MPM - Machinery s.r.o.

Year of construction: 1990, condition: ready for operation (used), Punching force: 250kN, max. overlength dimensions X/Y: 4000mm/1000mm, working dimensions X/Y: 2000mm/1000mm, product thickness range: 0.8mm-3mm. Including tool cassette and setup material. Documentation available. An on-site inspection is possible. Lredpfoympdwjx Ad Esh

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Lredpfsymm D Isx Ad Esh Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Year of construction: 2025, condition: new, functionality: fully functional, electric motor power 2.2 kW, motor speed 1400 rpm, rolling speed 6.9 m/min, pressure of rolls on steel plate up to 1.2 mm, additional pressing rolls included Lodpfxeymc Ucj Ad Ejrh

Condition: used, BRET Press blanking line 830x4 Technical characteristics Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Lrsdsymbg Djpfx Ad Esh Interior diameter without segments: 508 mm Decoiling: from top or from bottom Engine power: 55 kW Elastic yield (for max. thickness): 650 Rm (Mpa) Tensile strength (for max thickness): 900 Rm (Mpa) Scope of supply 1. 4 arms coil loader turnstile 2. Coil carriage 3. Single cantilevered decoiler with hold down roll 4. Opener & centring unit 5. 17 rolls leveller 6. Pit accumulator entry basket 7. Exit basket and pulling unit 8. A 700 tons Press 9. Press side exit (2 bands) 10. Double traverse conveyor with deviation and tilting unit 11. Main stacker 12. Side tacker #1 13. Rollway at stacker’s exit #1 14. Side stacker #2 15. Rollway at stacker’s exit #2 16. Video inspection camera system 17. Pallet introduction rollways for side stackers 18. Magnetic scrap conveyor 19. Operator desks 20. Switch cabinets 21. Hydraulics 22. Existing documentation (to be checked) 23. Available spare parts DELTA Measuring system · Number of measured edges: 2 · Width capacity: 100 - 800 mm BRET Leveller · First level rolls: Ø 55 mm · Number: 17 · Thickness: 0,8 - 4 mm · Driving Power: 110 kW Press · Size of press: 800 mm · Blank length: 100 - 1790 mm · Length tolerances: +/- 0,25 mm · Pressure: 320 Tn · Maximum speed: 100 m/min Cuts/min with tensile strength = 500 Mpa · 130 cuts/min for minimum length · 80 cuts/min for 500 mm · 52 cuts/min for 1.000 mm · 38 cuts/min for 1.500 mm Engine power: 55 kW Stacker by gravity · Number of tables: 1 · Length: 1750 mm · Chain conveyor · Positions per table: Length 5 & Width 3 · Maximum stacking height (including wood): 650 mm · Kind of pallets: Wood spacers / Square + plank / Square + square · In-line weighing Side stackers by gravity · Number of exits: 2 bands · Length 100-800 · Tilting device · Stacker height 650 · Buffer system while changing stacking column · Pallet input front the back side · Scale In both exits Magnetic scrap conveyor Video inspection system Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm

Condition: used, CUT-TO-LENGTH LINE FIMI 2000x10x30 TECHNICAL DATA Strip width: 750 - 2000 mm. Thickness: 2,5 - 10 mm. Coils - Max coil weight: 30.000 Kg - Inside diameter: 600 - 810 mm - Outside diameter: 1000 - 2000 mm Exit - Adjustable width: 700 - 2000 mm - Stackable length: 1.000 to 12.000 mm - Height of package: Maximum 300 mm - Weight of package: maximum 7 Tons SCOPE OF SUPPLY - Entry coil car - Uncoiler - Guiding plate - Input pinch-roll group - Coil opener - Centring unit - Pressure roll - 6-HI Leveller Lrsdpfx Aoymbgdod Esh - Flying shear - Inspection conveyor - Exit pinch roll - Stacker - Hydraulic System - Pneumatic System - Lubricating System - Electrical Equipment - Existing documentation Strip width: 750 - 2000 mm. Thickness: 2,5 - 10 mm. Max coil weight: 30.000 Kg Inside diameter: 600 - 810 mm Outside diameter: 1000 - 2000 mm Adjustable width: 700 - 2000 mm Stackable length: 1.000 to 12.000 mm Height of package: Maximum 300 mm Weight of package: maximum 7 Tons

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator Lrsdpsymbfyofx Ad Esh 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, nominal power: 5.5 kW (7.48 HP), pipe diameter (max.): 1,600 mm, rotational speed (distance/time): 36,000 mm/min, sheet thickness (max.): 2 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, Equipment: emergency stop, scorer, HVAC – Spiral duct forming machine (SPIRO) for sheet metal, length 120–8000 mm, strip width 137 mm, sheet thickness: galvanized 0.4–1.2 mm / stainless steel 0.4–0.8 mm / aluminium 0.5–1.5 mm / copper 0.5–1.2 mm, speed 1–36 m/min, PLC, cutting with saw blade (4 kW), main drive 5.5 kW. Lsdpfxoykpb Ro Ad Ejrh This machine is the heart of production: it feeds the strip and outputs spiral ducts at high speed. Spiro duct diameter 80–1600 mm. Includes spare guide rollers and strip bars for various duct diameters. More information available on our website. Pictured in transport configuration.

Year of construction: 2016, condition: ready for operation (used), Working dimensions X/Y: 2500mm/1250mm, punching force: 220kN, max. sheet thickness: 8mm, tool stations: 18, operating hours: approx. 46500h. Including GripMaster, ToolMaster, scrap grid clamps and -pallet as well as scissor lift table. Documentation available. An on-site inspection is possible. Expected to be available from May 2026. Lodpfxjykbf Ie Ad Ejrh

Year of construction: 2023, condition: ready for operation (used), Bending length: 3230mm, max. press force: 1300kN, back gauge axes: 6, operating hours: approx. 10000h. Including tool clamping system, BendGuard, crowning system and back gauge system. Documentation available. An on-site inspection is possible. Expected to be available from April 2026. Lrjdpfx Adsykbf Uj Ejh

Year of construction: 1990, condition: ready for operation (used), Press force: 200t, bending length: 3100mm, frame distance: 2750mm, throat depth: 300mm, stroke: 400mm, installation height: 600mm, table width: 200mm, machine dimensions X/Y/Z: approx. 4300mm/2400mm/360mm, weight: approx. 18500kg. An on-site inspection is possible. Lredpoyi E D Eofx Ad Eoh

Year of construction: 1996, condition: ready for operation (used), A hydraulic CNC press brake Trumpf is available. Press force: 500kN, stroke: 215mm, max. operating pressure: 290bar, frame width: 1040mm, working width: 1270mm, installation height: 385mm, back gauge: 860mm. Machine dimensions X/Y/Z: approx. 2000mm/2100mm/2400mm, weight: approx. 4750kg. Documentation available. An on-site inspection is possible. Expected to be available end of May 2026. Lrsdpfoyi E Drox Ad Esh

Condition: used, Max. bending capacity ST 37: At length 500 mm: 1.0 mm Lrjdpfx Adoyinibo Ejh At length 300 mm: 1.5 mm At length 200 mm: 2.0 mm Dimensions, approx.: 1060 x 740 x 1130 mm Weight incl. accessories, approx.: 320 kg

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, total width: 2,500 mm, total height: 2,000 mm, total length: 7,000 mm, cutting height (max.): 900 mm, table height: 900 mm, workpiece weight (max.): 5,760 kg, working width: 2,000 mm, working length: 6,000 mm, Equipment: documentation/manual, Due to model change, a fully operational and well-maintained plasma cutting machine is for sale. Lsdpfx Adjyid Aws Esrh

Year of construction: 2011, condition: ready for operation (used), overall weight: 700 kg, This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2" (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details. • Maximum pipe diameter: 2" gas pipe (60.3 mm) • Pipe slide length: 3,000 mm • Programs: 30 programs × 9 bending angles + correction angle • Material capability: • Stainless steel up to 2 mm Lodjyiavmspfx Ad Eerh • Steel up to 3 mm • Copper and aluminum up to 4 mm • Working hours: 150 h Additional equipment • Included mandrels: • 60.3 mm × 2 mm • 50 mm × 2 mm • 40 mm × 2 mm • 32 mm

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, For sale: Mazak EMC 3015 automatic sheet metal loading and unloading system, Extensible Manufacturing Cell. A new one costs approximately €130,000. The system is practically new. Used with a machine with 2,000 hours of operation, and only occasionally. Manufactured in 2016. High Column model, compatible with the following Mazak machines: Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO Maximum sheet dimensions: 3000x1500mm Maximum sheet weight: 900kg. Unloading station: max. 2000kg. Sheet metal loading queue management system. Colimator-group.pl Lrsdeyh N Rdepfx Ad Eoh

Condition: good (used), functionality: fully functional, Machine data versa 204 Dimensions (L x W x H) (mm): 1500 x 1200 x 1500 Weight (kg): 1500 Technical specifications versa 204 Ljdpoyhxqtofx Ad Eerh Blade length (mm): 200 Variable angle: yes Angle (°): 30 to 135 Max steel thickness (mm): 4 Max stainless steel thickness (mm): 3 Stroke rate: 60 Table dimensions (mm): 1000 x 800 Motor power (HP): 5.5

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 9710, sheet thickness steel (max.): 1 mm, A high-capacity, used SPIRO Delta 1500 – the professional choice for automated segment cutting. This machine is the industry benchmark for high-volume production of segment bends (elbows), combining speed with Swiss engineering excellence. This machine is specifically engineered to cut high-quality developments for: • Segmented Bends & Elbows: From standard to complex multi-segment configurations. • Flat Oval Bends: Specialized cutting for space-saving ventilation systems. • Domes & End Caps: Precise segmenting for various closure types. Lredpsyhmz Nofx Ad Eoh • Diameter Range: Capable of processing fittings from 100 mm up to 1500 mm. • Material Capacities: - Galvanized Steel: 0.4 mm – 1.1 mm - Stainless Steel: 0.4 mm – 0.8 mm

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion Ledoyhfvlspfx Ad Eorh • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Year of construction: 2008, condition: used, functionality: fully functional, We are selling our complete BACH CNC plasma cutting system with a high-quality KJELLBERG HiFocus 280i plasma source (German premium manufacturer). TECHNICAL DATA: Manufacturer: BACH Maschinenbau, Apolda Model: ACBP 3000 MultiCut Year of manufacture: 2008, extended in 2011 Working area: 8,000 x 3,000 mm (extra-large cutting area!) Plasma source: KJELLBERG HiFocus 280i (280A) – professional quality! Control system: myBach CNC with USB Software: cncCUT-Basic + cncCUT-Nest (automatic nesting) Arc-voltage-controlled height control IHT 3000 Complete extraction system with cartridge filter (BGIA-certified) Last servicing: June 2024 SPECIAL FEATURES: ✅ KJELLBERG HiFocus 280i = premium plasma source (new price approx. €40,000!) ✅ Automatic gas console for cutting & marking ✅ 8-metre working length (professionally extended in 2011) ✅ Full documentation available ✅ Consumables available Lodeyhax Ujpfx Ad Esrh CONDITION: The machine was in use until a few months ago. Sale in current condition. ONLY COMPLETE SALE! (Even if you are only interested in the Kjellberg plasma source – the entire system must be purchased) Location: 42899 Remscheid Collection: Heavy-duty transport required, forklift available on site

Condition: good (used), Manufacturer: unknown Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Lsdpfoygv H Eox Ad Ejrh Weight: approx. 0.5 t

Condition: used, Sheet Straightener / Leveler Brand: Procesos del Fleje Model: 6011-E-S2 Lrjdpoydkz Eofx Ad Esh Sheet width: 400 mm

Condition: excellent (used), Working height: 100 mm Lredpfx Adeydbfho Eeh Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Ledpfxoycwrzj Ad Esrh

Condition: excellent (used), Year of construction: 1999, Coil-Ø: max. 2.000 mm Coilbreite: max. 2.000 mm Lrodpfxsycumcj Ad Eoh Coilgewicht: max. 13 t

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. • Cutting capacity: • Cutting length: 3,050 mm • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² Lrjdpfxeycfq So Ad Eeh • Hydraulic system: • Oil volume: 300 liters • Electrical data: • Current type: AC • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796