Jan Ficek Dřevovýroba s.r.o.

Condition: ready for operation (used), Year of construction: 2004, This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Additional equipment • Light barrier safety device • Safety-oriented electric control • Swing-up protective gratings • Guide light as cut indicator • Telescreen positioning control • Fast table drive with swinging and drawing motion of knives • Simultaneous cuts of top and bottom knife • Automatic course of table, pressure bar, and knife movement • Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves Machine Benefits Technical Machine Benefits • Cutting length: 2810 mm • Insertion height: 80 mm • Cutting range: 20 - 470 mm • Drawing motion of knives: approximately 20° • Operating voltage: 400 v • Frequency: 50 cycles Extra Information Supplied with operating instructions Complete and ready for connection Ijdpfjyap Snex Ag Usht

Condition: used, functionality: fully functional, Arm reach: 630 mm Veneer thickness: 0.4 - 2 mm Feed speed: 7 m/min Voltage: 220 V, single-phase Ihodpfx Aox U Tggeg Uet Overall dimensions: 950 x 500 x 1180 mm (H) Weight: 95 kg

Condition: like new (used), gluing machine for thread with adhesive Ijdpfx Asx U Dhzeg Uoht zigzag stitching air-blown heating element pedal control 380V power supply

Condition: good (used), functionality: fully functional, Outreach 420 mm Feed rate 6 m/min Veneer thickness 0.4 - 2 mm Ihedpjx Uphtsfx Ag Uet Electrical connection 230 V Machine 'start' via foot switch Machine immediately available

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Ihedox Upgcopfx Ag Uet

Condition: used, Storage location: Supplier Isdpfx Aox Upfleg Usht

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm Isdpfx Agsx Nrmbe Uoht • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: good (used), Code: 0062 Ihjdex I Dwpjpfx Ag Ujt Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Ijdex Ihgnjpfx Ag Ujht Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Ihsdpfx Aoxtat Usg Ujt Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: good (used), Code: 0225 Brand: CASATI MACCHINE Model: Z 2000 - CE Standard Thread splicer for veneer - CE Standard Technical data: Reach mm 1200 Feed speed 10/40 mt/min Veneer thickness mm 0,3-3 Total electrical power Kw 1,5 Noise level DB 73,5 Compressed air 6 bar Overall dimensions mm 2050 x 600 x 1500 h Weight kg 450 Isdpoxmkkkofx Ag Usht

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Iedpfxsxgqmxj Ag Ujht Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Technical specifications: - Veneer strips must not show extreme tension or waviness. - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Isdsxd Apmspfx Ag Ueht Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). Isdpfexdxktox Ag Ujht NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Key features: * Durable PUR coating Ihodpoxdxh Esfx Ag Uot * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system Ihodpfxoxdxcps Ag Uot * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Isdpoxdxccjfx Ag Ujht Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Iedpfxsw Id S Ss Ag Ujht Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Ihjdpowrfbdofx Ag Uot Stand throat: 420 mm feed: approx. 6 m/min

Condition: like new (used), Binder with glue thread Zigzag stitching Heater with air blower Foot pedal control Ihjdpownff Iofx Ag Uet 380V power supply

Condition: excellent (used), Year of construction: 2006, I sell the veneer splicer Kuper FW-1200E. Ihjdjwg Ty Rjpfx Ag Uet Very good condition. Available immediately.

Condition: good (used), Year of construction: 1990, Kuper FW1150 veneer sewing machine, machine no. 30108291, built around 1990 Ihedpfev Rvpwox Ag Uot

Condition: used, Machine cleaned, function tested, Iedpsv Hhtyjfx Ag Uoht overhauled, adjusted, test run Various parts replaced: cover – discharge roller – pressure gauge – belt drive used, good condition Make: Kuper Type: FWJ 900 Mach. No. 17063317 Projection 900 mm Air heating mobile Space required approx. 1300 mm x 600 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Iedpfjvxvc Hjx Ag Uoht Year 2007. Very good condition. Available immediately.

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread Iedpfxovwf Dwo Ag Ueht heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee