ProHa Maschinen

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2528006, Sheet metal shear, 2 m, the blade is new, and maintenance has been performed by Fasti’s service department, including the replacement of the conveyor belts. The Fasti-Matik FM 5.1 S is a modern program control for hydraulic sheet metal shears. · Simple program creation · Clear presentation of the programs · User-friendly program management · 4 controllable axes: · 1 x upper blade · 1 x motor stop · 1 x shear angle · 1 x cutting gap · 4 additional function connections (R1 to R4) · Data input via LCD touch screen · Basic data consisting of information for: · Material strength [N/mm²] · Sheet thickness [mm / Inch*] · Number of program cycles · Program set consisting of information for: · Number of cuts · Dimension of the motor stop * [mm / Inch*] · Cutting length [mm / Inch*] · Shear angle [°] · Cutting gap [mm / Inch*] · Auxiliary function "reverse stop" [yes / no] · Auxiliary function "with sheet holding" [yes / no] · Auxiliary function "open clamp at TDC" [yes / no] Features Gksdpfoz R Dgxjx Aivsc Protection class IP 65 · 11.3“ color LCD touch screen display · Non-volatile memory for machine parameters · Material memory for 20 workpiece materials · Non-volatile memory for 15 programs, each with 20 steps · Max. 99 cycles per cutting sequence · Operating modes: Step Manual Automatic · Information aids: Actual value display, error display · Error detection and display of the error in plain text.

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,400 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 400 mm, overall weight: 26,000 kg, total width: 4,300 mm, total height: 3,444 mm, product length (max.): 4,920 mm, number of axes: 3, This 3-axis GRENZEBACH FSW Machine DSM 3000 was manufactured in 2021. It features a working area with an X-axis of 1,400 mm, Y-axis of 3,000 mm, and Z-axis of 400 mm. The machine has a maximum spindle speed of 5,000 rpm and a rapid traverse of 20 m/min. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 3000 we have for sale. Contact us for further details. • Units available: 2 • Weights: • Basic machine: 18,750 kg • ZC axis: 1,290 kg • Welding head: 10 kg • Control system: 750 kg • Overall machine: approx. 26,000 kg • Electrical: Gkodpfx Aez Ryausivjc • Max. power consumption: 10 kW • Voltage: 400 V • Frequency: 50 Hz • Power supply: 3PH + N + PE • Mains fuse: 32 A • Pneumatics: • Min. line pressure: 6 bar • Connection diameter: 1" • Air consumption: approx. 21 m³/h • Compressed air quality: ISO 8573-1 Class 4.4.1 • Hydraulic system: • Flow rate: 5.1 l/min • Rated pressure: 340 bar • Filling quantity: approx. 15 l • Effective capacity: approx. 11 l • Working area: • Max. rapid traverse: 20 m/min • Max. process speed: 1.5 m/min • Process/operating data: • Process force X/Y: 2.6 kN • Process force Z: 10 kN • Max. spindle speed: 5,000 rpm • Operating temperature: +15 to +35 °C • Max. humidity: 70% • Max. operating time: 24 h/day Additional equipment • Clamping device (approx. 7,500 kg)

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 3 pcs. Narrow slide unit working range: Gkodez Rx Nbepfx Aivec wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 23,250 kg, total width: 3,300 mm, total height: 3,444 mm, product length (max.): 4,923 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis GRENZEBACH FSW Machine DSM 2400 was manufactured in 2019. It features a working area with X-axis travel of 1,400 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 600 mm. The machine has a maximum spindle speed of 5,000 rpm and a total weight of 23,250 kg. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 2400 we have for sale. Contact us for further details. • Weights: • Basic machine: 17,750 kg • Welding fixture: 4,200 kg • Electrical: • Power supply: 400 V / 50 Hz / 3PH+N+PE • Max. power consumption: 16 kW • Pneumatics: • Minimum pressure: 5 bar • Air consumption: 48 m³/h • Speeds: • Max. rapid traverse: 20 m/min • Max. process speed: 1.5 m/min Gksdpfx Aoz Rxhwsivsc • Process forces: • X/Y: 2.6 kN • Z: 10 kN • Noise level: 70–80 dB(A)

Condition: used, Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters tank Bosch Rexroth Hydraulic Power Unit 5.5 kW / 100 liters, Used machine Manufacturer / Integrator: Bosch Rexroth Kft. Motor Manufacturer / Type: Lammers Elektromaschinenfabrik 12AA 132S-4 (IE1) Year of manufacture / Serial No.: 208/2002/15 Drawing No.: ABHAG-100S41-1483-B Hydraulic Diagram: HS51-D434-C Condition: Used, industrial execution Dimensions and capacity: Overall dimensions: 930 x 760 x 2120 mm Tank capacity: 100 dm³ (100 liters) Recommended oil type: HVU-46 Technical and operating parameters: Motor power: 5.5 kW (at 50 Hz) / 6.3 kW (at 60 Hz) Electrical connection: 400/690 V Δ/Y (50 Hz) / 460 V (60 Hz), 11.2/6.5 A Motor speed: 1440 rpm (at 50 Hz) Max. operating pressure (directional valves): pmax = 350 bar Valve manifold execution: Bosch Rexroth 4WE 6 E62/EG24N9K4 directional valves (24V DC) Protection class / Efficiency: IP55 / IE1 Design, Operation: High-quality industrial Bosch Rexroth hydraulic power unit featuring a 100-liter oil reservoir, a 5.5 kW Lammers electric motor, and a manifold stack with 350 bar Rexroth directional solenoid valves. It supplies pressurized hydraulic fluid to drive and control hydraulic cylinders, presses, and automated machinery. Suitable Application Areas: Gkedpfx Asz Rxfpoivjc Hydraulic power supply and control for industrial presses, bending machines, and metalworking equipment. Centralized hydraulic unit for special-purpose machinery, lifting devices, and clamping systems. Multi-actuator control in automated manufacturing lines.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Gksdpfx Aoz N Smdeivoc

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Godpfez N Ahxjx Aivskc Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). Gedez Ny Rkopfx Aivekc • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Year of construction: 2013, condition: ready for operation (used), Machine tool manufactured in 2013. This ABK abk-TP-20-250 features a maximum pressure of 200 bar and a pressing force of 1962 kN. It has a connected load of 30 kW and operates at a voltage of 400V with a frequency of 50Hz. If you are looking to get high-quality pressing capabilities, consider the ABK abk-TP-20-250 machine we have for sale. Contact us for further details. Godpfxsz Nlgwj Aivskc - Total Weight: 42,000 kg- Max. Pressure: 200 bar- Anschlussleistung: 30 kW- Press Force: 1962 kN- Air Pressure: 6-7 bar- Voltage / Frequency: 400V / 50Hz- Fusing: 3 x 80A

Condition: used, functionality: fully functional, Year of construction: 2012, Crimping machine Haeger 416 with base frame and accessories fully hydraulic, energy-saving drive for processing threaded fasteners up to approx. M6 (M8) nuts/threaded inserts and bolts, etc. Gjdpfx Aijz Niahsvjkc patented operator safety system integrated storage option for tools and accessories in the base frame Technical data: Pressure range 1 to 36 kN Repeat accuracy +/- 1% Stroke rate 56/min at 25 mm stroke Overhang 406 mm Stroke length 0-150 mm, variable Drive power 1.5 kW Drive hydraulic Oil capacity 8 liters Power connection 230 V/50 Hz, single-phase Dimensions: Length 1140 mm Width 900 mm Height 840 mm + base frame 1000 mm

Year of construction: 2017, condition: ready for operation (used), ALPHA LASER ALFlak300 M was manufactured in 2017. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The machine offers a movement range of 340 x 320 x 420 mm and a maximum movement speed of 25 mm/s. If you are looking to get high-quality welding capabilities, consider the ALPHA LASER ALFlak300 M machine we have for sale. Contact us for further details. Godpfjz Nfwpjx Aivskc - Laser Type / Wavelength: Nd:YAG, 1064 nm- Average Power: 300 W- Peak Pulse Power: 9 kW- Pulse Energy: 90 J- Pulse Duration: 0.5 – 20 ms- Pulse Frequency: Single pulse – 100 Hz- Operating Mode: Pulsed- Welding Spot Diameter: 0.2 – 2.0 mm (0.05 – 0.5 mm with micro welding option)- Focusing Objective: 150 mm- Movement Speed (X, Y, Z): 0 – 25 mm/s- Movement Range (X, Y, Z): 340 x 320 x 420 mm- Arm Deflection: 1500 mm- Lowest / Highest Working Point: 200 mm / 1500 mm- Observation Optics: Leica microscope attachment with eyepieces (10x magnification)- Dimensions (W x D x H): 1200 x 1200 x 1100 mm- Weight: Approx. 550 kg (manual base / chassis)- Electrical Connection: 3 x 400 V / 50–60 Hz / 3 x 16 A

Year of construction: 1999, condition: used, 1 unit of SCHECHTEL HA200 swivel bending machine Processing length: 200 cm Color: as shown in the pictures, according to the images and on-site inspection Year of manufacture: 1999 Gkodpfx Aioz I Nqcevec Condition: used Location of the goods: workshop Payment method: prepayment by bank transfer Shipping: Self-collection only from the Bischofswiesen location

Year of construction: 1974, condition: good (used), Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head Gjdez Ixx Aopfx Aivekc -Manufacturer: FMW, orbital riveting machine type HN1 -Shaft diameter: 12 mm -Motor: 0.37 kW 1390 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg

Year of construction: 2015, condition: ready for operation (used), total width: 2,200 mm, total height: 3,500 mm, product length (max.): 3,000 mm, BVL's Niagara DFS 800-2T was manufactured in 2015. It features a useful length of 800 mm and a carrying capacity of 150 kg. The machine includes two tanks, each with a volume of 1,100 L, and operates at temperatures between 45 °C and 60 °C. If you are looking to get high-quality cleaning capabilities, consider the BVL Niagara DFS 800-2T machine we have for sale. Contact us for further details. - Useful Length: 800 mm- Useful Width: 635 mm (Max dimensions on nameplate: 800 x 600 x 400 mm)- Useful Height: 100 mm- Charging Height: 950 mm- Carrying Capacity / Charge: 150 kg- Charges / Hour: Approx. 2-4- Tank 1 (Waschtank) Volume: 1,100 L- Tank 1 Heating Power: 36.0 kW- Tank 1 Pump Capacity: 22.5 kW- Tank 1 Pump Pressure: 4.5 bar (13.0 bar max on nameplate)- Tank 2 (Spültank 1) Volume: 1,100 L- Tank 2 Heating Power: 30.0 kW- Tank 2 Pump Capacity: 3.0 kW- Tank 2 Pump Pressure: 2.5 bar- Dryer Fan Power: 2.2 kW- Dryer Heating Power: 30.0 kW- Rotary Drive Power: 0.18 kW- Operating Temperature: 45 °C min / 60 °C max- Cleaning Liquid pH Range: 5.5 min / 11 max- Water Connection: G 3/4- Raw Water Hardness: < 2.5 mmol/l (< 14 °dH)- Raw Water Conductivity: > 250 µS/cm- Compressed Air: Min. 6 bar (according to ISO 8573-1:2010 [5:4:3])- Total Dimensions (W x D x H): 2,200 x 3,000 x 3,500 mm- Operating Voltage: 3 x 400 V / N / PE / 50 Hz / 200 A Godpsz Ixwrofx Aivjkc

Year of construction: 1998, condition: good (used), Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, Orbital riveting machine type HN1B-2 -Shaft diameter: 10 mm -Motor: 0.37 kW 1400 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm Gkodpfoz Ixudex Aivoc -Weight: 119 kg

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Gkjdpfxez Ixh Rs Aivjc Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: used, ROLLING MILL YOM: 2004, Re-Commissioning 2021 ROLL DIMENSION Gsdpfx Asz Irb Djivjkc Roll Dimensions BU Roll – 480 mm Dia x 460mm Face Work Roll – 150mm Dia x 420 Face Speed: max. 700 M/min Back Up Roll Driven Main mill drive: 553 Kw DC Strip thickness range: 3mm – 0.07mm Strip width range: 250mm – 350mm Roll change station Rolling force: 2500KN Max. Strip tension: Gear 1: 320 – 3200kp Gear 2: 160 – 1600kp Max. coil weight: 5 tons Max. coil OD: 1600mm Coil ID: 400/500mm Controls: SPS S7 400 Shape control Roll bending AGC Fume exhaust system PAY-OFF Ground level “L” shape coil car with hold down arm Uncoiler with snubber roll arm Uncoiler drive: Hydraulic motor Seekamp edge control unit 3-roll leveler stand with Peeler table + snubber roll, side guides and hydraulic strip clamp – NEW 2007 LEFT & RIGHT WINDERS Winder drive: 220kW DC (ea) Coil Stand / In-ground coil car Winder with hold down arm Vollmer shape roll with analog VMF 2000 Thickness measurement: Vollmer contact gauge + laser gauge Oil separation: 2 sets of rubbers + 1 set of oil separation rolls (felt) Edge guides + strip clamp 3x Metal oil separation rolls Oil filtration: Manufacturer: Achenbach Buschhuetten Type: Superstack YOM: 2003 Mounted production floor level

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: VT 2573, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Gkjdpfxjz Im Nij Aivsc Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: PFG Machine Tools Model: CL Vumaz X 3000 Machine Type: 5-axis moving column machining center Year of Construction: 2010 CNC Control: HEIDENHAIN iTNC-530 Axis Travels X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm A-axis travel – Tilting head: +95° / -95° C-axis travel – Rotary table: 360° Work area for pendulum machining with vertical spindle: 2 zones of 1,300 × 1,000 mm Rapid traverse rates for X / Y / Z axes: 30,000 mm/min Main Table Table dimensions: 3,200 × 1,060 mm Maximum table load: 2,500 kg/m² Diameter of rotary table: Ø 800 mm Maximum rotary table load: 2,500 kg C-axis with 360° rotation Spindle Spindle taper: HSK-A63 Maximum spindle speed: 18,000 rpm Spindle motor power: 25 / 38 kW Spindle motor torque: 116 / 200 Nm Automatic Tool Changer Magazine capacity: 32 tools Maximum tool diameter with occupied positions: Ø 80 mm Maximum tool diameter with empty positions: Ø 130 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool selection: fixed position Dimensions and Weight Approximate machine dimensions: 5,800 × 3,800 × H 3,500 mm Net machine weight: 24,000 kg Power consumption: 40 kVA Measuring Systems Measuring scales on X / Y / Z axes Automatic tool presetter Renishaw Measuring and positioning system for linear axes Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for high-pressure coolant through the spindle Spindle line cooler Dedicated fume extractor Accessories Set of HSK-A63 tapers Various tools Renishaw tool presetter Dedicated fume extractor 2 magnetic tables Zero points Tank and chip conveyor Washing pumps High-pressure CTS system Spindle line cooler Scales on X / Y / Z axes Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features 5-axis moving column machining center HEIDENHAIN iTNC-530 CNC control Large X-axis travel of 3,000 mm Y and Z axis travels of 1,000 mm Tilting head with A-axis from +95° / -95° Rotary table Ø 800 mm C-axis rotation of 360° Possibility of pendulum machining on 2 zones of 1,300 × 1,000 mm High-speed spindle up to 18,000 rpm Spindle power 25 / 38 kW Maximum torque 116 / 200 Nm HSK-A63 tool holder Automatic tool changer with 32 tools Rapid traverse rates up to 30,000 mm/min Renishaw tool presetter Scales on X / Y / Z axes High-pressure CTS system through the spindle Spindle line conditioning Chip conveyor and washing system Dedicated fume extractor 2 magnetic tables with zero points Complete with a set of HSK-A63 tapers and various tools Gksdez Iaw Tspfx Aivec Complete with manuals, electrical diagrams and CE Declaration

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: ALESAMONTI Model: MCS-100 Category: CNC Boring Machine Year of manufacture: 2010 CNC Control: HEIDENHAIN TCN-530M Machine weight: 17,500 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 3,700 mm Spindle Boring spindle diameter: Ø 100 mm Spindle nose: ISO-50 Tool holder type: DIN 69871 A50 Gear range change: Automatic, 2-speed Maximum spindle speed: 3,000 rpm Spindle motor power: 22 kW Spindle support: 350 mm Spindle extension support included Axis Travels X-axis – Longitudinal: 2,500 mm Y-axis – Vertical: 1,500 mm Z-axis – Transverse: 1,500 mm W-axis – Quill travel: 600 mm B-axis – Table rotation, continuous: 360° Minimum B-axis increment: 0.001° Rotary Table Usable table dimensions: 1,550 × 1,300 mm T-slots: No. 9 – 140 × 22 mm H7 Maximum permissible load: 5,000 kg Table rotation (B-axis): 360° continuous Gsdpfoz Iappjx Aivokc Angular resolution: 0.001° Feed Rates Working feed rates for axes X / Y / Z / W: 20,000 mm/min Rapid feed rates for axes X / Y / Z / W: 15,000 mm/min Measuring Systems HEIDENHAIN optical scales on linear axes Rotary encoder on the table Measuring system for axis positioning control Coolant and Chip Management Coolant collection tank Chip conveyor External washing pumps Coolant pump through the spindle Air system through the spindle Accessories 350 mm spindle support Spindle extension support Various ISO-50 tool holders Square Magnetic chuck Chip tank and conveyor External washing pumps Coolant system through the spindle Air system through the spindle HEIDENHAIN scales on linear axes Rotary encoder on the table Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features ALESAMONTI MCS-100 CNC Boring Machine HEIDENHAIN TCN-530M Numerical Control Ø 100 mm boring spindle ISO-50 spindle mounting Automatic 2-speed gear change Maximum spindle speed 3,000 rpm Spindle power 22 kW X-axis travel of 2,500 mm Y-axis travel of 1,500 mm Z-axis travel of 1,500 mm W-axis quill travel of 600 mm 1,550 × 1,300 mm rotary table Table load capacity up to 5,000 kg Table rotation 360° continuous Table resolution 0.001° HEIDENHAIN scales on linear axes Rotary encoder on the table Coolant and air through the spindle Chip conveyor and washing system Complete with ISO-50 tool holders, square, and magnetic chuck Complete with manuals, electrical diagrams, and CE Declaration.

Year of construction: 2012, condition: used, Machine Description This used profiling line is equipped with a motorized DIMECO S2971 IP uncoiler, manufactured in 2012. Offered by All Metal, this complete industrial unit is designed for continuous sheet metal processing from coils. The vertical uncoiler, with a weight of 650 kg, features an expansion mandrel for holding the strip. The line includes a feeding station, a multi-head roll profiling bench with a safety enclosure, an elevated control walkway with a centralized control panel, and an automatic discharge station. Gjdpfxez H Udfo Aivskc Machine Usage This used profiling machine is suitable for sheet metal processing plants, metal fabrication shops, and manufacturers of metal profiles. It enables the continuous uncoiling, straightening, profiling, and cut-to-length processing of steel strips and various alloys. This equipment is suitable for large-scale production of rails, slides, reinforcements, or custom profiles for the construction, automotive, and metal construction sectors. Special Features / Key Advantages The DIMECO S2971 IP profiling line is distinguished by the quality of design from the French manufacturer DIMECO, a benchmark in strip processing. Its integrated work platform offers optimal ergonomics and excellent visibility of the line. The presence of protective enclosures and a dust extraction system ensures a safe working environment. Available from All Metal, a specialist in used industrial machinery, this profiling line represents a valuable opportunity to modernize a production facility.

Year of construction: 1970, condition: used, Machine description This used MAPE NL300 pedestal grinder is a heavy duty industrial bench grinder designed for metal sharpening and deburring tasks. Offered for sale by All Metal, this machine is powered by a 1.75 HP three phase motor running at 1,500 RPM on 220 or 380 V power supply. It features two grinding stations with adjustable work rests with angle indicators for accurate workpiece positioning. The unit comes complete with an external dust collector system connected directly to the wheel guards to ensure clean and safe operation. Applications This second-hand grinding machine is suitable for metal fabrication shops, maintenance facilities, toolrooms, and general engineering workshops. It is used for tool sharpening, manual stock removal, edge chamfering, and deburring of metallic parts after cutting. Designed to process steel, cast iron, and various alloys, it fits perfectly into production lines and maintenance departments requiring reliable manual finishing operations. Key features / Advantages The MAPE NL300 double ended grinder stands out for its solid cast iron pedestal construction providing outstanding rigidity and vibration damping. Built by French manufacturer MAPE, renowned for robust machine tools, this equipment guarantees high durability. The integrated dust extraction unit is a major advantage for workspace cleanliness and operator safety. Available at All Metal, specialized in second-hand industrial machinery, this used bench grinder represents a cost effective solution for workshop tool grinding. Diam: 300mm Voltage: 220/380 V HP: 1.75 Gsdpfx Aoz H Ubqeivskc Extraction: Yes

Year of construction: 2012, condition: used, Machine description This used OTMT OT101 workshop sandblasting cabinet, built in March 2012, is a glove-box sandblaster on a rigid stand. Its 230 litre working volume takes parts up to about 800 x 500 x 500 mm. It operates at up to 8 bar blasting pressure, with an air consumption of 300 l/min. It features a large protective window (530 x 250 mm), interior lighting, a side access door, two gloves, a blasting gun and a rear connection for a dust extraction hose. Overall size: 830 x 630 x 1500 mm, weight 48 kg. Applications This blast cabinet is used for sandblasting, micro-bead blasting, rust removal, paint stripping and surface preparation before painting or coating. It suits mechanical workshops, body shops, metalwork, fabrication and restoration of old parts. It connects to a workshop air compressor, with the abrasive of your choice. Gjdez H N D Hepfx Aivjkc Key features / Advantages This compact, lightweight workshop cabinet is easy to move and fits in a small space. The built-in abrasive recovery hopper limits material loss. Wear parts (nozzles, gloves, window) are standard references for the OT101, which simplifies refurbishment. Second-hand sandblasting cabinet for sale at All Metal, specialist in used industrial machinery. Height: 160 Depth: 140 Length: 80

Condition: excellent (used), Rotary table, Skoda S80M, 3550x4000 mm Capacity: 80 tons Clamping dimension: 3550x4000 mm Travel: 2500 mm Table indexing: 1 degree Weight: approximately 52 tons Godpfx Aisz H Hzievokc

Year of construction: 2004, operating hours: 4,840 h, condition: ready for operation (used), Machine tool manufactured in 2004. This MYLÄP BLP 600/3S features a power of 2.2 kW and operates at a supply voltage of 400 V. If you are looking to get high-quality capabilities, consider the MYLÄP BLP 600/3S machine we have for sale. Contact us for further details. • Supply Voltage: 400 V • Power: 2.2 kW • CE Certified Gjdsz Hvguepfx Aivekc