A+B Werkzeuge Maschinen Handels GmbH

Condition: used, Year of construction: 2025, plate thickness 1.10 mm ST Roller stands 7.0 Stk. Folding speed 6.0 m/min. total power requirement 2.2 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1200 x 660 x 1030 mm Display machine - like new Never been used (!!) Special price upon request The FALKEN EKM 11 is specifically designed for producing all seams used in the heating and ventilation industry. The sheet metal is formed in a single pass. Features: - 7 stations - 6 seam dies installed Isljwt Drkjhcdwujth - 1 free-moving foot switch - Power cable + power plug - Original operating instructions + CE declaration

Condition: used, Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds Iolhcdwjwt Drdjueth - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: used, Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl Ijlhcewt Dq Tsdwujth wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 2025, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC Itolhewt Dq Hjcdwuoh total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: used, Year of construction: 2025, plate thickness 1.20 mm ST Seam/fold length 1300 mm diameter min 130 / max 1000 mm 0 8.0 bar Contact pressure 1000 kg total power requirement 0.37 kW Itelhcowt Dqysdwuoh weight of the machine ca. 300 kg dimensions of the machine ca. 1720 x 900 x 1650 mm Display machine - like new Never been used (!!) Special price upon request Features: - Electro-pneumatic pneumatic press - For closing folded edges - Easy operation - Pneumatic system equipped with air filter - Hardened folding rollers - 1x freely movable foot switch with emergency stop - Original operating instructions + CE declaration

Condition: used, Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm Ijljwt Dqtshcdwueth total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: used, Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Itslhcdewtryvowuoh Display machine - like new Never been used (!!) Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: used, Year of construction: 1996, pressure 50.0 t chamfer lenght 2050 mm distance between columns 1550 mm dayligth 320 mm Ielhcdewtryiewusth stroke 120 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec column arm 250 mm work height max. 900 mm table width 100 mm connected load 7.2 kW oil volume 90.0 ltr. weight 2600 kg range L-W-H 2250 x 1100 x 2050 mm Equipment: - electro-hydraulic press brake - DELEM CNC control model DA 24e * swiveling control panel, front left * tool & program library - CNC electro-motoric back stop (X axis) - 2x manually adjustable stop fingers * incl. lateral + vertical adjustment (R + Z axis) - 2x front support arms - 1x freely movable 2-hand/foot control - connection cable + plug

Condition: used, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor Itjlhowtrycscdwueh - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: used, Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: Itelhcdjwr Er Ajwush - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: used, Year of construction: 1998, sheet width 2520 mm plate thickness 1.50 mm ST plate thickness 2.50 mm ALU thickness at "Niro-steel" 0.75 mm bending angle max. 180 ° bending speed 5.5 sec / Hub dayligth 215 mm upper clamping bar adjustment 120 mm Adjustment folding beam 25.0 mm engine output 1.12 kW weight 1620 kg range L-W-H 2760 x 1050 x 1060 mm Equipment: - Electric-driven folding machine - Bending angle adjustment via electric potentiometer Iolhcdwjwrmaneujth - 1x used split set of goat's foot tools (H = 80.0 mm) - 2x used upper tool rails (pointed and radius rails) - 2x used bending rails (10.0 mm + 25.0 mm) - Manual lower beam adjustment - 1x freely movable foot control (3 positions) - Manual backgauge with mm scale * Maximum travel 500 mm * Adjustment from the rear with handwheel - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 1995, pressure 100 t chamfer lenght 2550 mm distance between columns 2050 mm column arm 350 mm stroke 315 mm dayligth 585 / 435 mm table height 925 mm ajustment speed 110 mm/sec working feed 10.0 mm/sec return speed 140 mm/sec back stop - adjustable 500 mm traversing speed 180 mm/sec control DNC 880 S oil volume 100 ltr. total power requirement 7.5 kW weight 4600 kg range L-W-H 2700 x 1450 x 2400 mm Machine from a maintenance workshop "Coffee roastery" from Switzerland Well-maintained / good condition (!!) New price in 1995 approx. 90.000 Euro - Inspected condition - Machine video - ?v=b79DLDasiIw ----- BEYELER CNC electro-hydraulic press brake with: * Increased installation height * Increased cylinder stroke * Increased throat * Increased feed and retract speed ----- Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC "DNC 880S" control unit * Numerical control - specially designed for sheet metal processing * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tools and product library * Bending sequence displayed graphically in 2D Itelhcowqg Ivodwueh * Possible collisions are displayed * Pivoting control panel, right Front - CNC-controlled axes: Y1 + Y2 + X + R axes + CNC crowning - CNC electro-motorized backgauge (X axis) * with 4 manually adjustable stop fingers - CNC electro-motorized height adjustment of the backgauge (R axis) * Travel range 130 mm * Travel speed 50 mm/sec - CNC BEYELER under-table crowning - BEYELER/BYSTRONIC electro-hydraulic upper tool clamping * Tool system "R" * incl. hydraulic unit including electric motor - BEYELER/BYSTRONIC manual lower tool clamping - Various bending/insertion tools - Electro-motorized oil cooler - 2 front - stable material/sheet support arms - 1 freely movable two-hand control - 1 freely movable foot switch - Side guard (protective grille) - Rear guard (Protective grille) - Original machine operating instructions

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. Itolswpw Epohcdwuoh oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8721 oil volume 240 l voltage 400 V total power requirement 17.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm Good / well-maintained condition With special accessories (!!) Equipment: - NC electro-hydraulic guillotine shear "Sliding Guided" - Heavy-duty / stable welded construction (machine body) - NC ELGO digital control unit "P8721" - NC electro-motorized backgauge on recirculating ball screws - Electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball transfer units in the work table including recessed grips Ielhcdwewpw Eisujth - Front finger guard - foldable at the front - 1x freely movable foot switch - 2x emergency stop buttons at the front - Operating instructions (PDF) Special accessories included: - Pneumatic sheet holding device for thin sheet metal blanks * Movable - on casters - 1x used Set of scissor blades

Condition: used, Year of construction: 1997, sheet width 3020 mm plate thickness 4.0 mm Opening width / upper beam 350 mm Adjustment folding beam 100 mm adjustment of lower beam 80.0 mm bending angle max. 130 ° work height max. 900 mm Control SIEMENS OP 7 voltage 400 V Itslhcdwswplnreush total power requirement 9.5 kW weight 5400 kg range L-W-H 4300 x 2400 x 1780 mm Furnishing: - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: - ?v=C3rwhUDtOKw

Condition: used, Year of construction: 1995, pressure 60.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 255 mm stroke 165 mm dayligth 360 mm table height 890 mm working feed 7.0 mm/sec return speed 85.0 mm/sec back stop - adjustable max. 500 mm Control EURO IV oil volume 100 ltr. total power requirement 5.5 kW weight 4600 kg range L-W-H 2700 x 1450 x 2400 mm Machine from a workshop for the disabled very good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=jileVh2DvNA Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tool & product library * Front right control panel, pivoting - CNC-controlled axes: Y1 + Y2 + X + R axes - CNC electro-motorized backgauge (X axis) * Max. travel 500 mm * Travel speed 180 mm/sec. - CNC electro-motorized height adjustment (R axis) * Max. travel 130 mm * Travel speed 50 mm/sec. - 3 manually adjustable stop fingers - BEYELER electro-hydraulic top tool clamping * Includes adapter from BEYELER to AMADA tools * 1 bending tool set - Manual table crowning - including analog value scale * Adjustment via hand crank * Includes adapter rail for BEYELER tools - 2 front material/sheet support arms - 1 freely movable two-hand control unit - 1 freely movable foot switch - Side guards (2 hinged doors) Ielhcdwewplnlsusth - Rear guards (1 hinged door) - Operating instructions for machine and control system

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° down holder 21 Stück oil volume 160 Liter Ielhcdwowm Rf Deujth strokes per minute 18 - 31 Control ELGO 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm From a maintenance workshop Good condition (!!) Equipment: - Electro-hydraulic swing cut sheet metal shear - Machine frame = all-steel welded construction - ELGO NC control, control panel at the front left * For positioning the electro-motorized backgauge * Target/actual position value input possible * Adjustment by three-phase motor via toothed belt - Support table with ball transfer rollers * Grip recesses are located between the table plates - Front finger guard - Hydraulically operated sheet metal hold-down clamps - 1x freely movable foot switch - Emergency stop button at the front - 1x movable scrap diverter (at the rear) - Operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks - 1x EHT extra-long side stop with mm scale & support foot - 1x EHT front - movable support arm

Condition: used, Year of construction: 2007, sheet width 3100 mm plate thickness 13.0 mm ST pre-bending 10.0 mm ST diameter of upper rolls 300 mm side roll diameter 270 mm bending speed 4.5 m/min voltage 415 V total power requirement 11.0 kW weight 8200 kg range L-W-H 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 3-roll bending machine - Induction-hardened rolls - Robust machine body + stable welded construction - SIEMENS ELGO digital position indicator * Position indicator for the two side rolls - Freely movable control panel - Curved side roll feed - Electro-hydraulic conical bending device - Electro-hydraulic safety chuck - Pressure gauge/pressure indicator for the rolls - Operating instructions (PDF) * Special equipment included: Itjlhcdwewmf Sxeujh - 2x AK BEND SIDE supports (lateral sheet metal support system) - Bending rolls with profile roll extension * Includes various profile rolls

Condition: used, Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm very well-maintained condition Machine with only approx. 7.700 operating hours (!!) Furnishing: - CNC control OPERATEUR for axes X,Y1+Y2,R1+R2,Z1+Z2 - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z-axis) - Hand control device on the foot switch for manual movement of the axes - freely movable two-hand control & foot switch Ielhcdwswmf Sfouoth - Tool top wedge crowning - type AMADA - various application tools - CE marking - 2x EMERGENCY stop buttons at the front - original documents such as operating instructions * Machine link: ?machineno=1008-9308346 * Machinevideo : ?v=G4oZ0TFcD9c&feature=

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space Itelswmf R Ushcdwujh - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: used, Year of construction: 1975, turning length 1500 mm turning diameter over bed 610 mm turning diameter over slide rest 375 mm Islhcjwlvhzjdwusth number of spindle speeds 9.0 - 1800 U/min. spindle bore 82.0 mm tailstock quill taper MT MK 6 spindle taper DIN 55022 bed width 500 mm Cross slide displacement 455 mm Upper support displacement path 200 mm voltage 380 V total power requirement 25.0 kW weight of the machine ca. 4250 kg range L-W-H 4250 x 1400 x 1600 mm Machine from a maintenance workshop New price in 1975 approx. 40.000 Euro Lathe with precision-ground and induction-hardened bed. Ideal for use in workshops/industrial plants, for example. Features: - Robust, conventional Lathe with drawbar - 1x three-jaw chuck with spare jaws - HEIDENHAIN digital readout - Special control panel * on swivel arm on the lock case - MULTIFIX tool holder with numerous inserts - Machine bed without offset - Hardened and ground guideways - Hardened and ground gears in the headstock - Electromagnetic main spindle brake - 1x robust, adjustable tailstock * including live center - Chip guard on the rear panel - 1x separate motor cooler - 1x separate control cabinet - Coolant system - Original machine documentation

Condition: used, Year of construction: 2018, punching pressure 60.0 t punch diameter 28 in 15 mm punch diameter 38 in 11 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm L-beam 120 x 12.0 mm square edge steel 35.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm Islhjwli E Tocdwuoth oil volume 75.0 l voltage 400 V total power requirement 5.5 kW weight 1440 kg dimensions 1520 x 950 x 1780 mm From a maintenance workshop New price for basic machine including accessories ~ €17.000 Special price upon request Equipment: - Electro-hydraulic profile steel shear - Punching station, flat steel shear, angle/profile steel shear, . notching station * Including special equipment: bending station - Heavy-duty and stable welded construction - Continuously adjustable stroke - Very compact design - Support table at notching and punching station - Side support/storage surfaces - 1x adjustable electrical contact length stop - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg Ielhcdwswk N Nieusth range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: new, table length 2400 mm table width 1200 mm Iolhcowkvl Rjdwusth table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: used, Year of construction: 2010, sheet width 4100 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 350 mm side roll diameter ~ 300 mm bending speed ca. 2.0 + 5.0 m/min oil volume 125 Liter voltage 380 V total power requirement 11.0 kW weight 9150 kg range L-W-H 5600 x 1700 x 1500 mm Very good condition (!!) Current new price including accessories approx. 135.000 Euro Special price upon request Features: - Robust electro-hydraulic 3-roll bending machine - All 3 rolls directly driven via planetary gears Itslhcdwowkvl Djueh - Conical rolling possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Double-sided bending - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all bearings - Sturdy welded steel construction - 1 mobile control panel * with digital position indicators for the side rolls * Control via joysticks - 2 bending speeds selectable - Electro-hydraulic folding bearing for easy adjustment Pipe removal - Pressure gauge / pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)