Drill Plant Ltd

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Rodjzh Dr Depfx Aa Row Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 1998, Press force: 250 t Frame width: 1350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1250x800 mm Side clearance: 640 mm Table height: 800 mm Machine weight (approx.): 36,000 kg Space required (approx.): 3600x2800x5700 mm Maintenance/Service/Spare parts: - 2012: New display screen - 2017: Hydraulic pump completely overhauled - 2017: Sitema fall protection system renewed - 2018: New seals for the press cylinder - 2018: New seals for the control block - 2018: Oil change including tank cleaning - Annual UVV inspection of the press and safety devices Redozhupmspfx Aa Rjw

Condition: good (used), Year of construction: 2004, machine/vehicle number: H7761, functionality: fully functional, operating hours: 9,655 h, power: 380 kW (516.66 HP), input voltage: 500 V, input current: 530 A, input frequency: 50 Hz, stroke length: 1,650 mm, operating speed: 68 mm/s, total length: 7,000 mm, total width: 5,000 mm, total height: 6,000 mm, overall weight: 288,000 kg, SCHULER SHC 1000 Hydraulic Press/Industrial Robot - Nominal force: 1000 kN - Maximum stroke: 1650 mm - Installation height: 2400 mm - Closing speed: 420 mm/s - Working speed: max. 68 mm/s - Working speed at nominal force: 21 mm/s - Tool base area: max. 3900 x 2400 mm - Tool base area: min. 1800 x 1200 mm - Tool height: min. 750 mm Rsdpfozhuf Usx Aa Row - Maximum total tool weight: 50,000 kg - Tool upper part weight: max. 25,000 kg - Permissible load left/right: 800 kNm - Permissible load front/rear: 400 kNm - Includes industrial robot from the manufacturer KUKA, year of manufacture: 2002 - Control system: SCHULER Collection: upon request FCA D-73033 Göppingen - loaded onto a truck

Condition: excellent (used), Year of construction: 2002, EXNER Press EXSBZRD 500/100 Press force: 5,000 kN Tool dimensions: 1,800 x 1,200 mm Max. stroke length: 600 mm Working speed: 16/30 mm/s Rapid traverse speed: 400 mm/s Including feed and transfer unit Rjdozhtmqepfx Aa Row

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Redpfx Aajzhlg Ae Rew Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Rsdpfxjzg Tg Ue Aa Row Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Rjdezg Tg Ispfx Aa Rew Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Redpfx Aszf Ilcja Rsw Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Pressing force 250 kN Installation height: 280 mm Rjdpfx Aaozd Akqj Row Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain hydraulic system revised

Condition: used, Hydraulic press Redpszcy Sqsfx Aa Rjw Ludwig Exner Model H4SP 340 Pressing force: 340 tons Electrical system from 2011 Dimensions approx.: Length 1.5 m, Width 1.2 m, Height 2.8 m The machine is connected and can be inspected and tested in Bremen. _____ Our general terms and conditions apply. In addition, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to businesses and without any warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Nominal force (adjustable): 2 x 400 kN Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Rsdpfxoza Em Ue Aa Rew Optionally, a servo roll feed can be offered and installed.

Condition: refurbished (used), Year of construction: 1997, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, Fully refurbished Schoen double-column press, manufactured in 1997/2025. Press force: 300 kN Installation height: 500 mm Stroke: 300 mm Table: W x D 440 x 320 mm Machine will be fully refurbished: - new control system - new light curtain - hydraulic system overhaul. Rodpfxsy Uv T Ae Aa Rew

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Rsdjy Uiyvspfx Aa Row Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, stroke length: 250 mm, table width: 1,000 mm, table length: 800 mm, 2000 tons hydraulic press 4-columns Table 800x1000 mm Stroke 250 mm Rsdpfx Aoy Sz Rhoa Row

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Rsdpfjy Szwnox Aa Row Table 700x1000 mm

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m Rsdpoy Rutmofx Aa Rjw YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, Pressure 315 t distance between columns 1350 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1200 x 1300 mm Rjdpfx Ajy Rutgja Rew table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 680 mm/s working speed 180 mm/s oil volume 2000 l power requirement 150,0 kW weight 35,0 t Dimensions (WxDxH) 3,3 x 3,3 x 5,5 m height over floor 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning with depth stop (motorized adjustment), hydraulic ram interlocking as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 880 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 530 mm table surface area 830 x 1000 mm hole in the table 260 x 360 mm table height over floor - 850 mm side window 610 mm ram surface 830 x 1000 mm power requirement 55,0 kW weight 14,7 t Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m Redpfxey Ruq Ej Aa Rsw with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in ram (50 t / 10 mm), hydraulic cutting impact cushioning, motoric adjustable depth stop, motoric adjustable table, two-hand operation No foundation pit necessary

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm Redjy Nbtkopfx Aa Row MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Rodpfx Ajy H Ibvsa Rsw

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 400 t, stroke length: 250 mm, operating speed: 320 mm/s, reverse speed: 280 mm/s, table width: 450 mm, table length: 450 mm, table height: 320 mm, ram plate width: 450 mm, ram plate length: 450 mm, distance table to ram: 450 mm, clearance between the columns: 540 mm, oil tank capacity: 400 l, total length: 1,370 mm, total width: 1,470 mm, total height: 2,900 mm, overall weight: 8,700 kg, The hydraulic press is as new. It has 5000 operating hours and has worked at minimal pressures with a maximum of 50 tons. It was regularly serviced by the manufacturer Energo. It is very precise with a pressing depth of 0.01 mm, and offers simultaneous program execution in multiple steps, where you can set the depth, pressure, and pressing speed. It is connected to the power supply and ready to operate. Rsdpfxey E N U Uj Aa Rsw

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition Rsdpfx Aey E Abnja Rjw * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Rsdpfx Aasyz Dr Ts Rew Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm Rsdpfx Aasyzd I Ue Rjw -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. Rjdpfx Asyylhaea Rsw daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg.