Fabrica De Steaguri

Condition: excellent (used), Year of construction: 2014, Short bar magazine, LNS Quick Load Servo III For bars with a diameter of: 6 - 90 mm Chedpe Ah Smfsfx Ap Ded Length: up to 1500 mm

Condition: used, Year of construction: 1999, Design: swiveling Swiveling angle forward: +45° Swiveling angle backward: -45° Table length: 2400 mm Table width: 900 mm Cjdpfo Ah Smbsx Ap Dshd Extendable frame support: Yes, with emergency stop switch Motor: 5/6 kW Number of speeds: 4 Speeds: 3000/4500/6000/9000 rpm Speed selection: belt adjustment + pole change Speed display: LED Taper of milling spindle: MK 5 Milling arbor D: 30 mm Control panel on top, at eye level CENTREXBogenfräsmaster Support for feed device, swiveling Spindle height adjustment: electric Spindle swiveling adjustment: electric Spindle brakes: electric Dust extraction diameter, milling fence: 120 mm Dust extraction diameter, machine: 120 mm Spindle direction: left/right Electric axes: swiveling / up / down adjustment Closing the table opening: insert segment Design of fence jaws: Aigner Integral fence Fence adjustment: manual Milling fence display: milling jaw setting Feed device: Yes, 3 rollers Weight approx.: 1300 kg Dimensions: 3000 x 1300 x 1800 mm Location: Nattheim

Condition: used, KEYSIGHT TECHNOLOGIES Scienlab Battery Test System Keysight SL1000A 1000 V / 900 A / 360 kW – water-cooled Used bidirectional battery test system for testing high-voltage batteries and energy storage devices with controlled charge/discharge cycles and electrical measurement data acquisition. Technical data: Manufacturer: Keysight Technologies / Scienlab Model: SL1000A; 1 channel Declaration of Conformity: 03/27/2019 Acceptance/Calibration documents: 04/16/2019 Electrical output data: Output voltage: 50–1000 V DC Output current: ±900 A DC continuously Output power: max. ±360 kW/channel Current rise time: under 2 ms (typically 1.6 ms) Mains connection: 400 V AC / 50 Hz; 3 (N), PE Rated current: 2 × 290 A Fuses: 2 × 315 A gG Efficiency: over 90%; cos φ over 0.98 Power loss: under 36 kW Chjdpfo Ah Sl Tjx Ap Dod Measurement data acquisition: Voltage: 4-wire; ±0.05% of measured value ±300 mV offset Current: ±0.05% of measured value ±180 mA offset Current ripple: ±0.2% up to 3.6 Aeff. Temperature: 3 × PT100, 4-wire, -50 to +130 °C; ±1 K Measurement and communication data: 8 analog inputs, 0–20 mA, 32 bit Sampling rate: max. 20 kS/s CAN: 500 kBaud; MCM: Ethernet Optional: BMS-CAN, climate chamber Ethernet Cooling water supply: Water-cooled; heat to be dissipated: 36 kW Supply: 6–20 °C; return: max. 30 °C Flow rate at full load: approx. 2 m³/h Supply pressure: max. 6 bar Pressure difference: over 1.5 to 3.0 bar Connections: 1 inch male thread; condensate: 3/4 inch male thread Dimensions and operating conditions: External dimensions (W × D × H): approx. 3820 × 880 × 2500 mm Weight: approx. 2900 kg Protection class: IP54; protection class I Environment: +5 to +40 °C; 30–75 % rel. humidity Operating altitude: max. 2000 m above sea level Equipment: Modular power modules, resonant converter, internal cooling water circuit, cooling unit, DC output, output and mains circuit breakers/chokes, EMC filter, measurement/control unit, insulation monitoring, overvoltage protection, main switch, emergency stop, key switch for test release, signal light. Applications: HV battery testing, battery development, energy storage testing, charge/discharge testing, test benches, research and automotive industry. Documentation: Manufacturer's operating manual, declaration of conformity, acceptance and calibration records from 2019; further documents as shown in the images. No statement regarding current calibration. Condition: Used; optical condition as shown in the images. Scope of supply: 1 × Keysight SL1000A Scienlab Battery Test System; documentation and accessories as shown in the images. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by phone.

Condition: excellent (used), mileage: 257,900 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 545 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, fog lights, fridge, parking heater, power assisted steering, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Lane departure warning system - Radio and audio system - Disc brakes - Sleeper cab - Speed limiter - Stability control - Auxiliary heater - Enhanced engine brake = Special features = XLRTEF5300G395395 = More information = General information Year of construction: 2022 Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Transmission Transmission: TRAXON, 12 gears, Automatic Axle configuration Axle brand: 315/80R22.5 Brakes: disc brakes Front axle: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: leaf spring suspension Rear axle: Dual tires; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: air suspension Cods Ah Sl Nspfx Ap Dehd Functional Load space volume: 545 l Condition Technical condition: very good Optical condition: very good Warranty Warranty: XLRTEF5300G395395

Condition: excellent (used), Year of construction: 2014, Bone Separator Make: Baader Model: 601 Rated at upto 800kg raw material per hr Built 2014 Cjdpfx Aj Ah Sl Eop Dehd Little use 5mm drum Ex fish factory

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2819-1160, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 300 mm Travel range Y-axis: 300 mm Travel range Z-axis: 400 mm Csdpj Ah Slzsfx Ap Dohd Clamping area: 390 × 620 mm Spindle speed: 40–2,500 rpm Spindle taper: SK 40 Quill travel: 60 mm Rapid traverse: 4.0 m/min EQUIPMENT Chip collection tray

Year of construction: 2007, condition: like new (used), functionality: fully functional, BIANCHI SHEET METAL SHEAR, EFFECTIVE WORKING LENGTH 3 METERS, MAXIMUM THICKNESS 6 MM. Chodpfs Ah Slpsx Ap Dod

Condition: used, MAZAK QTN NEXUS 250IIMY Year: 2008 Ceds Ah Sllspfx Ap Dshd Chuck diameter: 250mm Bar capacity: 75mm Control: Mazatrol Matrix Nexus C-axis driven tools Y-axis Max. diameter: 380mm Max. length: 575mm Spindle bore: 76mm Probe Tailstock Chip conveyor Documentation

Condition: excellent (used), functionality: fully functional, mileage: 29,717 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, empty load weight: 2,255 kg, maximum load weight: 1,245 kg, first registration: 11/2024, next inspection (TÜV): 10/2028, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, machine/vehicle number: ZFA250005RG037521, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, rear view camera, second-hand vehicle warranty, sliding door, soot filter, truck registration, Special equipment: Overhead storage in driver's cab, Cargo Plus Package, reinforced rear axle (suspension), full-size spare wheel (incl. spare wheel holder), Traction Plus (electronic traction control incl. ESP), Visibility Plus Package Cedpfx As Ah Slhsp Dohd Other features: Passenger airbag, driver's airbag, trailer stability program, traction control system (ASR), electrically adjustable and heated exterior mirrors, long exterior mirrors for vehicle width 2200 mm, black box (event data recorder, EDR), brake assist, roof antenna, Eco package, electronic parking aid, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assistant, driver assistance system: drowsiness detection, driver assistance system: emergency braking assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keep assist, driver assistance system: lane keeping assist incl. traffic sign recognition, driver assistance system: rollover protection, 180 A alternator, cruise control (including speed limiter), automatic transmission (8-speed), glove compartment with cooling function, infotainment system with 5" color display, DAB and Bluetooth interface, high-roof standard panel van body, fuel tank: 90 liters, black radiator grille, bulkhead, model update (2), engine 2.2 liter - 132 kW Multijet Power turbodiesel, wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, acoustic reversing warning (external warning signal), low emissions according to Euro 6e standard, halogen headlights, sliding door to load/passenger compartment on right, upholstery/fabric seats, cab seats: twin passenger seat, cab seats: driver's seat with armrest and lumbar support, SMART tachograph (4.0), engine start/stop system, rear telecamera, UConnect telematics box, GVWR 3.50 t

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Chjdpfx As Ah Sk Iop Dsd Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Year of construction: 1993, condition: used, Automatic cut and strip machine designed to process various types of wire. Codpfx Ape Ah Sk Ds Dshd

Year of construction: 2018, condition: used, functionality: fully functional, This is an SCC 61 WE combination oven in an electric version, from the premium manufacturer Rational, manufactured in 2018. The combination oven is a unit from the latest SCC series, featuring triple-glazed windows and LED lighting. The unit has undergone a comprehensive inspection and is fully functional. The base pictured is not included in the offer but can be purchased as an optional extra. These are example images. Original images will follow shortly. The unit is available from approximately week 47. The list price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul/inspection and expert cleaning • Tested and fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: approx. 847 x 776 x 782 mm Cjdpfx Apj Ah Skyo Dehd • Minimum door opening dimensions for transport: W x H: 845x850mm • Power connection: V: 400 / kW: 11 / Hz: 50/60 • Capacity: 6 x 1/1 GN • Weight: approx. 110 kg • Serial number: E61SI180082690570 • Year of manufacture: 2018 Condition: used, inspected, fully functional Additional information: • In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) • Care Control - self-cleaning • Core temperature probe • Handheld spray nozzle with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - even overnight • Steaming adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request advice, or would you like to view something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: used, AOI system for automatic optical inspection of assembled components. Chedpfxj Ah Skgj Ap Djd

Condition: used, Year of construction: 2012, operating hours: 73,034 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 634.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Screw compressor, Almig Variable55 Csdpfj Ah Skcox Ap Djhd Converter integrated. 55 kW 13 bar 10.58 m3/min Year of manufacture: 2012 Operating hours: 77,034 h

Condition: ready for operation (used), functionality: fully functional, total height: 1,300 mm, total width: 2,500 mm, total length: 3,500 mm, overall weight: 6,500 kg, LIDKÖPING 4B – Centerless cylindrical grinding machine For sale is a used centerless cylindrical grinding machine from the Swedish manufacturer LIDKÖPING, model 4B. Chjdpfx Ape Ah Si Uo Dod The machine is designed for centerless external cylindrical grinding of rotationally symmetrical workpieces and features a grinding wheel and regulating wheel drive, as well as hydraulic adjustment devices. Technical data: - Manufacturer: LIDKÖPING, Sweden - Model: 4B - Machine type: Centerless cylindrical grinding machine - Power connection: Three-phase, 50 Hz - Grinding wheel diameter: approx. 508 mm - Grinding wheel width: 254 or 305 mm - Grinding wheel drive: 37 kW - Regulating wheel drive: 4 kW - Hydraulic drive: 2.2 kW - Machine weight: approx. 6,500 kg - Machine dimensions: approx. 3,500 × 2,500 × 1,300 mm - Separate hydraulic unit - Workpiece feeding/transport device - SKF lubrication unit - Adjustment handwheels for the machine axes - Grinding area with protective covers - Additional control cabinet Condition: Used industrial machine with signs of wear and tear, paint chipping, and visible corrosion spots due to age and use.

Condition: used, mileage: 201,928 km, power: 353 kW (479.95 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,670 mm, total width: 2,550 mm, Daf XF 530 6x2 Hub reduction. 9,000 kg front axle. Cedpfx Aps Ah Si Ro Dshd 78,000 kg GVW. 390 cm wheelbase. PTO prepared. = Further Information = Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 9,670 kg Payload: 18,330 kg GVW: 28,000 kg Model number: XG 530 FTS 6x2 BOOGIE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, CTS T-50/3800/I – Temperature/Battery Test Chamber Temperature range: -50 to +100 °C | 3,750 liters | water-cooled Nitrogen inertization with O2/CO monitoring and safety door locking Used temperature test chamber from CTS – Clima Temperatur Systeme GmbH. According to the previous owner, it was used for HV battery testing; suitable for temperature and material testing, environmental simulation, and quality assurance. TECHNICAL DATA Type: T-50/3800/I Temperature range: -50 to +100 °C Temperature deviation over time/space: up to ±0.5 K each Heating: approx. 4 K/min (-40 to +80 °C) Cooling: approx. 3 K/min (+85 to -40 °C) Change rates according to the manufacturer, without test specimen, measured in the supply air. REFRIGERANT Pre-cooling: R507, 6.5 kg Cooling: R23, nameplate rating 15 bar / 5 kg Both circuits: max. permissible overpressure 25 bar, test pressure 27.5 bar Chjdj Ah Si Hepfx Ap Djd ELECTRICAL 400 V / 3/N / 50 Hz; rated power 20.4 kW; rated current 36.3 A On-site protection: 50 A slow-blow; protection class IP54 DIMENSIONS AND WEIGHT Test volume: 3,750 liters Internal dimensions (H × W × D): approx. 1,000 × 2,500 × 1,540 mm according to the previous owner Installation drawing: dimensions in plan view 2,840 mm; system height approx. 2,450 mm. Complete external dimensions to be confirmed. Test chamber approx. 2,700 kg; control cabinet approx. 200 kg; total approx. 2,900 kg without test specimen/additional equipment. EQUIPMENT Digital temperature control with 32-bit controller, LCD setpoint/actual value display, manual and program operation, stainless steel test chamber (1.4301), stainless steel heating element, radial fan, lockable double-leaf door, water-cooled refrigeration unit, separate control cabinet. Test chamber floor load: 500 kg. SAFETY AND CONNECTIONS Nitrogen inertization, O2 residual content and CO monitoring, Dräger-Polytron sensors according to the previous owner, ATEX-tested flame arrestors according to manufacturer’s documents, electromagnetic door locking, mechanical emergency opening, safety temperature limiter, overpressure switch in the refrigeration circuit, fan motor current monitoring. RS232; potential-free fault report contact. HV connections and cooling water connections for test specimens according to the previous owner. Max. heat radiation: 5,000 W at -40 °C. Cooling water: R 1 inch, approx. 2.5 m³/h at ΔT 10 K and full load. Nitrogen: R 3/4 inch, operating pressure 3–6 bar. Condensate drain: R 1 inch internal thread. Sound pressure level: below 70 dB(A) according to the manufacturer. NOTE ON BATTERY TESTING HV battery application and designation of the safety equipment as “Hazard Level 6” according to the previous owner; classification not independently confirmed. CONDITION AND SCOPE OF DELIVERY Used; optical condition according to the pictures. 1 × CTS T-50/3800/I, separate control cabinet and accessories according to the pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, mileage: 71,814 km, power: 96 kW (130.52 HP), first registration: 12/2023, fuel type: gasoline, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: super 95, CO₂ emissions: 153 g/km, fuel tank capacity: 54 l, color: white, gearing type: automatic, number of gears: 7, emission class: euro6, number of seats: 2, total length: 4,490 mm, total width: 1,860 mm, total height: 1,840 mm, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power mirror, sliding door, traction control, = Additional Options and Accessories = - Rear parking sensors - Front parking sensors - Sliding door on the right side - Automatic low beam headlights - Heated exterior mirrors - Passenger airbag - Electric front windows Chjdpfx Ape Ah Si Ae Dsd - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Height-adjustable driver's seat - Keyless entry - Keyless start - LED daytime running lights - Lumbar support - Front center armrest - Multimedia capable - Radio - Radio with DAB - Rain sensor - Rearview camera - Immobilizer - Bumpers in body color - Blind spot monitoring - Traffic sign recognition - Connected services - Partition = Additional Information = General Information Number of doors: 5 Model range: Nov. 2021 - Dec. 2024 Cab: simple Technical Information Torque: 240 Nm Number of cylinders: 4 Engine displacement: 1,333 cc Acceleration (0-100): 10.8 s Top speed: 183 km/h Dimensions Length/Height: L1H1 Weights Unladen weight: 1,334 kg Payload: 676 kg GVWR: 2,010 kg Interior Interior: black Consumption Average fuel consumption: 6.7 l/100km Maintenance, History and Condition APK (Technical Inspection): valid until 12/2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Bull30_4, working width: 3,100 mm, stroke length: 270 mm, distance between stands: 3,200 mm, reverse speed: 40 mm/s, travel distance X-axis: 600 mm, back gauge: 600 mm, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 250 mm, back gauge travel distance Z-axis: 3,200 mm, overall weight: 16,000 kg, total length: 20,000 mm, total width: 40,100 mm, total height: 32,000 mm, warranty duration: 36 months, travel distance Y-axis: 270 mm, travel distance Z-axis: 3,200 mm, pressing force: 250 t, height adjustment type: electric, mount diameter: 3,100 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 40 m/min, space requirement height: 3,500 mm, space requirement length: 2,000 mm, space requirement width: 4,010 mm, table width: 3,200 mm, travel distance R-axis: 250 mm, working length: 3,100 mm, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electric press brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Backgauge: X-R-Z1-Z2 controlled Control: TC15-2D graphics control Front support arms, height adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Further equipment options on request Chodpfxs Ah Sius Ap Ded Warranty: 36 months after installation

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 Chjdpo Ah Siqefx Ap Dod EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: like new (used), Year of construction: 2010, overall weight: 890 kg, For sale: industrial generators by Marelli, in like-new condition. Please contact me for more information. Cedpfx As Ah Siiep Dehd

Condition: used, mileage: 537,116 km, power: 294 kW (399.73 HP), first registration: 12/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, Equipment: AdBlue, air conditioning, crane, cruise control, differential lock, electric window regulation, traction control, = Additional options and accessories = - Lifting axle - Air suspension - Power take-off (PTO) - Radio - Rear view camera - Disc brakes - Sun visor - Tool box = Notes = Man TGS 8x4-4 BL Lift steering axle. 9,000 kg front axle. Engine PTO. Crane: HMF 1943 Z2 Container system: Hyvalift: 26-55 S 26,000 kg. 560 cm. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Rear axle 3: Steered; Suspension: Air suspension Weights Unladen weight: 16,585 kg Payload: 19,415 kg GVW: 36,000 kg Functional Crane: HMF Identification Model number: TGS 36.400 8x4 EURO 6 / Z CRANE Cedpfs Ah Sifsx Ap Dehd = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Color: Red Model number: Container Chedj Ah Sibspfx Ap Ded = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 220 mm, travel distance Z-axis: 650 mm, number of axes: 3, This DMG NEF 400 was manufactured in 2006. It features a maximum spindle speed of 4000 RPM and includes a 12-station tool turret for efficient tool management. The machine is equipped with a manual tailstock and a 3-jaw chuck for versatile clamping. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 horizontal turning machine we have for sale. Contact us for further details. - Number of Controlled Axes: 3 axes (X, Z, C) - Swing Diameter: - Over Bed: approx. 400 mm - Over Cross Slide: approx. 230 mm - Turning Diameter (max.): approx. 200 - 250 mm - Rotary Axis: C-Axis (main spindle indexing / positioning) - Control Unit: Heidenhain EP 4290 TP (Heidenhain Plus panel) - Spindle Speed (max.): 4000 RPM - Apparent Power: 21 kVA - Nominal Current (Jn max): 31 A - Fuse / Total Current: 35 A / FN1 - Operating Voltage: 400 V (50 Hz) - Control Voltage: 230 V / 24 V- Tool Carrier: 12-station tool turret (VDI 30 / VDI 40) - Clamping Device: 3-jaw manual/hydraulic chuck installed Technical Specification Counter Spindle No Codpfx Apo Ah Sh Te Djhd Driven Tools Yes

Condition: excellent (used), Year of construction: 2008, Title: MEP TIGER 352 SX evo Metal Cut-off Saw / Cold Cut Saw – Semi-automatic – Year of Manufacture 2008 Technical Data (Manufacturer's Specifications for the Model): * Manufacturer: MEP, Italy * Model: TIGER 352 SX evo Cjdpfe Ah Sh Njx Ap Dehd * Year of Manufacture: 2008 * Saw Blade: HSS 350 × 32 × 2.5 mm * Motor Power: 1.8 / 2.6 kW * Connection: 400 V Three-Phase * Saw Blade Speeds: 15 / 30 / 45 / 90 rpm * Miter Range: -45° to +60° * Maximum Vise Opening: 190 mm * Cutting Range at 90°: Round material up to Ø 115 mm * Square Material at 90°: up to 95 × 95 mm * Rectangular Material at 90°: up to 180 × 95 mm * Machine Weight: approx. 425 kg * Dimensions: approx. 1,050 × 1,120 × 2,050 mm Equipment: * Semi-automatic sawing technology * Control panel with control unit * Pneumatic workpiece clamping * Swiveling saw table for miter cuts * Coolant system * Robust machine base * Saw blade and other accessories shown in the pictures, available after inspection