TWI Hellas

Condition: like new (used), functionality: fully functional, machine/vehicle number: G1001366, Year of construction: 2020, operating hours: 3,956 h, input voltage: 220 V, Technical data: Dedpeyzzufsfx Ag Dokk Machine: 82.5 × 62 × 59 cm; 106 kg - Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi

Condition: used, functionality: fully functional, Fully operational printer. Model material licences for model materials type : ABS , PC, Ultem 9080 Dedoyzzmbepfx Ag Dskk

Condition: like new (used), Year of construction: 2022, part laser marking machine, as new Dksdeyzy Nzjpfx Ag Dsk

Condition: used, functionality: fully functional, machine/vehicle number: SG7A134003, Year of construction: 2019, operating hours: 20,000 h, For sale is a very well-maintained HP MJF 4210 system, consisting of the printer, processing station, and two build units. The upgrade from the 4200 to the 4210 model (worth over €100,000 from HP) provides significantly lower production costs thanks to substantially reduced HP consumables prices (powder, agents, printheads, etc.)! The machine operates very reliably and stably. It has been used exclusively for printing with PA12. Since commissioning, the system has always been covered under an active HP service contract. This means any faulty parts have been immediately replaced. The contract is still active and can be transferred to the new owner. All PMKs (Preventative Maintenance Kits) were carried out (proven) approximately one month ago. This means all moving components have been renewed. The machine is currently still in use and can be inspected and tested at any time (we are printing parts daily). Dodpfxoyzrqks Ag Dekk Collection must be organized by the buyer or through HP. The system is located at our Vienna site.

Condition: used, functionality: fully functional, Year of construction: 2019, type of input current: AC, input voltage: 240 V, input current: 13 A, input frequency: 60 Hz, We are offering this used 3D printer Stratasys Objet350 Connex3, year of manufacture 2019. Model: Objet350 Connex3 Serial Number: 370192 Year of Manufacture: 2019 Supply Voltage: 100–120 V Supply Voltage: 200–240 V Rated Current: 13.5 A Rated Current: 7 A Frequency: 50–60 Hz Djdpsyzq Nljfx Ag Djkk Number of Phases: 1 Short-term Peak Current: 1000 A If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2022, Component size: Dkjdpfx Aeyyxlljg Dek Length 1700 x Width 1050 x Height 1050 mm Printing process: The patented VFGF technology (Variable Fused Granulate Fabrication) is an advancement of pellet-based 3D printing with a variable nozzle opening. It prints in high resolution only where needed, such as on visible surfaces, and efficiently fills internal areas with thicker extrusions. In doing so, VFGF combines the advantages of FDM (Fused Deposition Modeling) for fine details and complex geometries with those of granulate printing (high deposition rates, material variety, reduced costs). Intelligent algorithms ensure the precise amount of material is placed exactly where it is required, even with complex shapes that involve overhangs or support structures. Areas of application: Suitable for prototypes, single parts, small series, and even higher production volumes. By melting the material in a specially developed screw extruder, high throughput rates are achieved, significantly reducing print times. This process is ideal for industries such as aerospace, mechanical engineering, and automotive manufacturing. Advantages: This technology enables the production of components with unrestricted design complexity and high surface quality. Compared to filament-based 3D printing, it offers significantly reduced print times and material costs. As a result, economical large-format 3D printing in manufacturing is now possible for the first time.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: -, Year of construction: 2021, operating hours: 3,394 h, The machine is fully functional, and in very good condition. All the accessories included - wrench for nozzle change, shims for bedlevelling, grease for nozzlechange. Included in the package some spares: 2 nozzles and tube replacement set. Drybox. Dedpfoyyak Aox Ag Dekk

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J35 Pro 3D printers are available immediately. Each machine undergoes a comprehensive inspection according to strict standards, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to a new machine. The machines differ in year of manufacture, equipment configuration, and operating hours. Detailed information on condition and price range is available upon request. The Stratasys J35 Pro is a compact industrial PolyJet multi-material 3D printer with a build area of 1,174 cm². The machine is suitable for realistic design and functional prototypes as well as highly detailed models and can process up to three materials simultaneously in a single print job. This allows you to combine different material properties—such as rigid, transparent, flexible, or impact-resistant areas—within a single component. Dksdpfx Asywvgzsg Dok With a layer thickness of 18.75 μm and high dimensional accuracy, the J35 Pro delivers precise, repeatable print results with extremely fine details and smooth surfaces.

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Included in the offer: Sinterit Multi PHS Sandblaster Accessories as shown in the photos Dkjdpfjywurvjx Ag Dok Vacuum cleaner not included

Condition: repair required (used), functionality: limited functionality, Year of construction: 2018, Hewlett Packard 4200 Multi Jet Fusion 3D Printer & Cleaning Station (Purchased July 2018) This unit is sold as a complete set along with Cleaning Station (2.2x1.2x1.5m), two Building Stations, two grey barrels and a pallet of inks. Djdpfjywb T Hsx Ag Djkk Operator monitor on the print unit is defective.

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 1,200 mm, total height: 1,550 mm, total width: 1,138 mm, overall weight: 350 kg, input voltage: 220 V, nozzle diameter: 3 mm, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, power: 5 kW (6.80 HP), space requirement length: 1,200 mm, space requirement height: 1,550 mm, space requirement width: 1,138 mm, Equipment: compressor, INONE3D FGF800 (WXF-FGF800) – Industrial Fully Enclosed FGF 3D Printer Dodpfx Aoyv Edaog Dekk The INONE3D FGF800 is a next-generation industrial 3D printer for 2025, developed for Fused Granulate Fabrication (FGF) and designed to provide cost-effective, large-format printing directly from plastic granules. This solution is ideal for manufacturing large prototypes, technical components, molds, and functional parts where reduced material costs and high productivity are key. The machine features a fully enclosed housing, which improves process reliability, increases operator safety, and ensures a more stable printing environment. With a generous 800 × 800 × 800 mm build volume, support for 1–5 mm plastic granules, and interchangeable nozzles (0.6–3.0 mm), the FGF800 is suitable for both high-speed, large-volume production as well as applications requiring higher detail. Technical Specifications: - Printing Technology: Fused Granulate Fabrication (FGF) - Model: WXF-FGF800 - Build Volume: 800 × 800 × 800 mm - Nozzle Diameter: 0.6–3.0 mm - Granule Size: 1–5 mm - Maximum Power Consumption: 5 kW - Power Supply: 220 V - Net Weight: 350 kg - Machine Dimensions: 1200 × 1138 × 1550 mm - Year of Manufacture: 2025 - Warranty: 12 months - Design: Fully enclosed industrial 3D printer - Availability: 2 units in stock

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – The Official Used Machinery Partner of Stratasys! Several professionally refurbished Stratasys Fortus 450mc 3D printers are immediately available. Each machine undergoes a comprehensive inspection according to strict standards, is thoroughly overhauled—focusing on all print-relevant components—and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new machinery. Dsdpfxjyvz Sms Ag Dskk The machines vary in year of manufacture, configuration, generation, and print hours. Detailed information regarding condition and pricing is available upon request. The Stratasys Fortus 450mc is an industrial FDM 3D printer featuring a build volume of 406 x 355 x 406 mm. This machine is suitable for functional prototypes, production tooling, end-use parts, and small-series applications. It excels with high dimensional accuracy, repeatable print results, and reliable performance in industrial environments. Thanks to its wide material compatibility—including high-performance and ESD materials—the Fortus 450mc can be flexibly deployed for various applications in manufacturing, aerospace, automotive, and general industry.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm Dkodpsyvhwijfx Ag Dok - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Dkjdpfxjyvhube Ag Dek Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, functionality: limited functionality, Year of construction: 2013, SLA IPro 8000 3D Printer Year 2013 Working but in need of a full service and someone who knows this kit. Pervious client paid £250k new! Comes with comsumbles resin. There are 2x machines (8000) available the other machine is Year 2017. Still in production Can be inspected in london. Dodpfx Aeyu Uxisg Djkk Contact me for more info

Condition: refurbished (used), functionality: fully functional, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys J850 3D printers are immediately available. Each machine undergoes comprehensive inspection in accordance with strict specifications, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to buying new equipment. The machines vary in year of manufacture, features, and operating hours. Detailed information regarding condition and pricing range is available upon request. Dksdpfx Agjyu Racj Djk The Stratasys J850 Prime is an industrial PolyJet full-color 3D printer with a build volume of 490 × 390 × 200 mm. This machine is ideal for realistic design and functional prototypes as well as demanding models, processing up to seven base resins simultaneously for multi-material parts in over 500,000 colors—including transparent and flexible areas. It is PANTONE-validated and offers layer thicknesses down to 14 µm (55 µm in super-high-speed mode) as well as high dimensional accuracy for consistent, repeatable print results.

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment • Material starter kit PA11 ESD BASF Machine Benefits Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator Dedpfxeyu Imme Ag Dokk • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) Dedpfx Agjyuyz Ns Dokk • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 294 mm, travel distance Y-axis: 192 mm, travel distance Z-axis: 149 mm, number of axes: 3, This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², allowing for versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality smooth surfaces and supports over 640,000 color combinations. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys J55 Prime machine we have for sale. Contact us for further details. • Technology: PolyJet (multi-material 3D printing) Dsdpfx Aoyub Hyeg Dskk • Build volume: Up to 22,000 cm2 (rotating build platform) • Max part size: Up to 1,174 cm2 • Layer thickness: 18 microns (0.0007 in) • Material capacity: 5 main material channels (ProJet technology) • Supported materials: VeroFamily (opaque colors); VeroClear / VeroUltraClear (transparent); Elastico (flexible); Digital ABS • Color capability: Over 640,000 combinations (PANTONE validated) • Accuracy: Typical deviation ±0.15 mm (±0.006 in) for rigid materials • Software: GrabCAD Print (compatible with SOLIDWORKS, CATIA, AutoCAD, etc.) Additional equipment • ProAero Air Extractor system (silent, odor-free operation)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components Dkedpfsyt Rk Ejx Ag Dok - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Dedpfx Asytg Rzog Dokk Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: refurbished (used), functionality: fully functional, total length: 2,772 mm, total height: 1,683 mm, total width: 2,027 mm, overall weight: 2,869 kg, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys F900 3D printers are available immediately. Each machine undergoes comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new equipment. Dkedpfx Agsytckqs Dsk The machines vary in year of manufacture, configuration, and operating hours. Detailed information regarding condition and price range is available upon request. The Stratasys F900 is an industrial large-format FDM 3D printer featuring a build volume of 914.4 x 609.6 x 914.4 mm. This machine is suitable for functional prototypes, end-use parts, and production tooling. It offers high precision, repeatable print results, and dependable production throughput. More than 25 materials can be processed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 134 h, We are offering this very well-maintained Formlabs Fuse 1 along with the Fuse Sift cleaning station, both with very few operating hours. The printer has demonstrably operated very reliably, as documented print jobs can verify. It has been regularly serviced and is in perfect technical condition. An on-site inspection under power as well as a test print are possible. The quality of the calibration prints speaks for itself. [See pictures] Shipping by freight carrier can be arranged upon request. Scope of delivery: - Fuse 1 - Fuse Sift - Delfin industrial vacuum for Formlabs Fuse Sift - Cleaning kit (brushes) - Formlabs Fuse Series Build Chamber 230V Djdpfx Agsyr Tdls Dokk - Fuse Series Powder Cartridge - Formlabs Fuse Series Printer Stand - 2x Formlabs Fuse 1 Optical Cassette - 8 kg recycled PA12 powder - 4 kg new PA12 powder If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Stratasys Objet 1000 (formerly J4100) The unit was overhauled in 2025, the laser was upgraded to the latest version, and the software was updated to the current release. Dksdpfxeyrtudj Ag Dsk Year of manufacture: 2013 Max. part dimensions: 1,000 x 800 x 500 mm Material: SUP705 (WaterJet removable) Overall dimensions: 2,200 x 1,960 x 2,102 mm Also prints clear glass, including transparent red and black, e.g. for automotive lighting. Consumables available upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2021, We offer this Stratasys Fortus 450mc 3D printer in excellent condition, year of manufacture 2021. If you have any questions or require further information, please do not hesitate to send us a message or call us. Dkedpfoym Dl Njx Ag Dok