K. Huber AG

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed Pedezwg Rujpfx Ad Sjgr - Thread cutting device

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm Pgodpszwftzefx Ad Ser - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Pgedpfxjzuarme Ad Sjr Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Pgodpfx Adeztdz As Sor Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Pgjdpfx Adezrr Uuo Sjr Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” Pjdpjzpfy Sjfx Ad Segr -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Drilling capacity: Max. 32 mm in steel. Pgedsznkgnspfx Ad Sjr Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau DR 40 Z High-Speed ​​Radial Drilling Machine The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine designed for trade and industrial applications. It is characterized by its high flexibility and a swiveling, extendable arm, enabling fast and precise machining of workpieces. Technical Specifications Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Tapping capacity: Max. M33 in steel and M45 in cast iron. Tool holder: MT 4 (Morse Taper 4). Spindle stroke: 200 mm. Reach: Variable from 320 mm to 1140 mm. Workpiece height: Max. approx. 700 mm. Table size: 1200 x 750 mm. Speed ​​range: 45 to 2240 rpm. Feed rate: 0.075 to 0.6 m/min. Drive power: Approx. 6 kW. Weight: Approx. 1.8 to 2.0 tonnes. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Pedpfx Aoznkd Tjd Sogr You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Donau Danuflex-128 High-Speed ​​Radial Drilling Machine A manual high-speed radial drilling machine from the renowned German manufacturer DONAU Werkzeugmaschinen. This class of machine is characterized by an extremely flexible, smooth-moving swivel system and is primarily used in tool and fixture making, as well as in single-part and small-batch production. Technical Specifications Tool holder: MT4 (Morse Taper 4) Clamping table: 500 x 1055 mm Maximum reach: 1120 mm Spindle stroke: 160 mm Column diameter: Ø 150 mm Speed ​​range: 45 – 2240 rpm (electrically selectable steps) Feed range: 0.075 – 0.3 mm/rev Motor power: 1.5 / 2.2 kW Total weight: approx. 1,800 kg Additional equipment: Integrated thread-cutting unit "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Podpfx Aszni T Hjd Sjgr You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine Pjdpfjzl Ufcjx Ad Ssgr

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 Pedpfx Adjzkbqvs Ssgr throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Psdpfx Adjzhualj Sjgr Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Pedpfxjzgvmqo Ad Sogr Available immediately from stock.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Pedpfx Aozfwh Hsd Segr Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 x-travel 2500 mm throat 1000 mm Pedpfozfqmpsx Ad Sogr 1000/2800 mm weight 3,7 t

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Technical data Manufacturer: HKS Type: 34MG Year of manufacture: 1994 Drill spindle mount: MK 4 Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Psdpfxszbr Ibe Ad Sogr Drill spindle stroke: 170 mm Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Pgodpoy Uv Tvefx Ad Ser Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Pedoy Ttrtjpfx Ad Segr Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used) Manufacturer: Mikrosa Year of manufacture: 2001 Type: SRB 35 Drilling capacity: - Steel: 35 mm - Cast iron: 40 mm Thread cutting: - Steel: M20 - Cast iron: M24 Spindle taper: MK 4 Spindle speed: 20 – 2800 rpm, infinitely variable Automatic feed: infinitely variable Spindle stroke: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Connected load: 7.8 kW Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm Weight: approx. 2000 kg Hydraulic clamping Thread cutting device Pedpjy Skrzjfx Ad Sjgr Depth stop Lateral clamping surface Drill chuck 2 gearbox stages The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: new, SPS gear shift control card New for old For self-installation or installation by one of our service technicians Pjdpfsy Rkkhsx Ad Segr

Condition: new, Spare parts for Donau high-speed radial drilling machines Donau DR Donau Danuflex Donau Danumeric Donau Danusys Pgjdoy Ri H Iopfx Ad Sjr Donauflex Donaumeric

Condition: like new (used), Suitable for your Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Pgjdpfxoy Ri Hno Ad Ssr

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Please contact us if the gear stages are no longer functioning correctly as intended. Pjdpfx Aoy Rfzued Ssgr

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Psdsy I Ua Iopfx Ad Segr Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Model: DR 40-Z Serial number: 1146-3 Pjdpfxjy Dn E Ns Ad Segr If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. This is a used machine, therefore we sell under exclusion of any warranty.