TBI Technology Sp. z o.o.

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Kwodpfx Aajywhbkeljw Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Spindle Speed 4.000 U/min. table surface area 800 x 425 mm tool taper SK 40 Kjdpfsyv N Hfox Aalsww feed 2.000 mm/min total power requirement 5 kW machine weight ab. 2.000 kg

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Kwodpfx Aaoyv H Nkjljw Technical Specification Taper Size ISO 30

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm Ksdpfx Aasyv Eqmeleww y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Kedpeyvzftefx Aaljww Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: CNC Travelling Column Machining Centre Hedelius Type CB 80 – 2300 Year of manufacture 2003 CNC control Heidenhain iTNC 530 Very low spindle hours: 11,500 h Table 2900 x 750 mm Travel X/Y/Z 2300 / 800 / 600 mm Table load capacity 2800 kg Distance spindle – table 10 – 740 mm Spindle SK 40 Kwedpfx Ajyvzdijalew Tool magazine with 30 positions Spindle speeds 30 – 8,000 rpm Feed rates 0 – 3,000 mm/min on all axes Drive power 25 kW Weight 13 tonnes Price: EUR 19,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC vertical machining center Hedelius Type BC 40 D/20 Year of manufacture: 1997 Control: Siemens Sinumerik 840 D 4th axis Table: 2 x 1100 x 420 mm Kodpfx Aoyvzdcoaloww Pendulum machining possible Table load: 500 kg Travel (X/Y/Z): 1700/400/400 mm SK 40 Magazine for 20 tools Spindle speeds: 30 – 6000 rpm Rapid traverse in all axes: 30 m/min Drive power: 20 kW Weight: 7 t Price: EUR 12,500.— plus VAT ex location

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination Kjdsyvvluepfx Aaloww STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK 50 Kwjdpfxjyvudve Aalew Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Main drive: 60 kW Machine weight: approx. 24 t

Condition: good (used), Year of construction: 2016, Posmill 2050, year of manufacture 2016, Heidenhain control, X/Y/Z travel 2050/1050/780 mm, 60-tool changer, spindle speed up to 12,000 rpm, HSK 63 tool holder, 3D infrared measuring probe MH, Blum laser tool measurement. Kwedpfx Asyvqczoaljw

Condition: used, x-travel / mm y-travel / mm z-travel / mm Kwjdpfx Aasyvkwljlow

Condition: defective spare-parts repository (used), Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 2,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 2,700 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810, total height: 2,800 mm, total length: 4,450 mm, total width: 2,850 mm, table width: 520 mm, table length: 1,200 mm, rotational speed (max.): 10,500 rpm, overall weight: 12,100 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 36,000 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, We are offering this used Chiron FZ 28 L vertical machining center, year of manufacture 1996. Model: FZ 28 L Serial number: 137-28 Year of manufacture: 1996 Weight: 12,100 kg Number of driven axes: 3 X-axis: 2800 mm Y-axis: 520 mm Z-axis: 630 mm Table clamping surface: 1200 x 520 mm (two machine tables installed) Spindle speed: 0 - 10,500 rpm Power output: 36 kW Tool holder: SK50 Tool changer for 40 tools Automatic tool changer Feed / Rapid traverse: X 40 m/min - Y/Z 30 m/min Coolant system: available Chip conveyor: available Hydraulic clamping system: available Note: The machine has a technical defect on the Z-axis (further information on request). The machine is being sold in its current condition. Dismantling, collection and loading are to be carried out by the buyer. Kwjdpfxjyvg Aks Aalow If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of manufacture: 2008 Travel distances: X-axis: 1,800 mm Y-axis: 510 mm Z-axis: 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 mm Spindle mount: SK 40 Tool magazine: 20 positions Celox spindle speed: 50 – 12,000 rpm Kodpsyvgxxofx Aaloww Equipment - 3D Formingstar package - 3D Heidenhain measuring probe - Chip conveyor - Partition wall - LTA extraction system - Water tank with high-pressure pump 20 bar - Machine enclosure

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Kwsdpfsyuzg Hjx Aalow Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2001, travel distance X-axis: 2,100 mm, CNC controller: HEIDENHAIN TNC430 Axes X-axis travel mm: 2100 Y-axis travel mm: 720 Z-axis travel mm: 600 Worktable Table dimensions mm: 2800x650 Ksdpfeyuu R Sex Aaleww Max. workpiece weight kg: 2500 Spindle Spindle speed rpm: 30 - 8.000 Spindle drive power kW: 16,25 Spindle torque Nm: 102 Tool system Tool holder: SK40 Tool magazine slots: 30

Condition: excellent (used), Year of construction: 2013, operating hours: 10,370 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: 530, coolant supply: 20 bar, Matec 5 axes Rotary table, speed 8 rpm Kedpjyuuz Rjfx Aaljww

Condition: used, Year of construction: 2001, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 850 mm, DAEWOO ACE V - 850 MACHINING CENTER CNC FANUC 18 - M TABLE SIZE: 2,000 mm x 800 mm Kwodpoyup T Uofx Aalsw TRAVEL: X: 2,000 mm Y: 820 mm Z: 850 mm DISTANCE SPINDLE NOSE - TABLE SURFACE: 200 - 1,030 mm SPINDLE SPEED: 6,000 RPM MAXIMUM PERMISSIBLE TABLE LOAD: 3,000 kg TOOL MAGAZINE CAPACITY: 40 positions TAPER: ISO 50 DIN 69871 CHIP CONVEYOR MACHINE COMPLETE WITH ALL DOCUMENTATION YEAR OF FIRST INSTALLATION: 2001 MACHINE IS IN EXCELLENT CONDITION

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping Kjdpfx Aasyugupjleww - Machine hood with automatic roller blind - Machine doors with automatic drive and Rotoclear window - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,327 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HEDELIUS RS 60 K - 2000 was manufactured in 2005. It features a generous X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine can accommodate a maximum workpiece weight of 1000 kg on the fixed table. If you are looking to get high-quality machining capabilities, consider the HEDELIUS RS 60 K - 2000 vertical machining centre we have for sale. Contact us for further details. • Travels (fixed machine table area) X2/X/Z: 775 / 620 / 520 mm • Spindle nose-to-table distance: 100–620 mm • Max. workpiece weight: rotary/tilting table 300 kg; fixed table 1000 kg Kjdpfxsyudiwj Aaleww • Main spindle: Diebold MSG-E205.15-15AK4 • Axis drives (X/Y/Z): Siemens 1FT6082 // IMB 25 // 4.1 kW // 3,000 rpm // IP54 • Internal cooling: Yes, internal coolant system installed • Prepared for automatic clamping: Yes • Spindle run time: 10,327:19:09 • Condition: Used, not functional Additional equipment • Heidenhain HR410/3+ handheld control unit • 350-liter screen filter system with 20 bar internal coolant • Scraper floor conveyor (chip conveyor) • Partition wall for pendulum machining • 2x blow-off guns • Cleaning gun (3 bar, 20 l/min) • Touch probe preparation: Renishaw RMP60 receiver installed; touch probe itself is not included • Robot interface • Oil mist extraction • Machine hood • Laser for tool measurement • 30 places in the tool changer

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor Kjdpfsyt Ifyjx Aaloww • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of axes: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details. Kwedpoyt Hg Njfx Aaljw • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm • Spindle: • Type: High-speed milling spindle • Tool system: • Tool changer: Turret head • Tool positions: 8

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller manufacturer: FANUC, controller model: Series 31i, table width: 1,050 mm, table length: 4,100 mm, overall weight: 22,500 kg, spindle speed (max.): 3,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm. Machine Benefits Ksdpfx Aaeyttffoljww Qualitative Machine Benefits • Very good condition! Technical Machine Benefits • Spindle motor power 22/26kw

Condition: like new (used), Year of construction: 2018, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 1,100 mm, table length: 3,200 mm, number of slots in tool magazine: 60, DMG MORI DMF 260/11 LINEAR 5 AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC: Heidenhain iTNC 530 Table size: 3,200 x 1,100 mm Travel X / Y / Z: 2,600 x 1,100 x 900 mm Table load capacity: 4,000 kg Rotary table capacity: 1,200 kg Machine weight: 27,750 kg Taper: DIN 2080 A-50 (ISO 50) Tool magazine capacity: 60 positions Spindle speed: 10,000 rpm Blum tool probe Additional machine equipment and maintenance carried out - Internal and external air and coolant supply, through the spindle via M function (40/80 bar) - Upper external air cooling (evacuation for higher chip volume via M function) - Headstock vibration control module - Preventive maintenance up to date: oil changes, filters, coolant, performed as per manufacturer’s schedule or operational needs - Y-axis spindle replaced at 9,256 hours Kwodpfx Aoytrzxjaljw - Belleville washers replaced at 13,903 hours - Mechanical tool probe with option for Blum laser installation (laser included) - DMG probe - 3D QuickSET - Coolant gun - X-axis linear drive - Basic machine dimensions: Length: 8,600 mm; Width: 5,800 mm; Height: 3,200 mm - Chip conveyor

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Ksdpfx Aaoytruxjlsww Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, tool weight: 20,000 g, We offer a 2016 VTEC SF 2116 vertical machining center in very good condition. Kwedpfsytfh Sex Aalow