machine is connected, can be tested.

Condition: excellent (used), Year of construction: 2016, HAAS VF-4SS machining center, 4.axis Year: 2016 Lhodpfx Aoylmc Isd Eec Description: X Axis 1270 mm Y Axis 508 mm Z Axis 635 mm Spindle Nose to Table max 742 mm Spindle Nose to Table min 107 mm Spindle 22.4 kW Max Speed 12000 rpm Max Torque 122.0 Nm, 2000 rpm Drive System Inline Direct-Drive Taper SK40 Table lenght x width : 1321 x 495 mm T-Slot Width 16 mm Number of Std T-Slots 5 Feedrates Max Cutting 21.2 m/min Rapids 35.6 m/min Tool Changer Capacity 40 positions Max Tool Weight 5.4 kg Tool-to-Tool (avg) 1.80 s Chip-to-Chip (avg) 2.40 s Coolant Capacity 208 L Weight 7500 kg Accessories/options: - 4.axis rotary table, HRT310 - through spindle coolant - coolant tank - spiral chip conveyor - 40 positions tool magazine - Losma filtration system - Renishaw TS27 system - lots of tool holders with tools, SK40 type Under power in our warehouse.

Condition: used, Year of construction: 1997, functionality: fully functional, We are offering a well-maintained Wiest PZ 1200 machining center for sale! Technical Highlights & Key Data: Model: PZ 1200 Travel distances: X=1200, Y=800, Z=400 Spindle: 9000 rpm, SK40, 9kW Control: Heidenhain TNC 426 PB Ledeylaudepfx Ad Eehc Tool changer: 24 positions Condition: The machine is in good, fully operational condition. A demonstration under power can be arranged by appointment. Availability: immediately

Condition: excellent (used), Year of construction: 2002, CNC machining center Hedelius CB 60-1200 Control: Heidenhain iTNC 426 Year of manufacture: 2002 Travel distances: X-axis: 1,200 mm Y-axis: 620 mm Z-axis: 600 mm Lhodpfx Aoyk T D Ajd Eoc Spindle taper: SK 40 Tool magazine: 30 positions Equipment: High-pressure filtration system with through-spindle coolant (IKZ) Chip tray Handwheel Operated exclusively with oil Machine enclosure

Condition: excellent (used), Year of construction: 2016, 5-axis machining centre Hedelius RS605 K -1200 Control: Heidenhain iTNC530 Year of manufacture: 2016 Lhedpoyk S Sxofx Ad Eoc Travels: X-axis: 1,200 mm Y-axis: 650 mm Z-axis: 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of T-slots: 7 (each 14 mm wide) Feed rate X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Rotary/swivel table: Clamping area: Ø 520 mm Spindle taper: SK 40 Tool magazine: 30 positions Spindle speed: 50 - 12,000 rpm Equipment: Kinematics Option Handheld operating unit Sieve filter system KM500 ICS 25 bar Chip conveyor Air blow gun Rinsing gun M&H workpiece probe M&H wireless table probe

Condition: good (used), Year of construction: 2005, Cotrol system Fanuc 21iB. Probe Marposs T36. X ... 1200 mm Y ... 600 mm Lhedpfoyk D R Tex Ad Esc Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm Ledpfxoykb Ipo Ad Eohc - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: MAZATROL, controller model: 640, table width: 650 mm, table length: 1,740 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of axes: 4, This Mazak MTV 655/60N Vertical Machining center was built in 2007. It is operated through a Mazatrol 640 control unit and has 4 axis. The machine works with a spindle speed of up to 6000 rpm. Includes a chip conveyor. Additional equipment Lsdpfx Aoyi El Aed Eshc • Chip conveyor Machine Benefits Technical Machine Benefits • Rapid feed x, y 26 m/min - z 20 m/min • Tool turret 30 positions • Tool shank cat-50 • The mazatrol 640 control is a conversation / dialoog • The 4 axis can be disassembled and is integrated by the cnc

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits Ledpoyi Ekxefx Ad Eohc • Tool turret 24 positions • Equipment various tools • Accessories chip evacuator

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 760 mm, controller manufacturer: HEIDENHAIN, controller model: 426, table width: 710 mm, table length: 1,500 mm, spindle speed (max.): 15,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 40, number of axes: 3, This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is good condition and well maintained. Machine Benefits Technical Machine Benefits • Equipment : flat guides • Accessories chip conveyor • Excellent condition Lhodsyi Eizopfx Ad Ejc Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2008, Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100i Control - CE marking - Fanuc MXP 100i control - Prepared for 4th axis - Year of manufacture: 2008 / Only 1 previous owner, very well maintained / Original paintwork - Travel (X / Y / Z): 1270 x 520 x 540 mm - Rapid traverse (X / Y / Z): 36 m/min / 36 m/min / 24 m/min - Feed rates: approx. 945 IPM (inches per minute) - Distance table surface to spindle nose: 100-645 mm - Worktable: 1350 x 520 mm - Max. table load: 1000 kg - Spindle speeds up to 10,000 rpm - Spindle taper: BT 40 - Spindle motor power: 11.2 kW - Tool changer (ATC): 24 stations / side-mount type - Tool change time: 3.5 s (tool-to-tool) - Electronic handwheel - RS232 interface - Various tool holders - Chip conveyor - Spindle oil cooler - High-pressure pump - Oil skimmer - Work light - Machine bases - Machine documentation Dimensions (L x W x H): 3.5 x 2.4 x 2.2 m / Weight: 7,000 kg Errors and omissions excepted. Lhjdpfxoyi A Ino Ad Ejc

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of manufacture 2018 / Commissioned 2019) The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, allows for the accommodation of large-dimensioned workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of around 22 kW, ensures high metal removal rates and accuracy. The CAT 40 (ISO 40) spindle taper provides broad tool compatibility. The machine is equipped with a state-of-the-art MAZATROL SmoothG control system, offering intuitive operation, fast programming, and high process reliability. The 48-position tool changer enables flexible and efficient production processes, even for complex manufacturing tasks. To ensure optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that delivers high precision, performance, and reliability for industrial manufacturing applications. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Lhodpfx Aeyipy Red Ejc All information without guarantee.

Condition: like new (used), Year of construction: 2021, Technical data XYZ travel: 1270/670/625 mm Table: 1400 x 670 mm Spindle speed: 12,000 rpm Tool magazine: 30 positions Spindle: ISO 40 Control: Fanuc Lhodpoyinpgjfx Ad Ejc Through-spindle coolant (IKZ): 20 bar Chip conveyor

Condition: good (used), Year of construction: 1998, CNC Machining Center TAKUMI V18A Year of manufacture: 1998 Control: FANUC 0-MC Technical specifications: X-axis: 1800 mm Y-axis: 850 mm Z-axis: 750 mm Table size: 2000 x 800 mm Number of T-slots: 5 T-slot size: 22 mm T-slot pitch: 150 mm Distance table–spindle nose: 200–950 mm Spindle speed range: 40–4500 rpm Lhedpfsyingajx Ad Eec Number of magazine stations: 32 Machine weight: 16,500 kg

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, Lodpfsyia Upex Ad Eshc 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min Lsdpfxjyia Tlo Ad Eehc • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale. Travel paths: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Ledpfx Adjyhw Eao Eehc Control: Max5 Spindle taper: SK-A40 Max. spindle speed: 12,000 rpm Transport weight: 4,550 kg Offered on behalf of a client.

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. Lsdpeyhrbuefx Ad Eshc The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: good (used), Year of construction: 2001, Haas VF4 Year of manufacture: 2001 Spindle speed: 7500 rpm Tool changer: 24 stations Including 4th axis Lhedpfsyhpa Ijx Ad Eec

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,200 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, table load: 1,200 kg, spindle speed (max.): 1,200 rpm, tool weight: 7,000 g, number of axes: 3, This 3s Takumi V12s vertical machining centre was manufactured in 2022. It features a robust table size of 1,250 x 650 mm and a maximum load capacity of 1,200 kg, making it suitable for various machining tasks. With a spindle speed of 12,000 rpm and rapid feed rates of up to 24 m/min, it offers efficient performance. Consider the opportunity to buy this Takumi V12 vertical machining centre. Contact us for further details. • Distances: • Floor to table surface: 931 mm • Spindle nose to table: 150–760 mm • Spindle center to column: 700 mm Ledpfx Aeyhcy Uod Ejhc • Table: • Size: 1,250 x 650 mm • T-slots (width x pitch x number): 18 x 100 mm x 5 • Feeds: • Rapid (X/Y/Z): 24 / 24 / 20 m/min • Cutting (X/Y/Z): 1–8,000 mm/min • Manual continuous feed: 0–1,260 mm/min • Optical scales: Yes • Tool magazine (BT40): • Number of tools: 24 • Type: Disc • Max tool diameter: 80 mm • Max tool length: 300 mm • Max diameter with adjacent empty slots: 150 mm • Through spindle cooling system Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2012, Matec 30 L, year of manufacture 2012, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-tool magazine, full enclosure of working area, direct measuring systems, chip conveyor, bellows with steel laminations, 3D probe, laser measuring system. Lhjdpfx Aoyhcm Ujd Eoc