Gut Rosenkrantz Bio-Futter GmbH & Co. KG

Condition: ready for operation (used), functionality: fully functional, Grinding length: 600 mm Hfedpfx Ajz Ayrvecgol Grinding width: 250 mm Workpiece height: 450 mm Electromagnetic clamping table: 600 x 250 mm Grinding wheel diameter: 300 x 50 x 76.2 mm Spindle speed - stepless: 800 - 4200 rpm Total power requirement: 4 kW Machine weight: approx. 2.9 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Hfsdpfxoz Ayq Eo Acgsl Fully functional.

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Hfsdpjz Ayqxofx Acgel Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Grinding spindle drive 5.5 kW

Condition: good (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, drill spindle length: 1,250 mm, spindle motor power: 23,000 W, table length: 1,500 mm, table width: 1,100 mm, feed length W-axis: 1,600 mm, 4 side complete machining Swiveling drilling and milling unit DCM Dynamic Collison Monitoring CAM-Model QCK ( Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds / ranges: 6000Rpm Length: 8100mm Width: 6300mm Height: 4300mm Hsdoz Ayqfepfx Acgjfl Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), number of rollers: 3, roller (top) diameter: 130 mm, sheet thickness (max.): 3 mm, - Capacity: 1550 x 3 mm - Top roll diameter: 130 mm Hedez Ayp Iepfx Acgsfl - Roll length: 1550 mm - 380V

Condition: used, clear span: 2,700 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking crossbar: Racking system: Bito Type: PL 38 Included in the scope of supply: 01x Pallet racking crossbar, used Material color: green Box profile: 127 x 50 mm Crossbar type: PT27.127LN Agraffe: 3 HK (hooks) Clear width: 2,700 mm Design: Head crossbar Maximum load per pair of crossbars: 3,000 kg, with evenly distributed load 02x Locking pins, used Design: Fully galvanized For securing the longitudinal beams against unintentional lifting out Note: 4-5 drill holes in the upper box profile Hfedpfx Asz Ayphecgel General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, input voltage: 400 V, overall weight: 121 kg, warranty duration: 6 months, temperature: 90 °C, Kärcher HDS 9/17-4C Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head featuring new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are buying the exact machine shown in the pictures. Technical Data: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 90 Connected load [kW]: 6.5 Fuel tank [l]: 25 Hose length [m]: 10 Weight [kg]: 121 EQUIPMENT: Hodez Ayn Depfx Acgefl NEW heavy-duty spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Water softener tank (for RM110) prevents corrosion and limescale buildup inside the heating coil and other lines.

Condition: ready for operation (used), functionality: fully functional, grinding length 500 mm grinding width 200 mm workpiece height 250 mm table surface 600 x 200 mm grinding wheel dimensions 225 x 20 x 51 mm grinding spindle drive 1.5 kW table feed 1 - 20 m/min total power requirement 2.6 kW machine weight approx. 2 t Hjdpfx Acjz Aynwjgjfl machine dimensions approx. 2.6 x 1.6 x 1.8 m

Condition: good (used), Used, hardly utilized Nederman exhaust extraction system for trucks and cars. Shipping not possible. Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Hfodjz Aymyjpfx Acgol Viewing and pickup only by prior telephone appointment. Subject to changes, prior sale, and errors.

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Hfjdpfxoz Aymae Acgsl Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors.

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors. Hfodpfsz Ayl Nex Acgjl

Condition: good (used), Hardly used Elektra-Beckum double bench grinder with stand and container, in good, fully functional condition. Hfedpsz Ayl Asfx Acgsl Shipping not possible Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only possible by prior telephone arrangement! Subject to change, interim sale, and errors.

Condition: good (used), functionality: fully functional, fuel type: gasoline, color: original, Used Wacker rammer BS60Y with original Wacker WM 80 AT engine and an additional, almost unused tamper shoe extension. The rammer is fully functional and ready for immediate use. Weight: approx. 63 kg Engine: Wacker 2-stroke Please do not send email inquiries! For questions, we are happy to assist you by phone. Hfsdpfxsz Aylvo Acgsl Inspection and collection only by prior telephone arrangement! Subject to change, prior sale, and errors.

Condition: new, Year of construction: 2026, The CORMAK TYTAN 210x520 conventional universal lathe + cutting tools is a professional metalworking lathe designed for precision machining of steel, aluminium and other engineering materials. Its compact design, solid machine bed and 6-speed gearbox ensure stable operation, high accuracy and a wide range of applications in workshops, toolrooms and small manufacturing facilities. CORMAK TYTAN 521 Universal Lathe – Precision Conventional Lathe for Professional Metalworking The CORMAK TYTAN 210x520 universal lathe has been designed for users who require a reliable machine for a wide range of turning operations. The machine's design allows both simple workshop operations and more demanding tasks related to one-off and small-batch production. Hfedpjz Ayk Sjfx Acgsl The 6-speed gearbox allows the operator to easily adjust the spindle speed to the type of material being machined and the operation being performed. Mechanical gear shifting ensures stable operation, high durability and efficient use of the motor's power during turning. Main Advantages of the Machine 6-speed spindle gearbox allowing the appropriate operating parameters to be selected. 750 W / 230 V motor providing stable drive during machining. Compact and rigid construction reducing vibration during turning. Precision bed guides ensuring dimensional accuracy of machined components. Ability to cut both metric and imperial threads. Spindle with an MT3 taper and 21 mm spindle bore. 4-way tool post enabling quick tool changes. Right-hand and left-hand rotation. Spindle guard and chip tray improving safety and working comfort. Standard Equipment steady rest and follow rest, Set of 5 turning tools 125 mm 3-jaw chuck, right- and left-hand jaws, gears for thread cutting, MT2 dead centre, grease gun, chip tray, chuck and tool post keys, open-ended and Allen keys, operating manual in Polish, CE Declaration of Conformity. Optional Equipment lathe stand, 4-jaw chuck, tool holders, live centres, turning tools, drill chucks for the tailstock. TECHNICAL SPECIFICATIONS Specification Value Swing over bed 210 mm Swing over cross slide 115 mm Distance between centres 520 mm Bed width 125 mm Headstock Spindle bore 21 mm Spindle nose taper MT3 Number of spindle speeds 6 Spindle speed range 140–1710 rpm Feed and Thread Cutting Number of metric threads 11 Metric thread range 0.4–3 mm Number of imperial threads 11 Imperial thread range 8–28 TPI Longitudinal feed range 0.05–0.2 mm/rev Cross Slide and Longitudinal Slide Tool post type 4-way Maximum tool post slide travel 70 mm Maximum cross slide travel 115 mm Maximum longitudinal slide travel 460 mm Tailstock Tailstock quill travel 45 mm Tailstock spindle taper MT2 Main Motor S1/S6 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Dimensions Length 1150 mm Width 580 mm Height 550 mm Weight 120 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,395 h, travel distance X-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details. Hjdpez Aykljfx Acgefl - Control Type: Heidenhain TNC 640 (NC Software: 340590 09 SP2)- Nominal Power: 60 kVA- Full Load Current: 80 A- Max. Load Current: 115 A- Short Circuit Resistance: 25 kA- Voltage: 400 V, 50 Hz (3-Phase)- Control On Hours: 24,470:15:33- Machine On Hours: 22,600:24:22- Program Run Hours: 14,169:52:59- Hydraulic Hours: 22,633:39:41- Axis Hours: 11,234:28:24- Spindle S1 Hours: 11,395:56:49- Additional Equipment: Chip conveyor, external cooling/chiller unit, handheld pendant control unit

Condition: excellent (used), Year of construction: 2021, operating hours: 5,646 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, plate length: 670 mm, plate height: 670 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KraussMaffei KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control System: MC6 Year of Manufacture: 2021 Operating Hours: 5646 h Technical Data - Clamping Unit Clamping Force: 800 kN Tie Bar Spacing h x v: 420 x 420 mm Platen Size h x v: 670 x 670 mm Minimum Mold Height: 250 mm Maximum Mold Height: 750 mm Opening Stroke: 500 mm Ejector Stroke: 150 mm Ejector Force: 43 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Technical Data - Injection Unit Screw Diameter: 40 mm Injection Volume: 201 cc Injection Pressure: 1860 bar Screw Length: 20 l/d Free Injection Flow Rate: 295 g/s Number of Heating Zones: 5 Dimensions & Weight Machine Dimensions L x W x H: 4.3 m x 1.6 m x 2 m Total Weight: 3900 kg Equipment 3 freely programmable inputs and outputs Screen text: German Screen text: Polish CEE socket 16A CEE socket 32A Increased ejector force Hydraulic core pull 1x Air valve 1x Hfedpfx Asz Ayi Uecgsl Machine with material hopper Machine with water manifold Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant BDE interface Interface for color dosing unit USB interface Schuko socket 10A

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Gruse, hydraulic scissor lift table trolley, scissor lift trolley, Hebefix type HF 2 C -Load capacity: 500 kg -Platform: 970 x 500 mm -Dimension when retracted: Height 360 mm -Extended dimension: Height 970 mm -Push bars: not included in the scope of delivery Hedsz Ayi Iopfx Acgsfl -Number: 2x scissor lift trucks available -Price: per piece -Transport dimensions: 1230/600/H360 mm -Weight: 100 kg/unit

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing Hfodpfxjz Ayizo Acgjl -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 517326E00044, Year of construction: 2014, load capacity: 2,500 kg, lifting height: 4,650 mm, free lift: 1,600 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, power: 36 kW (48.95 HP), motor manufacturer: VW, gearing type: automatic, empty load weight: 4,009 kg, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, trailer coupling, We would be happy to prepare a financing lease offer for you. Hedpfx Acoz Aymtjgefl Technically and visually in perfect condition. Road traffic equipment: upon request, we will carry out a new safety inspection (UVV), service, etc. Transportation can be arranged throughout Europe. No guarantee against errors.

Condition: good (used), functionality: fully functional, Spindle taper MK 2 Drilling capacity in steel 14 mm 2 speed ranges, steplessly adjustable, approx. 650 - 2000 rpm 1300 - 4000 rpm Hsdpfxez Ayihj Acgjfl Intermediate table, W x D approx. 280 x 250 mm Overhang: 200 mm

Year of construction: 2019, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CM, CMP, SCC 61/101 electric combi-steamers manufactured from 2011 up to the iCombi series (this hood is no longer compatible with the iCombi series). The hood has undergone an inspection in our in-house workshop and is fully functional. Hfsdpfxsz Ayibe Acgel Service: We will gladly assist you in finding a certified Rational customer service provider. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all appliance types. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Professional overhaul/inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: DT1UE19035033062 Year of manufacture: 2019 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Lambrechts Monobloc 80 Keg Filling Line Built in CIP for internal and external wash Hsdpfx Acoz Ayh Rjgofl Infeed Outfeed Conveyors

Condition: excellent (used), Year of construction: 2015, operating hours: 26,800 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Deckel Maho DMC 850V Machining Center Technical Data CNC Control: Siemens 840 Ergoline Travel in X-axis mm: 850 Travel in Y-axis mm: 520 Travel in Z-axis mm: 475 Feed rates m/min: 42 Max. Spindle speed rpm: 14,000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Infrared probe Tool measurement TT140 Internal coolant supply Flushing gun Direct XYZ measuring system Operating hours: 26,600 h Spindle operating hours: 11,000 h Base machine: Hfedpsz Ayhwofx Acgjl Dimensions/Weight L/W/H mm: 3,600 x 2,300 x 2,700 Weight kg: 5,750

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Hfjdpfx Acsz Ayhqsgol Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate locking

Condition: ready for operation (used), functionality: fully functional, Sawing machine Kaltenbach KKS-400M Hfedpfx Acsz Ayhdjgol saw blade diameter: 400 mm motor power: 1.8/2.7 kW sawing speed: 10/20 13/26 15/30 m/min feed rate: 0 - 1,000 mm/min rapid traverse forward/backward: 1,550 mm/min maximum working range: 130 mm working range for square material: 120 mm working range for flat material: 305 x 20 mm working range for round material: 130 mm minimum working range: 10 x 10 mm mitre range: 0° - 90° - 0° dimensions (L x W x H): 1,080 x 900 x 1,760 mm weight: 850 kg