Athanassopoulos Dim Industrial Machinery Trading Co

Condition: good (used), Year of construction: 2008, used horizontal panel saw Manufacturer: Holzma Model: Optimat HPP350/43/43 Year of manufacture: 2008 Cutting length: 4300 mm Cutting width (programmed pusher travel): 4300 mm Roller track (10-track element): 1 unit Roller track (2-track element): 5 units Clamping grippers: 6 units, of which the first 3 have double fingers Air cushion table with roller elements: 4 units, each 2160 x 650 mm; of these, position 2 is movable/with drive unit Central blower: 1 unit with increased blower output Technical data: Saw blade projection: 80 mm Saw carriage feed: forward 90 m/min (EU limited to 25 m/min), reverse constant 90 m/min Automatic cutting height adjustment; pressure beam height control Angle alignment device, min. pushing width 0 mm; max. pushing width equals full cutting length Main saw motor 13.5 kW with pneumatic saw lift Scoring saw motor 2.2 kW, motorized saw lift, electric adjustment SCORING SAW UNIT (VVSH), TYPE 250/350/380 For splinter-free pre-scoring of soft and postformed panels as well as workpieces with edge-banding. Dkodjyzylcopfx Ag Djk Program-controlled vertical rise from below in through-feed. Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 20 kW Power Control CADmatic 4 control system; DATA TRANSFER ONLINE + USB PORT 19-INCH TFT FLAT DISPLAY WITH TOUCH FUNCTION 4 PNEUMATIC SQUARING FENCES ANGLE CUTTING DEVICE (MANUAL + Automatic); ANGLE CUTTING MASK CADMATIC Grooving program automatic incl. turbo-grooving CUT-OUT / STRESS-RELIEF CUTTING PROGRAM LABELING WITH PART GRAPHICS; labeling program and label printer Pica 104 DOCUMENTATION AND CONTROL TEXTS: GERMAN

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels angle cutting unit main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm Dkodpfx Ajyyzpaeg Dsk saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 operating hours: 5800

Condition: excellent (used), Year of construction: 2007, I sell the panel beam saw HOLZMA HPL380/38/38. Year 2007. Cutting size 3800x2200mm + back loading table. Cutting height 90mm. Max saw blade diameters 380 + 200mm Dkedpfxjyybi Tj Ag Dok Total area covered W.5924mm x D.9963mm 8 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. Cadmatic 4.1 optimising software included. Very good condition. Available immediately.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking Dksdpeyxn Adsfx Ag Djk The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711

Condition: refurbished (used), Striebig Automat III TRK 5220 AV + Max. cutting dimensions: 4300 x 2200 x 80 mm + Retractable rear wall + Central support shelf + Braked support rollers + 5.5 kW motor with 2 speeds + Feed continuously adjustable in horizontal and vertical directions from 10 – 25 m/min + Completely overhauled + All defective parts replaced Dodsyw Swvepfx Ag Dokk + New wooden rear wall + All bearings replaced + Wall-mounted or free-standing installation All missing add-on parts shown in the pictures (such as hoses, side panels) are, of course, included. Delivery/installation in Germany, Austria, and Switzerland possible. Other models available on request.

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Net weight approx. 6000 kg Availability: by arrangement Storage location: Rhineland-Palatinate Dedeyt Tkuspfx Ag Dekk

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 11,900 h, Cutting dimensions: 4300x4300 mm Blade diameter: 350 mm Label printer Total power: 20.9 kW Maximum cutting speed – 130 m/min, steplessly adjustable Maximum pusher speed – 90 m/min Maximum cutting height – 80 mm Four air tables Dksdpfoytt H Aex Ag Dok Automatic scorer adjustment Year of manufacture – 2014 Operating hours – 11,900

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Dedpfx Agsyttqzs Djkk Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Djdpfxeytfxwj Ag Djkk Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used BIESSE Selco WN2 saw - OSI control - label printer - Year 2017 - available April - saw height 60 mm - 1–80 m/min - quick-change saw blade Dedpfjyrr U Nox Ag Djkk - 4 air cushion tables

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Djdpfx Aeyqydcog Djkk Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade Ø 320 mm Scoring blade Ø 200 mm (conical tooth) OSI control system Label printer Label printer holder on the console Dkodpeypbidefx Ag Dsk Cycle start button via remote control Available July 2026

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Dedpfx Asymx S Deg Djkk Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: used, Year of construction: 1996, functionality: fully functional, Used stacker crane by GIS, designed for loading panel saws from a cantilever rack warehouse. The suction head can be swivelled 90°, allowing panels to be placed onto a vertical panel saw as well. This enables the saw to be loaded by a single operator without physical effort. Load capacity: 2 x 250 kg Crane runway profile: GIS 1000 Crane runway length: 24.7 m Crane girder profile: GIS 1500 reinforced Span: 6.45 m Crane girder length: 6.95 m Crane travel speed: 20/5 m/min Clearance height: from 4 m Dkodpfjympxbex Ag Djk The stacker crane is completely dismantled and stored at our facility. The attached video is from GIS, showing the successor model, which is still available today.

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. Machine details to follow… Location: Friedeburg area Dodpfxeylp S Es Ag Dokk Dismantling and delivery available at extra cost.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting dimensions 4300x4300 mm Cutting height 95 mm Beam feed with grippers 90 m/min Dodpfx Agoylbdts Djkk Cutting speed up to 150 m/min, steplessly adjustable Main motor power 13.5 kW Scoring saw motor power 2.2 kW Saw blade diameter 350 mm 4 air tables Extraction requirement 3800 m³/h Overall dimensions 6500x7700 mm

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Dkedpjyla I Rjfx Ag Dsk Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: Standard 3 TRK 6220A Year of manufacture: 1994 Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Power: 4.4 kW Speed: 4,750 rpm Two small notches in the rear area of the saw blade shaft. Dksdpfoyiazvex Ag Dsk Lower guide for the saw blade guard is missing.

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Dkjdpfxoyhnmgo Ag Djk Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Djdpfx Ajyhhx Aog Djkk Ideal for series production as well as flexible custom manufacturing.

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment Dedpjygw Auofx Ag Dokk • Label printer

Condition: used, Year of construction: 2017, machine/vehicle number: 1000021515, functionality: fully functional, power: 21.5 kW (29.23 HP), overall weight: 330 kg, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat în prezentul anunț Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Dkedpfxjyfgxpe Ag Dok Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, We offer for sale a very well-preserved HOLZ-HER 6210 cutting center. The machine has been inspected, regularly serviced, and is in very good technical condition. Equipped with a new PC running Windows 11 and the latest HOLZ-HER software. 🔧 Key Parameters: • Cutting work dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm • Main motor: 11 kW • Scoring motor: 2.2 kW Dkodpfsydn Rqex Ag Dek • Manual mode, EasyPlan, cutting optimization ⚙️ Construction: • Robust frame and precise guidance • Stable and accurate operation even with larger formats

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Dedpfoyc Sggjx Ag Dekk Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Used Panel Dividing Saw MAYER PS 2 Z - Year of manufacture: 2008 Dodpfx Asx Tcymog Djkk - Processing dimensions: 4300 x 2200 mm - Immediately available - Rear lifting table with powered heavy-duty rollers - Electronic pusher unit - All roller conveyors and air cushion tables included - Ideal for bundle cutting