Bauer Peter

Condition: good (used), Technical Description of the Lumber Repackaging Line Purpose of the equipment: Kwedpfx Asywaxzoaljw The line is designed for automated repackaging of lumber, offering the following operations: - Dismantling of kiln-dried (stickered) packs - Formation of transport (shipping) packs without stickers - Reverse repackaging of transport packs into kiln-dried packs with stickers Functional features of the line: - Automatic feeding of lumber packs - Layer-by-layer dismantling of packs with separation of stickers - Accumulation and formation of new packs according to specified parameters - Automatic placement of stickers during the formation of kiln-dried packs - Adjustable pack dimensions (width, height, length) - Integration with sorting and lumber conveying systems - Capability for continuous operation Processed material: - Softwood and hardwood lumber - Thickness: 16–80 mm - Width: 75–250 mm - Length: 3,000–6,000 mm.

Condition: ready for operation (used), Year of construction: 1999, cutting height (max.): 300 mm, cutting width (max.): 400 mm, saw blade diameter: 710 mm, working width: 400 mm, Schmidler SAB 4 Timber Framing Machine, Year 1999 Machining Capacity: 300x400 mm - Swiveling undertable crosscut saw Saw blade diameter: 710 mm Kwodpfxsyvp Tls Aalsw Rotation angle: 360 degrees Tilt: 0–65 degrees - Offcut ejector - Vertical marking pencil - Universal 4-axis milling unit, 40mm finger cutter, dovetail, 100x350mm cutter - Horizontal drilling unit - Vertical drilling unit Price: €16,000 net (excl. VAT) If you have any questions or need more information, feel free to send us a message or call us.

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. Ksdpfoyvplnox Aaleww The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: excellent (used), Year of construction: 2018, The line consists of: - WEINMANN OPTIMAT WTZ 120/12 L assembly table - WEINMANN WMS 150 - WEINMANN OPTIMAT WTW 110/12 N/L loading/unloading table - Schmalz Jumbo Ergo 140 flexible hose vacuum lifter The WMS150 multifunction bridge is a CNC machine for the automated processing of timber structural elements (walls, roofs, and floors). Machine dimensions: - Length (X-axis): approx. 3,000 mm - Width (Y-axis): approx. 6,200 mm - Height (Z-axis): approx. 3,000 mm - Workpiece width: approx. 3,200 mm - Main spindle: 18.5 kW with automatic tool changer - FLEX5 indexing system Tool set for WMS tool changer consisting of: - 3-flute universal roughing cutter - Drilling unit - Saw unit - Marker with ballpoint pen technology HSK - Saw unit NL 55 mm HSK63F - Saw unit NL 105 mm HSK63F Gluing system - Holder for PUR gluing unit - PUR one-component adhesive unit (1K) with 6 application nozzles Fastening and assembly unit - Automatic height adjustment for fastening device - Holder for ADUNOX screwdriving unit - ADUNOX-TRS screwdriving unit Bridge extension Tool holder beam with integrated Y-axis Sliding guide with U-profile for the bridge Increased X-axis drive dynamics Energy supply system via cable drag chain End position monitoring for handling systems Wheel and sliding block lock, right side of portal Homatic powerControl V2.0 control system Remote control for WMS150 with potentiometer Mobile extraction unit 3.0 kW Kjdpfx Aeytyuasaleww Electrical cabinet cooling unit Less than 1,000 operating hours

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power of the milling unit: 11 W, saw blade diameter: 450 mm, working length: 12,000 mm, working width: 3,500 mm, Essetre Multiwall XS with 5-axis milling unit, 11 kW, 1,000-18,000 rpm, liquid-cooled 22 kW inverter. Working length 12,000 mm, working width 3,500 mm, working height 400 mm. 3 pcs. clamp-nailing units incl. Beck wood nailing unit. Double-sided automatic retractable reference stops. 8-position rotary tool changer. Pneumatic system with 12 clamping elements. Saw unit 450 mm. Chainsaw unit. Built-in NC-controlled butterfly turning table up to 4,000 kg. Projection laser to project the wall onto the machine table. Extraction system with floor duct. The machine is connected and ready for demonstration. Available at short notice. Kodpfx Aoyq S Itoaljww

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: Kwjdpfx Aajynwx Eoljw - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions!

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 4,400 mm, Used CNC joinery machine by HUNDEGGER, model PBA, year of manufacture 2003. It can process element sizes up to 4.40 m width, 16.50 m length, and 240 mm thickness. Pre-cutting of elements is carried out with the 5-axis chainsaw and re-planed with a roller milling cutter. All processing units, except for the 5-axis circular saw retrofitted at the end of 2010, can handle panel thicknesses up to 240 mm. The 5-axis circular saw can cut continuously up to approximately 240 mm panel thickness at standard feed rates. Equipment: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW - Vertical milling unit 22 kW - Vertical milling unit 22 kW Kedpsylxfujfx Aaleww - Vertical drilling unit 4 kW - Gantry width: 6960 mm - 18 m guide rail - Processing table height: 700 mm - Frequency converter for 35 kW - Without processing table – it can be self-constructed from cross-laminated timber Dismantling and collection to be arranged by the buyer.

Condition: good (used), High-speed timber strapping system Plastic strapping system Fromm Kwedsylw T Depfx Aalew

Condition: excellent (used), 4 spindles: bottom/right/left/top Kedpfx Aaeylv S Soljww Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Year of manufacture: 2021 Weight: 2550 kg

Condition: ready for operation (used), functionality: fully functional, Fully operational. Test and inspection possible. Kodpeykt Tdsfx Aalsww

Condition: new, Year of construction: 2025, functionality: fully functional, Infeed line for a cross-longitudinal planer. Kedpfx Ajykrvqjaloww Material feeder unit before the planer. Inclined outfeed receiver with cross-transfer function for components.

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 22,000 mm, total length: 22,000 mm, saw blade diameter: 760 mm, working length: 22,000 mm, working width: 650 mm, Description: For sale: K2 650mm CNC machining centre, year 2005, 5-axis machine, ideal for industrial carpentry, timber framing, and woodworking applications. Machine fully serviced, operational, and in regular use. Key Features: • 5 axes • Automatic workpiece turnover system • Infeed 22 meters / Outfeed 20 meters • Integrated crosscut saw with pneumatic end-of-chain clamping • Saw blade Ø760 mm (360° rotation) • Universal cutterhead Ø350 mm – thickness 80 mm • Universal cutterhead Ø350 mm – thickness 45 mm (additional) • Universal cutterhead Ø350 mm – thickness 100 mm (additional) • Universal cutterhead / router Ø40 mm • Universal cutterhead / dovetail milling (cutter Ø45/60 mm) • Vertical router (cutter Ø8 to 30 mm) • Inclined horizontal drilling unit (0 – 45° angle), max drill length 650 mm Ksdpfx Aaoyimi Holoww • Horizontal drilling unit, max drill length 650 mm • Vertical drilling unit, max drill length 460 mm Condition & Services: • Comprehensive overhaul completed in June 2024 • Industrial cabinet PC Pyramid with Windows 10 installed 18/11/2025 (invoice available) • New operator console as of 04/2022 • Machine in daily working condition • Option for dismantling and reassembly by manufacturer – estimated cost: €25,000 (includes installation and hotline support) If you have questions or require further information, please do not hesitate to contact us by message or phone.

Condition: used, Year of construction: 2011, operating hours: 3,440 h, functionality: fully functional, machine/vehicle number: 91, We are offering this very lightly used Krüsi Krüsimatik G1, year of manufacture 2011, with only 3,440 operating hours. The machine is available immediately. Manufacturer: Krüsi Maschinenbau AG OFFER - KRÜSIMATIC by Krüsi G1 5-axis machining centre Wood passage: 420x200 mm 5-axis saw unit 5-axis horizontal milling unit 5-axis vertical milling unit Drilling unit Chain mortising unit Discharge roller table 8 m Discharge roller table 8 m (two units listed) CNC control system with cooling unit Compressed air tank Includes complete tooling Operating manual 1 used timber machining line from KRÜSI, type Kruesimatic G1 Year built: 2011 Can be used with all common timber construction software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail router Processing from right to left 6-sided machining without having to turn the timber! Weight: 5.5 t BTL interface for office connection or manual input directly at the machine For increased cutting performance, the feed speed is frequency-controlled and optimised for various crosscuts Platform height without floor pit: 920 mm Offcuts and chips fall into a mobile bin included The system only needs to be connected with plugs to the electrical cabinet Max. timber cross-section: 200 mm x 420 mm System set up and ready for demonstration AVAILABLE IMMEDIATELY The complete system fits on a MEGA trailer Located in 8842 Unteriberg and ready for demonstration Dismantling / Transport / Installation Auf der Maur GmbH Machinery transport Sale from location Waagtalstrasse 42, 8842 Unteriberg, as inspected, without warranty or guarantee. Payment due immediately in full upon receipt of invoice, without deduction. The system can only be collected after full payment has been received. As-is sale with no statutory warranty, guarantee or liability of any kind. Kwedpfxoyfwbns Aalew "All warranty claims, to the extent permitted by law, are excluded. In particular, rescission and reduction are excluded."

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier Ksdpeyfhi Njfx Aaloww - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Ksdpfxoyb Rxlo Aalsww Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) Kwedpeya Dc Iofx Aaljw - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Kwedpfox Ehmaox Aalew

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade Ksdpfxsxx T Rdj Aaloww - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: used, Year of construction: 2021, Dimensions of the blocks:​ Length : 114 mm [4.5 in] to 914 mm [36 in] Kwedpsxxw U Hsfx Aaljw Width : 38 mm [1 1/2 in] to 203 mm [8 in]​ Thickness : 16 mm [5/8 in] to 63 mm [2 1/2 in] ​ Production Input : Up to 200 lugs per minute Output : Up to 15 press cycles per minute

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m Kwodpfxexxhwlj Aalow • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE Ksdjxwt Igjpfx Aaljww 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, For sale: CORALI line for the production of thin-walled box bottoms. A complete CORALI line is offered, including: Debarking machine, veneer manufacturing machine, conveyor for automated assembly of thin-walled box bottoms. Specifications: Debarking unit output: 🔹 3–6 m³ with log length 850 mm 🔹 26–30 m³ with log length 550–650 mm (per 8-hour shift). Line capacity: 🔹 6,300–10,500 bottoms (veneer thickness 4 mm) 🔹 8,100–15,500 bottoms (veneer thickness 1.4 mm) Kwedpfx Aaoxv St Sjlew

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 Kwedpfx Aexp Ecysaljw _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Motor power: 2 x 15 kW

Condition: used, 60-pocket suction filter with 5 bags, complete with 9 kW suction unit and control panel, used. Height when assembled: 3.65 meters Kwodpfsxlb Siox Aaljw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Kwodoxftaljpfx Aaljw 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.