PR Maskin AS

Year of construction: 2017, condition: ready for operation (used), A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Fjdpozk Nbcjfx Andjpi

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Fedpfx Anezklgbedepi

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Fsdpezkldyefx Andjpi

Condition: good (used), Year of construction: 1995, Offer 25346 Technical data: - Load capacity: 250 kg Fpodpfx Aozkhr Hondsi - Chuck jaw diameter: 250 mm - Motorized rotation, left and right - Rotation speed infinitely adjustable - Height from center of chuck: approx. 900 mm - Electric foot switch - 3-jaw chuck: 250 mm - Mobile base - Space requirement: approx. W 800 x H 1200 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system Fsdpfxjzkf Thj Andopi · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Fpedpfozka Imox Andji

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 Fpjdpfx Anszi Twrodji - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Fodpfxjzizpcj Andjpi Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Fpedjzikcfepfx Andoi Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Fpsdpfx Aezikb Uondsi Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Year of construction: 2026, condition: new, Technical specifications: Demonstration machine Pipe segment turning device for welding pipe bends in long pipeline sections Load capacity: 5 tons Pipe diameter: 150 – 920 mm Turning speed: 100 – 1000 mm/min. Frequency inverter: DANFOSS CE marking Fpedpfxozid Ris Andji Dimensions (length x width x height): approx. 1550 x 500 x 2580 mm Note: If required, a boom with a submerged arc welding head or for MIG welding processes can be added (at an extra cost). Warranty: 12 months The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Fpodpfx Anozhnucodoi

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Fsdpfx Anjzg Hvpsdspi Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Year of construction: 2020, condition: ready for operation (used), A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment. Fpjdpfszgwy Eex Andoi

Condition: excellent (used), Tucker Nimak MF180: Robotic welding tongs for single-sided resistance spot welding The robotic welding tongs for single-sided resistance spot welding from NIMAK utilize state-of-the-art medium-frequency transformers, a control system with adaptive welding current regulation, and finely adjustable welding cylinders for gentle power. Here, the right amount of force is crucial to reliably join materials without deforming them or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley Punch Riveting Tool, C-Frame With the Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel, and high-strength steel, by combining two technologies in a modular system: punch riveting with semi-hollow rivets and solid punch rivets. AEG SVS Welding Technology Electrode Grinding Device EF310-01E-S-D-Fix Grinding of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers, and communicates in an Industry 4.0 environment. Fpedpfx Ajzgcm Rjndsi The lung – small, quiet, and fast rivet feed for your SPR tool. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm Fjdjzf A Ifspfx Andepi • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Fjdpfx Anozfaarsdjpi

Condition: excellent (used), Here, we offer you a Ytterbium fiber laser. The LSS5 M laser welding tongs complement the product series as a compact welding tool. With laser powers ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser tongs Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Fpjdpfxjzd Rins Andsi Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding tongs LSS-5M-3500-3F Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Year of construction: 2014, condition: ready for operation (used), laser power: 260,000 W, Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details. • Current application: TIG welding / tack welding • Original application: Laser system (currently disabled) • Tube diameter capacity: 219 – 1,500 mm • Tube thickness capacity: 3 – 12 mm • Tube length capacity: 3,000 – 13,000 mm • Working system: 8 pushers (4 lateral + 4 upper) • Torch: TIG torch on front head • TIG wire diameter: 1.2 mm • Shielding gas: Argon • Machine control: External workstation with cycle start • Laser status: Laser element disabled in the current configuration Additional equipment Fpsdpfx Aozdz Nxendji • Former laser equipment available in stock: laser generator and extractor (can be included in the sale)

Condition: excellent (used), Ytterbium Fiber Laser Fjdpfx Aszdrw Hondopi Type: YLR-2400 S2-WW Description: Laser module (fiber laser IPG YLR-2400 S2-WW with cooling) Year of manufacture: 2017 Serial number: 7121450 Laser source 2.4 kW Laser structuring system, cooling unit KKW; without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrd External dimensions: Width 1250mm, Height 1580, Depth 720m Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Fedpfx Ajzdrwgjndjpi Output for measured values of laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20-01-37-00 400 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 400 V ± 10 %, 3P + PE, 60 Hz Scope of supply: (Laser system, laser head and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. Fjdpfszc Rl Uex Andjpi POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Fpsdpfx Ajzc Rc Tjndoi

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Fodpfx Ajzcf T Tendepi Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Fsdpfszbvn Eox Andjpi Technical data and specifications are subject to change without notice. Prior sale is reserved.