MHS-Werkzeugmaschinen

Condition: good (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 805 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, Motor spindle 159/206 Nm1 Spindle speed 16,000 rpm Tool holder HSK-A 63 Swivel axis cabling GSC Collision monitoring DMC Collision Grob test equipment for kinematic measurement Tool cleaning Electromechanical tool length measuring device Laser Control NT for milling tools (BLUM) Heidenhain TS 640 measuring probe Compressed air supply through the spindle center Switchable coolant pressure for the external coolant nozzles Flushing gun Itolowlrvuohccqtsg Blow-out gun Heidenhain HR 520 electronic handwheel Decentralized work area extraction 800 m³/h Oil skimmer for coolant maintenance Coolant recirculation on weekends Flushing device for the work area floor TM additional tool magazine Rotary distributor in the B-axis rotary table Internal coolant cooling system 4-38 bar Remote machine diagnostics

Condition: good (used), Year of construction: 2012, machine/vehicle number: 15475586744, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, total height: 2,800 mm, total length: 3,800 mm, total width: 3,200 mm, table load: 400 kg, overall weight: 10,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 8,087 h, swivel angle B-axis (min.): -5 °, swivel angle B-axis (max.): 110 °, indexing of C-axis: 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Note: Inspection interval reached – DMG service will be performed within 30 days Islhccewlaxdjqtotg - Transport note: Truck with a width of up to 3,000 mm required

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Ielhccqewku Evotetg Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Tool box CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: new, Year of construction: 2024, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine with completion date 02/2024 HDC3000 with 6 axes - travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 640 with handwheel - NC rotary table for 5-sided machining 1250 mm x 1600 mm - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation - Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque - HSK100 tool changing system / 60 places - 800 mm long tools - Chip conveyor - optimized for 5-sided machining incl. deep-hole drilling - Coolant supply - Internal / external air blow-off device - IKZ 60 bar for deep hole machining Islhccewkfnhoqtjtg - Full enclosure - Large interference circle 2300 mm - incl. fixators - incl. washing gun - incl. warranty - Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 2007, Ref. -No.: 10525 Manufacturer: DMG Type: DMU 60 monoBLOCK Year of construction: 2007 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany - Japan Machine-No.: 115XXXXX X-Travel: 630 mm Y-Travel: 560 mm Z-Travel: 560 mm Table Dimensions (Lengthxwidth): 1000 x 600 mm Tool Taper: SK 40 Ielhswiwizeccqtjtg Tool Piece Magazine With: 24 Pcs./pcs. Turning Speeds: 12.000 RPM Rapid Traverse X-Axis: 30 m / min Rapid Travel Y-Axis: 30 m / min Rapid Traverse (W-Axis): 30 m / min Weight Of The Machine Ca.: 9 t Further information: - Measuring probe - Swivel head and rotary table - IKZ 50bar - 5-axis simultaneous machining Machines can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Islhswiwh Reccqtjtg Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: used, Year of construction: 2022, x-travel 450 mm y-travel 600 mm z-travel 330 mm Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center -Equipment & accessories Itolhccowh Ukteqteg -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, -Tool breakage monitoring, robot cell RS05-2

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, AXILE 5 axis Made in Taiwan Model : G6 Year : 2019 Ijlhccqewhxnvjtjtg Travels : X - 650mm Y - 850mm Z - 500mm Rotery table ⌀ : 600mm Tilting axis A : ± 120 Degree Rotery axis : 360 Degree Magazine tools : 60pcs Control : Heidenhain TNC640 Weight : 12000 kg

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Ielhewhrfzoccqtjtg Tool magazine for 30 tools, SK 40

Condition: used, Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Itelhccjwglnyeqtog Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: good (used), Year of construction: 2011, operating hours: 22,000 h, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total length: 3,000 mm, total width: 2,880 mm, table width: 600 mm, table length: 600 mm, table load: 250 kg, rotational speed (max.): 15,000 rpm, overall weight: 9,200 kg, For sale is a 3+2-axis Emco MaxxMill 500 machining center. The machine is fully functional and is being sold due to downsizing. Technical specifications: Year of manufacture: 2011 Control: Heidenhain TNC 620 Operating hours: 22,000 X travel: 650 mm Y travel: 550 mm Z travel: 500 mm B-axis: ± 100° C-axis: nx360° Spindle distance: 150-650 mm Workpiece support area: 600*600 mm Max. workpiece weight: 250 kg Max. speed: 10,000 rpm Max. torque: 100 Nm Max. power: 20 kW Tool changer: 30-station Tool holder: SK40 Dimensions: 2,880 x 3,000 x 3,000 mm Total weight: 9,200 kg Included in the offer: Chip conveyor (scraper belt), Heidenhain 3D probe, Heidenhain handwheel Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Ielhccqowgc Hmjtjtg Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: excellent (used), Year of construction: 2007, - Year of manufacture: 11/2007 - Control unit: Heidenhain iTNC 530 - Axis strokes: X 650 mm Y 600 mm Z 500 mm - Spindle: 18,000 rpm, ISO 40 attachment (Din 69871) - Tool magazine: 32 positions - Tool magazine expansion ZM 87 with additional 87 tools (total 119 tools) - NC 280 PW swivel rotary table - PW 160 pallet changer with 7 pallets 400x400 mm - Through-spindle coolant supply system IKZ 80 bar - Dredging chip conveyor with right-hand exit - Chip washing gun - Air blast cleaning device - Measuring probe RENISHAW Itolhowga Unjccqtog - BLUM laser tool control system - Electronic handwheel - Washing gun - Thermal compensation - CE mark

Condition: reconditioned (used), operating hours: 3,680 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 12,000 rpm, Spindle replacement in 2021 - approximately 3,680 spindle hours since then (estimate) Submission of a bid obligates the buyer to pick up the machine by May 20, 2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Spindle Speed range: max. 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Tool holder: SK 40 Table Table diameter: 630 mm Max. table load: 500 kg Tool magazine Number of tool positions: 30 Max. tool length: 350 mm Feed & rapid traverse Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 – 10,000 mm/min Control Islhcswgaz Iocqtjtg Control: Heidenhain TNC 426 MACHINE DETAILS Space requirement: approx. 7.0 x 6.0 x 2.7 m Machine weight: 7,500 kg Total power requirement: 44 kVA Operating hours On-time: 89,186 h New spindle running time: 3,680 h (estimated) Total spindle running time: 35,845 h No chucks or vices included in the offer.

Condition: used, Year of construction: 2015, x-travel 630 mm y-travel 560 mm z-travel 510 mm b-axis -125/ +10 ° c-axis 360.000 x 0,001 ° control Fanuc G-Tech 31i table surface area Ø 500 mm turning speed range 12000 U/min max. torque on the spindle 167 Nm power capacity - milling spindle 11/ 7,5 kW internal coolant system feed 70 bar rapid traverse 40 m/min no. of tools in the magazine 90 Stück tool taper HSK 63 A | dimensions 2,3 x 3,65 x 3,0 m weight 10,5 t full 5-axis machining Center. First instalation in 2018 Equipment: Ielhcowfhquecqtetg - NC rotating and swiveling table - full covered - spindle cooling - chip conveyor - filtersystem Knoll and internal coolant - absolut scale - coolant gun - 3D probe Renishaw OMP 60 incl."Easy Probe software" - Memory expansion to 8 MB - Matsuura Pivot Check - control for cutting power - Expansion of Macro Variables from 100 to 600 - 5- axis package (Al Nano Control, G54.2; TCPC....)

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Islhcowcrrdscqtotg Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: like new (used), Year of construction: 2007, operating hours: 19,000 h, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 41 kVA, workpiece diameter (max.): 600 mm, table load: 1,000 kg, rotational speed (min.): 80 rpm, overall weight: 9,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,900 h, spindle motor power: 41 W, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, We offer a 5-axis machine in like new condition. Only 5900 hours on spindle. No scratch on machine body. Machine in 100% condition. Touch probe Heidenhein, Complete documentation, spindle cooler and more than 60 pcs SK40 chucks included (see pictures) Itelowcqtyjhccqtsg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,520 h, General Data Measurements width 1200 mm Measurements depth 1050 mm Measurements height 2000 mm Control Unit Model CELOS (SIEMENS 840D sl) Interface 21.5“ ERGOline Control CNC main language German (English, Italian) Itsljwchvlehccqtsg CNC language customizable Yes Main Drive Spindle speed range 14000 1/min Spindle motor power 14 kW (100% ED) Tool taper HSK64 Laser power 2.5 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Table Outer length 800 mm Outer width 650 mm Tools Slots in storage 60 Type of tool holder HSK64 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Inner cooling system 40 bar, 23 l/min Scraper belt chip conveyor with coolant system 600 liters, paper belt filter Infrared measuring probe Renishaw OMP 60 Version for SK 40 (the probe is automatically inserted into the work spindle from the tool magazine) Rinsing gun with pump 2 bar/40 l/min Oil/emulsion mist separator Tool measurement in the Blum Laser work area MPC Machine Protection Control & 3D quickSET Surcharge for powder feeder Twin System Suction unit with secondary filter stage electronic handwheel Siemens 840D This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW laser power. Next to internal coolant supply (IKZ) it comes with Renishaw measuring probe and Blum tool measurement option. Furthermore it is appreciated for its generously sized work area that is easily accessible, along with travel dimensions of 650 × 650 × 560 mm (X / Y / Z). It is a supremely adaptable 5-axis machine suitable for a wide array of laser and milling tasks, delivering consistently high-quality results without compromise. Application Types Milling

Condition: new, Year of construction: 2025, Functionality: fully functional, total height: 1,300 mm, total length: 2,400 mm, total width: 2,000 mm, number of ink cartridges: 5, color channels: 4, resolution (max.): 1,800 dpi, number of print heads: 4, Equipment: raster image processor, DTF PRINTER 650 CONCEPT PLUS • 4 Heads-EPSON i3200, • Printing width 60 cm • Dimensions 206 x72x130 cm, 140 kg • Automatic color mixing, CMYK+WW • Software: Photoprint Iolhjwbd Hwoccqtstg • PRINTING SPEED: • 4PCS:4 pass 35m2/h, 6 pass 22m2/h, 8 pass 16 m2/h • Automatic head placement • Roll release tensioner with photo sensor • Additional shaker for bottle color • Electric up-down movement • Price of the set Printer 4 heads+Shaker H650: 22.000,00 €

Condition: used, Year of construction: 2017, Alzmetall GS800/5 5 Axis CNC Machining Centre (2017) 5 axis X-Axis 660 mm Y-Axis 800 mm Z-Axis 550 mm Itjlewa Sy Aohccqtog Interference circle diameter 800 mm Distance Spindle up to 650 mm Machine-Table Load 500 kgs Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 16 kW Variable Speed Range max. 10.000 mm-1 Motor-Spindle Torque at CDF 25% max. 102 Nm Heidenham touch screen control Wiring diagram : 2865-95-653991 Machine weight 13,000 kgs Resy filtration system Swarf conveyor Erowa pallet changer model RobotEasy Serial number ERE.3048 Year 2017 Weight 1300kgs

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 45 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece height (max.): 330 mm, workpiece diameter (max.): 520 mm, workpiece weight (max.): 300 kg, total height: 3,108 mm, total length: 2,325 mm, total width: 4,210 mm, table load: 300 kg, rotary table diameter: 650 mm, rotational speed (min.): 25 rpm, overall weight: 10,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very little-used 5-axis simultaneous machining center from Kao Fong KAFO - Heidenhain control - Kinematic Optimization package Islhccowa Sf Eeqtotg - Coolant tank - Internal coolant supply - SK 40 - 24 magazine - Handwheel - Extractor - Chip conveyor - Signal light - 12,000 rpm - Complete documentation - Installation/commissioning/training available upon request

Condition: ready for operation (used), Year of construction: 2019, Main Drive Number of axis 5 Movement X-Axis Movement 600 Y-Axis Movement 400 Itolhccewanl Usqteg Z-Axis Movement 450 Table Table load 1600 kg Additional Equipment Tool Magazine: Included Laser Tool Measurement System: Included Laser Tool Measurement System: Included This 5-axis MIKRON Mill S 600 U was manufactured in 2019. A universal machining centre designed for precision and versatility in complex milling tasks. Consider the opportunity to buy this MIKRON Mill S 600 U universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Control Unit Model iTNC530 Ielhcjv U Eukecqtotg Brand HEIDENHAIN Main Drive Spindle speed range 18000 Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 670 Y-Axis Movement 600 Z-Axis Movement 820 Media Internal cooling Yes Additional Equipment Heidenhain rotary measuring system Heidenhain linear measuring system X,Y,Z This POS H800U Universal Machining Centre was manufactured in 2018 in Germany. It has 5 axis (X = 670, Y = 600 mm, Z = 820 mm / Swivel range -100 to +120 degrees, Rotary table 360 degrees endless) and comes with a HSK-A63 spindle with 18,000 rpm. The machine is operated by a iTNC530 HEIDENHAIN control and is equipped with a Heidenhain rotary and linear measuring system X,Y,Z. As extras it features air through spindle, internal coolant supply 20 bar with belt filter unit, a KESSLER table with diameter 800 mm, tool measurement with BLUM laser and operation mode 4. See tech specs overview as PDF (DE) attached. Application Types Milling

Condition: good (used), Year of construction: 1995, operating hours: 8,585 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, controller manufacturer: Heidenghain, controller model: TNC426, overall weight: 3,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 8,585 h, spindle motor power: 9,000 W, number of spindles: 2, number of slots in tool magazine: 44, Equipment: documentation/manual, rotational speed infinitely variable, Additional equipment: - Tool changer 44-fold V - Full protection cabin - Angled table 530 x 900 mm - Preparation of 4th axis and 5th axis! - Additional Fischer spindle (42'000 min/1)! - Spray cooling Islsv Uqt Ejhccqtstg The machine is in an extremely well-maintained condition!

Condition: used, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl Speed : 20000 rpm Iolhcev Tglzjcqtotg Movement X/Y/Z : 630/530/465 mm Tool holder : HSK 63 In General: Year of construction:2022 Control system:Siemens 840 Dsl Traverse paths X/Y/Z:630/530/465 mm Spindle speed:20,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:20,000 rpm Tool holder:HSK 63 Media feed-through:Blown air + cooling lubricant NC swivel table: B-axis:-90° / +110° C-axis:360° Clamping surface:650 mm Max. table load:500 kg Clamping:Hydraulic Tool magazin: Technology:Chain magazine Number of stations:54 Tool changer:Double gripper Equipment: Measuring systems:Direct in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Tool measurement:BLUM laser Workpiece measurement:Infrared measuring probe Kinematics measurement:Cycle 996 + measuring ball Set-up mode:Electronic handwheel Software options:Simulation, residual material detection, DXF reader

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 180 °, General overhaul in 2025 Overhauls in 2024 by DMG worth €80,000 - All axes (except the Z-axis) renewed - Slide rails replaced - Spindle overhauled The machine is used exclusively for machining aluminum in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840D X-travel: 600 mm Islev St Sxjhccqtetg Y-travel: 700 mm Z-travel: 600 mm B-axis: -30 - 180 ° C-axis: 360 ° Spindle and drive data Spindle mount: HSK A63 DIN 69893 Speed range – continuously variable: 20 - 18,000 rpm Max. torque: 121 / 82 Nm Drive power – spindle motor: 28 / 19 kW Acceleration: 6 m/s² Rapid traverse X/Y/Z: 60,000 mm/min Feed force (X / Y / Z): 10 kN Workpiece and table data Max. workpiece weight: 600 kg Max. rotary table diameter: 630 Ø Table speed range: 40 rpm Number of pallets: 2 Pallet size (l × w): 630 × 630 mm Spindle-to-table distance data Distance spindle center to table (horizontal): 20 - 620 mm Distance spindle center to table (vertical): 120 - 720 mm Distance spindle nose to table (horizontal): -150 - 550 mm Distance spindle nose to table (vertical): -250 - 450 mm Tool magazine Tool magazine with: 60 pcs. Tool change time: 3.7 s Energy consumption and dimensions Total power consumption: 55 kW Machine weight approx.: 12 t Space required approx.: 7.0 × 5.0 × 3.2 m EQUIPMENT - Complete documentation available - Maintenance and service reports as well as all All relevant documentation is available. - Geometry reports from December 2024 are available. - Chip conveyor for efficient chip disposal. - Coolant system with high-pressure cooling (30 bar). - Internal coolant supply for optimal machining. - Pallet changer for uninterrupted operation. - Rotating viewing window for a clear view of the machining process. - Renishaw OMP 60 touch probe for precise workpiece measurement. - Electronic handwheel for convenient operation. - Oil mist extraction for a clean working environment. - Paper belt filter for effective coolant cleaning. - Spindle oil cooler for temperature stabilization.