Siegmund Pietras GmbH

Condition: used, Column Drilling Machine ALZMETALL Type AB 25 SV Machine No. 3456 Year of manufacture: 1993 Drilling capacity: 25 mm Spindle taper: MT 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 65 - 1750 rpm, stepless adjustment Automatic feed: 0.15 mm/rev Motor power: 0.9 and 1.3 kW, pole-changeable Gbjdpfxeyz Dr Hj Acwok Power supply tested: 400 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator drive - Intermediate gear stage for high torque at low speeds - Spindle speed indicator - Coolant system - Table height adjustment by hand crank - Foot switch for spindle ON/OFF - Emergency stop push button - Lighting unit - Machine base with machined workpiece support surface - Quick-action drill chuck ALBRECHT 1 to 13 mm Space requirement (L x W x H): 1200 x 650 x 1900 mm Weight: 400 kg Very good condition

Condition: good (used), Column drilling machine: WMW Saalfeld Gbedpfxoyx Uk Ue Acwjk Type BK 25 Year of manufacture: 1963 Spindle taper: MK 4 Drilling capacity: 32 mm Table: 800 x 600 mm Feed

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm throat 232 mm bore stroke 150 mm Spindle Speed 115 - 2470 U/min. weight of the machine ca. 280 kg Gsdpfsyv N Dqex Acwebk dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: used, bore capacity in steel (diameter) 32 mm Short spindle MK 3 bore depth 175 mm spindle throat 320 mm column diameter 130 mm distance spindle /table 140-790 mm feed 0,1 - 0,16 - 0,25 m/min number of spindle speeds 60-1600 Gedpfoyv I Unsx Acwjbk weight of the machine ca. 450 kg

Condition: new, bore capacity in steel St 60 32 mm bore capacity in cast iron GG 20 38 mm Drilling capacity in St 60 40 mm Gbsdpfx Asyvvptjcwek threading in St 60 M 24 threading in GG 20 M 30 Short spindle MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 515 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117 / 701 mm feed von Hand spindle turning speed - stepless 160 - 2250 U/min total power requirement 1,45/1,9 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 Godpfjyvvn Njx Acwjbk threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Gsdpfx Aoyvvm Secwebk spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm Gjdpfxeyvvmxj Acwsbk column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm Gbodpfx Aeyvvmrecwjk threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, Year of construction: 1970, Column Drilling Machine FLOTT SB32 Gbsdpfx Acoyvr Acewok Spindle mount: MK3 Spindle speeds: 135–770 rpm Round table, diameter 400 mm Overall height: 2 m Weight: approx. 200 kg.

Condition: good (used), Used column drilling machine good condition Continuous/normal drilling capacity 25/30 mm MK3 Gbjdpfx Aoyuvkgocwsk Drilling stroke 120 mm 2 speed ranges up to 1000/up to 2000 rpm

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 180 mm turning speeds 55-1450 U/min Feed 0,1-0,3 mm/U machine. Nummer 5112 table surface area 620x470 mm spindle taper metric 4 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Gsdpoyqvlcefx Acwebk We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm Gbjdpfxsyli Sfs Acwek throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 Gbodpfx Acjygvtxjwek + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1974, machine/vehicle number: 571, Offer 25456 Technical Data: - Drilling capacity: 28 mm - Drill spindle taper: MK 3 - 8 spindle speeds: 100 – 1120 rpm - Table area: 400 x 400 mm Gedpfx Aceyfn Npswobk - Drilling unit height adjustable via handwheel - Minimum / maximum distance table / drill-milling spindle: 300 / 600 mm - Drilling spindle stroke: 120 mm - Drilling spindle outreach: 260 mm - Coolant system - Machine base cabinet with door - Drive: 400 V / 1.5 / 2.3 kW - Space requirements approx.: W 500 x H 1800 x D 950 mm - Weight approx.: 200 kg

Condition: good (used), Description: Robust industrial pillar drill manufactured in the Soviet Union. The STANKO 2H118-1 is designed for workshop use and is suitable for drilling, boring, countersinking, as well as basic thread cutting operations. Exceptionally heavy-duty construction, mechanical gearbox, and long-lasting design. Technical Data (typical version) - Drilling capacity in steel: approx. 23 mm - Spindle taper: Morse taper MT2 - Spindle speeds: 9 steps - Speed range: approx. 90 – 1,400 rpm - Feed: manual - Feed stages: mechanical selection - Motor power: approx. 1.5 – 2.2 kW - Connection: 380–400 V / 50 Hz - Clockwise/Counterclockwise rotation: yes - Spindle brake: mechanical - Depth stop: available - Machine weight: approx. 400 – 500 kg (estimated) - Space requirement: approx. 700 × 800 × 2,100 mm Equipment: - Mechanical gearbox - Solid machine table - Depth stop with scale - Tool ejector - Main switch Condition: The machine is used and shows age-appropriate signs of use. Functionality checked. Gsdpfx Asx U Agcecwobk Visual signs of wear are present, technically solid.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From company liquidation: Gjdpsx Ncfhsfx Acwjbk Gillardon GB 30 V Year of manufacture: 1985 Automatic feed: 0.1/0.16/0.25 mm Stepless speed range from 60–1600 rpm 2-speed motor Work light 170 mm quill stroke 2900 mm reach Table size 480x560 mm – clamping surface 350x440 mm MT 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very quietly and precisely + vices included

Condition: good (used), Year of construction: 1994, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From business liquidation: Gillardon GB 30 V Year of manufacture 1994 Automatic feed 0.1/0.16/0.25 Infinitely variable speeds from 60–1600 rpm RPM counter 2-speed motor Work light 170 mm quill stroke 2900 mm arm reach Table size 480x560 mm – clamping area 350x440 mm MK 3 taper – with Röhm quick-action chuck 3–16 mm Machine height 1980 mm – weight approx. 400 kg The machine runs very smoothly and precisely + vise Gsdsx I A Iaopfx Acwsbk

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed Gbjdpex Iwgkjfx Acwjk

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display Gsdpfx Aox Hh Dwscwsbk - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Gsdpexx Tkwefx Acwobk Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Condition: new, Year of construction: 2025, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 30 m/s - colour: RAL 9007 - belt motor: 400 V 3,75 kW - suction capacity: ca. 630 m³/h - suction motor: 0,37 kW Gsdoxwph Ajpfx Acwebk - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm Gbodpfx Aoxq Rwfjcwjk – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch – 40V

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke / mm total power requirement / kW Gbodpfoxqrhfsx Acwek

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? Gbsdpfx Ajxgdn Aocwsk WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!