Automatics & Machinery

Condition: good (used), Year of construction: 2008, Ref. -No.: 10613 Manufacturer: GILDEMEISTER Type: GM 20 Year of construction: 2008 Type of control: NC Control: Gildemeister Storage location: Halberstadt/Hamburg Country of origin: Germany Further information: Machine type: GM 20-6 Number of spindles: 6 Number of cross slides: 6 (4) Number of tool spindles: 6 Bljdpfx Asx A Saljbbjr Max. bar diameter for round material: 20 mm (25 mm spec.) Max. across flats for hexagonal material: 17 mm (21 mm spec.) Max. across flats for square material: 14 mm (17 mm spec.) Max. bar feed in one working station: 100 mm (125 mm spec.) Max. bar feed in two working stations: 180 mm Max. bar feed in one station for double-cycle operation: 100 mm (125 mm spec.) Max. stroke of radial slides: 42 mm Radial slide adjustment forward/backward: ±8 mm Max. stroke of axial slides: 50 mm Axial slide adjustment forward/backward: ±8 mm Max. stroke of tool spindles: 86 mm Tool spindle adjustment forward/backward: ±11 mm Max. stroke of guide block: 50 mm Axial adjustment of guide block: 160 mm Max. thread (right-hand): 20×1.5 mm Max. thread (left-hand): 14×1.5 mm Speed of main spindles: 450–5000 rpm Cycle time (min.–max.): 1.4–60 s Rapid rotation per cycle (idle time per cycle): 150° passive degrees Base machine rotation (standard without spindle stop): 0.7 s (0.5 or 0.9 s spec.) Base machine rotation with loading device: 0.7 s Rotation with spindle stop and loading magazine: 0.7 s Number of tool positions: 12 Coolant tank capacity: 600 liters Nominal power of spindle drive motor: 11 kW Speed of spindle motor: 750–3500 rpm Dimensions (L×W×H) without bar guide: 3700×1500×1890 mm Dimensions (L×W×H) with bar guide: 5800×1500×1890 mm Net weight of machine without bar guide: 5260 kg Gross weight of machine without bar guide: 5860 kg Net weight of machine with bar guide: 5700 kg Gross weight of machine with bar guide: 6300 kg Machines can be inspected under power.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t Bljdpfx Ajx A R Sgsbbjr

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120,000 h, General Data Machine weight 6000 kg Blsdpfxex A I Dge Abbsr Control Unit Brand FANUC Model 21i Main Drive Number of axis 2 This Takisawa TT-200 BMC multi-spindle turning machine was manufactured in 2001. It features a twin-spindle (X + Z) horizontal CNC lathe configuration with a gantry forklift. Weighing approximately 6000 kg, it has both spindles operational, though the tool turret on the right side is broken. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2021, INDEX C200, Mfd. 2021 Bjdpfxox Av Dbe Abbolr Control: Siemens Solution Line 3 Turrets 2 Spindles D=90 mm IRCO VDI 30 With tooling prictured Short magazine bar Feed Machine located in Europe

Condition: used, Cnc multispindle lathe INDEX MS42C Bedpfoxzu Trox Abbslr

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor No. 2 polygon milling/thread milling devices No. 1 broaching unit No. 1 threading unit No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder Bodpfx Aoxyghfobbjlr No. 1 bar elevator Tool holders

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC lathe for precision ring manufacturing. Ideal for jewelry makers who demand high accuracy and repeatability. Supports various precious metals and offers easy integration with your existing workflow. ✅ Mirror finishing with diamond tools ✅ High precision ✅ Easy to program Blodoxybb Topfx Abber Built in 2010, delivered on 20/06/2013

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed Blsdpjxxm Hfjfx Abber

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17KX216770001, Technical Specifications: Work Area - Maximum turning diameter: 230 mm (120 mm with loader) - Maximum machining diameter: 200 mm - Maximum workpiece length: 145 mm (75 mm with loader) - X1/X2-axis travel: 130 mm / Rapid traverse in X: 24 m/min - Z1/Z2-axis travel: 145 mm / Rapid traverse in Z: 24 m/min - Y1/Y2-axis travel: ±40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis travel: X - Left 200 mm / Right 1600 mm; Y - 550 mm; Z - 155 mm; α 180˚ - Maximum feed rates (m/min): X - 160; Y - 120; Z - 35; α 180˚/1 sec - Load/unload gripper specs (pneumatic): Outer diameter Ø90 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Blsdpfxsxxi Ncj Abbjr Main Spindle - Spindle size: Standard (6" / 8") / 165 mm / 205 mm - Maximum speed: Left & right 45–4500 rpm - Motor power (100% duty cycle): Left 15 kW / Right 7.5 kW Turret with Driven Tools - Tool interface: BMT55 - Number of stations: 12 (right), 12 (left) – turret with driven positions - Maximum speed: 4000 rpm; milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 200V, 3-phase, fuse 151 A - Total connected load: 31 kVA Dimensions - Machine dimensions (L×W×H): 3950 × 2715 × 2800 mm - Weight: 4,400 kg Main Features and Capabilities - Horizontal design for optimized chip evacuation; gantry loading/unloading from conveyors - Automation: Gantry robot with two loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip conveyor - Coolant filtration: Up to 40 bar, micron filter (Evotech 500PRO) - Coolant chiller: Texa TCW55PMSBCDX00, SN165373 - Process control: Marposs T25 - Broken tool detection: Peek tool menu (Murata/Fanuc option enabled) - Documentation: Electronic/manual available Machine status: IN OPERATION

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of spindles: 6, bar diameter (max.): 22 mm, power: 63 kW (85.66 HP), Equipment: rotational speed infinitely variable, 6 spindles up to Ø 22 mm Single-NCU Synchronization device at station 6.1 Backside machining at station 6.2 IEMCA MS 22 - bar feeder CO2 extinguishing system Bsdpfexw Swaex Abbelr Hinged belt conveyor

Condition: good (used), Year of construction: 2007, functionality: fully functional, feed length Z-axis: 100 mm, number of spindles: 6, spindle speed (max.): 6,300 rpm, bar diameter (max.): 32 mm, total width: 1,716 mm, total length: 3,313 mm, total height: 3,015 mm, turning length: 100 mm, turning diameter: 32 mm, power: 80 kW (108.77 HP), travel distance X-axis: 68 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 100 mm, rapid traverse Z-axis: 12 m/min, Equipment: rotational speed infinitely variable, 6 spindles Double NCU five spindles already replaced stroke extender Artis tool breakage control high pressure Kraft & Bauer fire extinguisher Knoll VRF 500 Bledpjxwun Isfx Abber Pietro Cucchi - bar feeder various accessories

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 41015, Technical Characteristics: Work Area • Chuck diameter: 210 mm • Maximum workpiece diameter/height: 200/200 mm • X1/X2 axis stroke (working stroke): 160 mm / Rapid traverse in X: 24 m/min • Z1/Z2 axis stroke: 250 mm / Rapid traverse in Z: 30 m/min Bjdpfx Absxwmcwjbelr Main Spindle • Spindle configuration: 4 spindles (twin machining + twin loading) / A2-6 size • Distance between spindles: 282.5 mm • Maximum speed: 4500 rpm • Power: 18.5 kW Turret with Driven Tools • Turret configuration: 2 turrets • Number of positions: 2 x 10 • Maximum speed: 4000 rpm / Power: 3.7 kW Electrical Equipment • Operating voltage: 400 - 480 V, 120 A • Connected load: 66 kVA Dimensions • Total dimensions: Length = 3336 mm (with chip conveyor), Width = 2400 mm, Height = 1760 mm • Weight: 7000 kg Main Features and Capabilities: • CNC Control: FANUC 0i-TF Plus • Main spindle: High power and wide speed range • Driven tools: Capability for milling and drilling operations • Chip conveyor • Fully enclosed work area • Chip extractor • Cooling system for electrical panel • Lubrication system • Hydraulic oil cooling unit • Automation interface for robot integration installed • Documentation: Available in electronic and printed formats Machine Condition: • Status: Operational

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, number of spindles: 6, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 8-spindle Double NCU Slide unit 1.1: X-axis and Z-axis NC-controlled Slide unit 1.2: X-axis and Z-axis NC-controlled Slide unit 2.1: X-axis and Z-axis NC-controlled Slide unit 2.2: X-axis and Z-axis NC-controlled Slide unit 3.1: X-axis and Z-axis NC-controlled Slide unit 3.2: X-axis and Z-axis NC-controlled Slide unit 4.1: X-axis and Z-axis NC-controlled Slide unit 4.2: X-axis and Z-axis NC-controlled Slide unit 5.1: X-axis and Z-axis NC-controlled Slide unit 5.2: X-axis and Z-axis NC-controlled Slide unit 6.1: X-axis and Z-axis NC-controlled Slide unit 6.2: X-axis and Z-axis NC-controlled Slide unit 7.1: X-axis and Z-axis NC-controlled Slide unit 7.2: Swivel axis and Z-axis NC-controlled Slide unit 7.3: X-axis NC-controlled, Z-axis fixed Slide unit 8.1: Swivel axis and Z-axis NC-controlled Blsdpfx Aoxur Srebber Slide unit 8.2: X-axis and Z-axis NC-controlled Slide unit 8.3: X-axis NC-controlled, Z-axis fixed Synchronization device at position 7.2 Synchronization device at position 8.1 Rear-side machining at positions 7.3 and 8.3 possible with three fixed and two driven positions Index loading magazine MBL228/3300 bundle loader Hinged belt chip conveyor Three-jaw chuck Röhm for synchron spindle Workpiece conveyor belt at spindle position 7 Workpiece conveyor belt at spindle position 8 Fire extinguishing system Büchel coolant emulsion extraction system

Condition: used, Cnc multispindle lathe INDEX MS32C Bsdpfoxt U Hpjx Abbolr

Condition: ready for operation (used), Year of construction: 2005, operating hours: 63,071 h, functionality: fully functional, machine/vehicle number: 264-0002, Tornos Multideco 32/6i with C-axis Year of manufacture: 2005 Operating hours: 63,071 4m bar loader including guide channel Knoll unit with VRF 500 filtration Chip conveyor Bjdoxr Tyxspfx Abbolr Coolant wash tank Repairs carried out in the last 12 months: Clutches of spindles 2, 3, 4, 5 replaced Pick-off spindle newly mounted Spindles measured – all in order Fanuc module replaced The machine is still under power and can be handed over immediately

Condition: used, Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 49C6696, number of spindles: 8, bar passage: 42 mm, Currently, 2 spindles are deactivated on the machine as they no longer meet our quality requirements. Otherwise, the machine is fully operational and is still integrated into the production process. Bljdsxr Ab Eepfx Abbsr If you are interested, please feel free to contact us. An inspection can be arranged at short notice. Additional pictures can be provided upon request.

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Bledpfexqm Tvox Abber

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 SPINDLES - Max. bar diameter : 40 [mm] - Spindle speeds : 7000 [rpm] - Spindle power : 13/24 [kW] NUMERICAL AXES - Slide unit 1.1 : X and Z axes controlled by NC - Slide unit 1.2 : X and Z axes controlled by NC - Slide unit 2.1 : X and Z axes controlled by NC - Slide unit 2.2 : X and Z axes controlled by NC - Slide unit 3.1 : X and Z axes controlled by NC - Slide unit 3.2 : X and Z axes controlled by NC - Slide unit 4.1 : X and Z axes controlled by NC - Slide unit 4.2 : X and Z axes controlled by NC - Slide unit 5.1 : X and Z axes controlled by NC - Slide unit 5.2 : X and Z axes controlled by NC - Slide unit 6.1 : Z axis controlled by NC - Slide unit 6.2 : X and Z axes controlled by NC POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 77 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3329 x 2032 [mm] - Machine height : 2654 [mm] - Machine weight : 7100 [kg] MACHINE HOURS - Number of working hours : 47580 [h] EQUIPMENT - CNC : Siemens 840D (Powerline) Bodpfx Aexqhtksbbelr - Double NCU - 2 NC control panels - Cutting force monitoring: ARTIS - Chips conveyor - Coolant tank * with high-pressure pump : 80 [bars] - Bar loader : Index MBL 40-6 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Cnc multispindle lathe INDEX MS42C Blodpfx Aexpi Iaebber

Condition: used, Year of construction: 1985, functionality: unexamined, machine/vehicle number: 16/3, bar passage: 26 mm, Offered is a used SF26. Accessories: electronic parting-off monitoring, pick-off spindle. Bsdpfxjxpfw Ro Abbslr

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 4500 kg Main Drive Spindle speed range 45–4500 Number of axis 4 Movement X-Axis Movement 130 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 145 mm Z-Axis Rapid Traverse 24 m/min Bodpfsxn Uzvox Abbolr This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. Blsdpfoxnrtcjx Abber 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Blsdpfx Asxnmxmsbbsr Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Bledpsxnmvfjfx Abbsr Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Bedpjxndgzjfx Abbslr Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6