Maklo Handel en Verhuur

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Fedpfszz Rpcox Ag Iepl

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. Fpedpjzzxbtefx Ag Ijl The machine is available upon agreement. Further information is available upon request. Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: B05-991, We offer this ready for use Zahoransky V10 Zahoransky B05-991, year of construction not specified. Manufacturer: Zahoransky Model: V10 Condition: ready for use Category Id: 33 Type: Zahoransky B05-991 Fedpozzrpqofx Ag Iepl Vertical manual brush tufting machine, Zahoransky type V10 Stoke: 100mm Fillament length: 210mm unfolded, processing synthetic and natural filaments Fillament boxes: 1 color Tufting tool: 7.0 mm and 10.0 mm ( one tool set included ) Condition: ready to operate If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). Fjdpjzzp Ttjfx Ag Ispl The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Fpsdszzf D Iopfx Ag Iol

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Fpsdszy Ruiopfx Ag Isl Power: 30 kW (see photo for more technical details)

Year of construction: 2002, condition: used, functionality: limited functionality, Sand processing plant for the production of high-quality sand with a grain size of 0-2 mm. For sale is a complete sand processing plant from the Rheinstetten-Forchheim gravel and sand works of Heidelberg Materials Mineralik DE GmbH. The plant was used for cleaning sand, removing organic contaminants, and producing sand with defined quality characteristics. Key technical data: Fpsdpfx Agszx Uyto Iel Throughput capacity up to 200 t/h Processing of sand 0-2 mm Production of controlled sand 0-2 mm allflux® AFX-F 750 fluidized bed classifier Solid material throughput up to 200 t/h Mixture volume approx. 375 m³/h Machine weight approx. 8 t allflux® AFS-F 500 eddy current classifier Solid material throughput up to 60 t/h Grain size 0-0.25 mm Fine sand recovery with hydrocyclones 3 dewatering screens for fine, medium-fine, and coarse sand Reversible conveyor belts Silo system with 6 buffer silos, each with a capacity of 220 m³ Dosing system with 8 dosing belts and 8 electric discharge gates Scope of supply: allflux® AFX-F 750 fluidized bed classifier Fine sand recovery with hydrocyclones and arch screen allflux® AFS-F 500 eddy current classifier 3 dewatering screens Fine sand recovery for coarse sand Fine sand recovery for medium-fine sand Conveyor technology Silo system Dosing system

Year of construction: 2025, condition: like new (used), Cement silo + electric motors Volume = 80 tons of cement February 2025 Adjustable spout Inspection possible Fpodpozxca Uofx Ag Iel

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. Fpodezwmfropfx Ag Ijl It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: used, Digital color printer, Roland Versa UV LEF2-200 Location: Bad Tölz Fpjdpfx Ajzv Sncog Ijl Inspection is welcome. We have other used machines available. Please contact us.

Year of construction: 2020, condition: excellent (used), 2020 Coherent EasyJewel 5 Premium Desktop Class 1 Fibre Laser Marking and Engraving System With Rotary Axis The Coherent EasyJewel 5 Is A Premium Desktop Class 1 Fibre Laser Marking & Engraving System Designed Primarily For Jewellery, Watches, Medical Devices, Precision Engineering & Small Industrial Components. It Is Capable Of High-Resolution Engraving, Deep Engraving, Annealing, 2D Code Marking, Optional 3D Engraving Using Coherent's Laser Suite Software. Chamber Dimension W300 x D200 x H120mm. Marking Field Options Standard Lenses Include Fields Like 120 x 120mm, 180 x 180mm, or 240 x 240mm. Pulse Width 4 to 200ns. Pilot Lase: 660nm (Visible Red Guide). 'Z' Axis Travel 120mm. Voltage 230V. S/No. 40475422 (2020). With BOFA Extraction & Filtration Unit, Laptop With Software, EasyJewel Special Ring Holders, EasyJewel Chuck For Bangle/Bracelet Marking & EasyJewel Chuck For Irregular Shaped Rings. Overall Dimensions L770 x W540 x H750mm. Weight Approx. 87kg. Fpedpfszvpy Njx Ag Isl

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm Fpodpfjzvmh Rjx Ag Iel - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Horizontal mixer, manufactured by Ahlmer Length: 2950 mm, Width: 1350 mm, Height: 1525 mm Capacity: 5.2 m³, Usable volume: 4 m³ Chain drive Motor: 5.5 kW (frequency-controlled) Mixing paddles Discharge via screw conveyor (frequency-controlled) With weighing unit Fodjzvammepfx Ag Iepl Control cabinet Lid with hand winch Discharge slide

Year of construction: 2010, condition: used, functionality: fully functional, We are offering this used AWETA GS DV-D 14+1 sorting machine for cucumbers (or zucchini), manufactured in 2010. Machine type: GS DV-D 14+1 Serial number: 60795-01 Year of manufacture: 2010 Description: The system sorts approximately 18,000 cucumbers per hour. Optionally, automatic emptying of the crates, including the removal of the full crates, is also available. Not included in the sale: Palletizing and strapping machine. Fpodpfx Agozu H Uhe Ijl If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Fpedpfezt Sb Dex Ag Isl Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2010, condition: good (used), functionality: not functional, 4-Roll Rubber Calender, 14'' x 42'', L-type, for the production of inner linear and fabric coatings. It consists of a drive unit, TCUs, cooling rolls, and conveyor belts. Fpsdpfx Agezt Nkij Isl

Year of construction: 2012, condition: excellent (used), functionality: fully functional, controller model: Simatic Mobile Panel 277 10", number of cylinders: 4, lifting height: 1,500 mm, pressing force: 250 t, operating pressure: 245 bar, main lifting speed: 290 mm/min, pressing speed: 400 mm/s, control type: PLC-controlled, Equipment: 3rd hydraulic function, hydraulics, Here you have the unique opportunity to acquire a thermoforming press from the premium manufacturer FRIMO. The press is in used, very good condition, has no outstanding maintenance requirements, and is available immediately. Fedpfxeztm Ufo Ag Ispl The press can also be modified and adapted to meet new requirements according to customer specifications. Please feel free to contact us regarding your planned project, and we will prepare a customized offer for you. The press is currently located in Sontra (Germany) and can be inspected by arrangement. The press is currently partially disassembled (platform, hydraulics, attachments, etc.) and can be completely reassembled if required. The press was last used in a multi-stage production line; the other equipment is also largely still available. The image (overview) shows everything schematically; this advertisement primarily concerns the 250t thermoforming press. If we have piqued your interest, please do not hesitate to contact us at any time.

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used Fecken-Kirfel G1 band splitting machine, manufactured in 1986, for sale. Manufacturer: Fecken-Kirfel Machine type: G1 band splitting machine Model: G1 Year of manufacture: 1986 Condition: used Fsdpfxeztmybs Ag Iepl Length: 4,500 mm Width: 1,200 mm Height: 1,400 mm Working width: 800 mm Weight: approx. 3.5 t The machine is being sold due to the purchase of a new machine and is in working order. If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Fpjdpfxjzr T Dkj Ag Iol Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Year of construction: 2022, condition: used, functionality: unexamined, For sale is a package of six Cavitec system modules for processing web-shaped materials: two identical laminating/pressing calenders, two stationary winding stations, and two mobile winding stations. The modules come from a coating or laminating environment for technical textiles, nonwovens, films, or membranes. Position 1: 1 × Cavitec laminating unit / laminating calender Position 2: 1 × Cavitec delaminating unit / identical pressing calender Position 3–4: 2 × stationary Cavitec winding stations; suitability for use as unwinder or rewinder for technical materials to be determined Position 5: 1 × mobile unwinder Fodpfx Aozr Hh Neg Iopl Position 6: 1 × mobile rewinder Proof of origin: Purchase contract from 2022 with historical photo documentation available. Preferably sold as a complete package; partial sale by agreement. Sale basis: Used, as inspected; dismantling, loading, and transport by agreement. The system is located in 06502 Thale.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A Fodjzrvh Ejpfx Ag Ispl If you have any questions or need more information, please send us a message or call us.

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Air Purification System The system incinerates gaseous pollutants and odors from production exhaust air in order to release clean air into the environment. Extraction: Process air containing solvents or odors (e.g., from painting facilities, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to extremely high temperatures. Combustion (Oxidation): In the combustion chamber, the natural gas feed (the support burner) ignites the air. At temperatures of up to 850°C, organic pollutants (VOCs) decompose completely into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy recovery: The cleaned, hot air subsequently flows through a second ceramic bed, releasing its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as very little additional gas firing is required after the start-up phase. System specifications Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of manufacture: 2019 Serial number: 15212 Throughput volume: 2,000 Nm³/h Gas & Combustion Gas type / Calorific value: Natural gas H / 10.4 kWh/Nm³ Firing heat output range: 30 kW Flow pressure: 200 – 1,500 daPa Max. combustion chamber temperature: 850°C Electrical connections Mains connection: 400 / 230 V AC Connected load: 24 kVA Current draw: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Fedpfszrl Ibsx Ag Ispl Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. Fpedpfezrg I Asx Ag Isl These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total width: 4,600 mm, total length: 9,100 mm, total height: 3,000 mm, overall weight: 40,500 kg, Double-production solar panel laminating machine This laminator is used to produce solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under pressure and temperature. Fpjdpfxszrdhgj Ag Isl The lamination process is carried out under vacuum, preventing the inclusion of undesirable entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be viewed in operation.

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Fsdpfszq T Adex Ag Iopl Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.