Bächle-Sägewerkstechnik

Condition: excellent (used), Year of construction: 2013, operating hours: 1,200 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 4,800 mm, overall weight: 980 kg, cutting height (max.): 800 mm, cutting width (max.): 800 mm, total width: 2,000 mm, total height: 2,500 mm, saw drive: 11,000 W, total length: 6,700 mm, input voltage: 400 V, saw band width: 32 mm, Equipment: scorer, Indoor machine, rarely used. 1,200 operating hours. Year of manufacture: 2013. Band saw, stationary, cutting length 4.8 m, with electric motor, 15 HP/11 kW. Cutting thickness adjustment SW-10, electric feed, electric height adjustment, and hydraulic package 5 (log loader, log turner, side supports, compensating rollers, central clamp, 2 down-hold clamps). Including pre-cutter. Several saw bands. Dimensions: length 6.7 m, width 2.0 m, height 2.5 m. Kodsy Sv I Iopfx Aqgjdl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, AUTOMATIC VENEER SPLICER Flat Maximum prism width 700 mm Maximum prism height 850 mm Maximum prism length 4.2 m Main drive motor 55 kW Danfoss frequency converter for the main motor Main wheels - cast iron - rubber in the middle Main wheels - width 100 mm Diameter of main wheels 1050 Lifting/lowering of the splicer spindle Motor power for lifting/lowering 4 kW Double-sided saw - PV 45, length 7470 mm, thickness 1.2 mm + stellite, width 140 mm Electronic infinitely variable feed of the splicer forward and backward with Danfoss frequency switch 1.5 kW+W63 Kedpsy R Tcmofx Aqgedl Digital setting of dimensions with automatic cutting program V-280 - veneer program Hydraulic 40l tank with 13l pump and 4 kW electric motor Complete hydraulic pipes Automatic hydraulic tensioning of the saw + accumulator Hydraulic guide for the saw blade on the left - linear veneer guide + automatic retraction below 100 mm Hydraulic guide for the saw blade on the right - linear veneer guide + automatic retraction below 100 mm Hydraulic arm for pushing lamellas back Additional arm for adjusting lamella pushing Separate control panel from the splicer 8-button 4-position joystick 8-button 2-position joystick + potentiometer Laser 15 mW with holder Camera on the splicer from the front (view of the prism) and start of cutting Automatic water cooling of the saw blade up and down, with water filter, high-pressure water pump Opening for dust extraction - from the front + connection Ø 250 mm Fan 5.5 kW + dust extraction pipe Ø 250 m Central lubrication + automatic electric Wider wheels for feed of the splicer forward and backward and additional protection of switches and track cleaner Welded reinforced track 8500 mm Hydraulic clamp with two cylinders and wedges for prisms 4 pcs Hydraulic lifting/lowering of wedges 4 pcs Hydraulic lifting with automatic roller for prism feed 4 pcs Total lifter 1 pc Hydraulic corner - centering device 3 pcs Turner 3 pcs Automatic output belt SILON 4 m with 1 m extension, + electric motor 1.5 kW - belt lifts and lowers automatically Mechanical roller conveyor for veneer l=4000 mm Inlet ramp (conveyor) for prisms

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to diameter Ø 1250 mm Year of manufacture: 2018 Kdjdpfx Asy Rmx Isqgjl General Remont: 2026 Technical Specifications: • Main motor: 55 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Hydraulic log clamps: 5 X • Hydraulic rollers: 5 X • Angles (90°): 5 X • Standard log turner: 4 X • Outfeed silon conveyor belt for board transport

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner Kedpfx Aqsy Na Hvjgedl – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Kdsdpfx Aqey Iuuxegjl

Condition: excellent (used), Year of construction: 2016, We offer this very good WRAVOR WRC 1150 AC complete sawmill (stationary), year of construction 2016. Manufacturer: WRAVOR Model: WRC 1150 AC Year of construction: 2016 Condition: very good Category ID: 1389 Type ID: 415 Type: complete sawmill (stationary) If you have any questions or need more information, feel free to send us a message or give us a call. Ksdpfxsy Hx I Tj Aqgsdl

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Kdodpjy Hbxhofx Aqgol Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line Kodpfsy Dpnrsx Aqgjdl capacity 75,000 m3 timber per shift. Only one operator required. Lisker control for Ari/Kockums line and edging line as well.

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW New subframe Kdodjy Adl Nepfx Aqgel LINCK centering system VZM LINCK extraction unit CSA

Condition: new, Year of construction: 2025, High-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! 📌 Key features: ✔ strong and stable construction ✔ high precision ✔ high cutting capacity ✔ automatic control ✔ reliable and robust construction ✔ main wheels made from cast steel, dobule bearing (STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135mm Ksdsyz Taaspfx Aqgodl ✔ length of saw blade: 160/180 DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW -110kW, frequency converter optional Saw width: Approx. 4500mm (depending on equipment) Rail width: Approx. 2300mm (depending on equipment) Saw weight: Approx. 23,500 kg (depending on equipment, on length of chassis) Max cutting width (between guides): 1300 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Kdedoyz Ia Ispfx Aqgol Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist.

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron Ksdpfx Aoyzr Tfjqgsdl - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill plant featuring an EWD saw line for efficient industrial log processing. The system combines proven technology with continuous upgrades and is in excellent working condition. Cutting capacity: approx. 120,000 m³ roundwood per year The plant has been regularly serviced, professionally maintained, and is still partially in operation. Inspection during running production is possible by arrangement at any time. Availability: approx. June 2026 Scope of supply Log yard (infeed & preparation): • Sorting, measurement, and debarking line – SPRINGER (Year 2017) • Nicholson debarking machine (Year 1992) • Microtec measurement system (Year 2015) • 30 sorting bins • Cross-cutting plant (Year 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year 1999) • Profile chipping canter PF 19-3SP/V (Year 2003) • Secondary circular saw BNK 225/6 (Year 2003) • Complete mechanisation and control system • EWD Optimes BK-100B edger Lumber sorting & ancillary equipment: Kjdpfx Aqeyza D Eegsdl • 7 sorting bins with stacking system • Complete chip and waste wood removal system • Kiln drying chambers and heating system Your advantages • Complete plant – ready for immediate operation • Proven industrial technology • Regularly maintained and modernised • Highly efficient in operation • Compact and high-performance design • Ideal for industrial lumber production General information • Main components built: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: possible during operation by arrangement This plant represents an economically attractive solution for companies looking for a complete, powerful, and immediately available sawmill line.

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Kdsdsyynq Repfx Aqgjl Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Kodpfeyyd Tnjx Aqgsdl Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. Kdodpfxjyxhq Uo Aqgel - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 5,000 mm, cutting height (max.): 50 mm, cutting width (max.): 300 mm, Equipment: documentation/manual, We offer this very good Brodbaek BCO Edger Infeed Conveyors for sawmill (stationary), year of construction 2012. Manufacturer: Brodbaek Model: BCO Edger Year of manufacture: 2012 Dimensions before Edging: Width minimum: 75mm Width maximum: 300mm Thickness: 15mm – 50mm Kodpfoyw Sx Hjx Aqgjdl Length: 2.1m – 5.0m Dimensions After Edging: Width minimum: 75mm Width maximum: 200mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Waterfall conveyor • Including sub frame for the waterfall conveyor • Height adjustable legs to ensure ease of installation • Designed to singulate the boards • Reject board facility • Dogs designed to pick up 16mm - 38mm thick boards, • Waterfall works automatically with sensors • High Quality Conveyor Chain • Rotating arm to knock off 2nd board as it travels up waterfall • Board singulation controlled automatically by 2 sets of arresting fingers • Accelerate the board • High Quality Conveyor Chain • 12 Sensors from above to measure wane on the boards, • Rollers to ensure the board is fair ended Infeed Kick in chain - all pieces centralised to the infeed chain

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 3,500 kg, saw drive: 22 W, total length: 10,000 mm, input current: 100 A, input voltage: 380 V, If you are looking for an optimizer log circular saw in good condition, please check the pictures. The machine is currently in operation. Unfortunately, we can only source small-diameter logs on the market. Efficiency is optimal only with diameters above 400 mm and log lengths of 4-5-6 meters. Thanks to the circular saw technology, high-quality materials can be produced with maximum yield. Maximum workpiece length: 8000 mm. The log infeed unit is a 4-chain design and can hold 5-6 m³ of wood. The machine is capable of bi-directional sawing. Large circular saw blade dimensions: 550x6.2/3.8x30 Z24+6 FZ. Kdodjyv H Uyjpfx Aqgol

Condition: excellent (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, total length: 45,000 mm, AMIX Line for Thin Log Processing – Pallet Cut Stock Production (IN OPERATION) For sale: Fully functional and well-maintained AMIX saw line (Poland), designed for efficient thin log processing and the production of pallet cut stock / pallet components. --- 📏 Input material: - Diameter: 8 – 45 cm - Length: 2 – 4.5 m --- ⚙️ The line includes: - Automatic loading deck (6 m × 3 m) - Log turner (for log straightening) - Twin edger saw 2 × 30 kW with chipper system - Automatic side board, slab, and waste separation - Conveyor system for side boards and waney lumber - Automatic prism separator - Centering conveyor for prisms - Multirip saw 75 kW - Automatic take-off conveyor after multirip saw - Belt conveyor (width 2.5 m, length 4 m) - Cross-cut saw (4-blade) - Edger saw (2-shaft) - Material separation after edger saw - Complete conveyor system for chip and waste extraction 👉 Wood chipper is not included in the offer --- ✅ Key advantages: - Very compact and efficient solution - Optimized for thin log processing - Ideal for pallet cut stock production - Automated material flow - Low manning requirements (3–4 operators) --- 🚀 Output: - approx. 40 – 60 m³ per 8-hour shift (depends on log diameter and material quality) --- 🔧 Condition: - Line currently in operation - Possibility to see the actual production and performance - Regularly maintained --- Kdodpfx Aqsyvlrksgel 💰 Price: €130,000 (price negotiable for serious enquires) 📍 Location: Slovakia For further information, photos, videos or to arrange an inspection, please do not hesitate to contact us.

Condition: excellent (used), For sale: 3 FINSCAN lines: 1x Finscan camera sorting line Boardmaster HD Kdjdpfsyvhgwsx Aqgol Year of manufacture: 2012 1x Finscan NOVA No need to turn the pieces and without infrared lights. Speed: 200 pcs/min Year of manufacture: 2014 1x Finscan NOVA Camera sorting, speed 200–220 pcs/min. No need to turn the pieces and without infrared lights. Year of manufacture: 2018

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Kdsdpoyub Ahofx Aqgjl

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Kdodpfsyr I Dmjx Aqgel

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth Kodpjyr Dbuefx Aqgodl - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: ready for operation (used), Log band-saw with two band saw units at same machine. The unit is delivered complete with electrical and hydraulic parts. Plus PLC for setting of measurement. Max log diameters 700 mm Kdedpfjypakasx Aqgol Sawing length 6.1 meter

Condition: excellent (used), Year of construction: 2000, ARTIGLIO 1300 bandsaw complete with mechanization Kdsdjyn Nrwopfx Aqgjl