Delta Robot ve Makine San.Tic.Ltd.Şti.

Condition: excellent (used), functionality: fully functional, Motorized decoiler Gbsdpfx Aoyi D Uijfnoh Capacity: 1,500 kg Length: 1000 mm Closed: 500 mm Complete with sheet metal measuring device Used Internal code: svr 383

Condition: used, Uncoiler, Sheet Metal Decoiler, Used machine Gedpfxjyc Spbs Afnsbh Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel Gbedpfoycnf Sjx Afnsh :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, total length: 3,300 mm, total width: 1,500 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Gbsdsyci Smopfx Afneh

Condition: excellent (used), functionality: fully functional, Decoiler, Reel/unwinding reel Internal coil diameter from 250 to 450 mm External coil diameter max. 1000 mm Gbjdpfxoycf Ahs Afnsh Width max. 200 mm With brake Good condition, ready for immediate use

Condition: used, Decoiler and straightener, sheet uncoiler, sheet straightener, coil unwinder, feeder, used machine Overall dimensions: Width: 2000 mm Depth: 900 mm Height: 1500 mm Weight: 636 kg Decoiler coil diameter range (min–max): 360–520 mm Electrical data: 400V Straightening width: 205 mm Roller diameter: approx. 35 mm Lower roller set: 4 pcs Upper roller set: 3 pcs Gbjdpfx Afsybazpjnsh

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Gbodpfx Afeyangkjnjh Year of manufacture: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: excellent (used), Year of construction: 2018, operating hours: 54,119 h, functionality: fully functional, machine/vehicle number: 14591-179, Make: Röders Model: RPX 400 Year: 2018 Serial no.: 14591-179 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E25 (ISO) • Max. tool diameter: Ø 4 mm Worktable: • Table size: 450 x 300 mm • T-slots: 12 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 330 mm • Max. workpiece weight: 100 kg Travels: • X-axis: 410 mm • Y-axis: 294 mm Gbedpfjyangdjx Afnjh • Z-axis: 210 mm Feed rates: • 0–60,000 mm/min Tool changer: • 18-position automatic tool changer Features / Equipment: • Ceramic bearings • Chip separator and chip conveyor • Includes Erowa ER-016841 UPC clamping chuck Hours: • Total hours (read): 54,119 h • Cutting/milling time: 29,529 h Weight: 3,200 kg Electrical: • 400 V • 32 A Overall dimensions: 2,515 x 1,930 x 2,080 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, Simple machine for longitudinal and cross cutting in the thickness range of 0.40 to 0.80 mm and width up to 1250 mm. Specification: - The machine is equipped with 6 pairs of knives and can be divided into 7 strips, with a minimum strip width of 60 mm (manual adjustment). Cutting length tolerance ≤±2.0 mm. Automatic control of quantity and cutting length. - Knife material: Cr12, precision processing, heat treated. - Power: 4 kW. Electrical standard: 380 V/50 Hz/3 PH - Control voltage: 24 V - Components include: PLC (Siemens), touch screen (Siemens), frequency inverter (Schneider), encoder (Omron), etc. Gbsdpfsx U Exhjx Afnoh - Option to add a mechanical or automatic decoiler.

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Gedpfsx Sw U Nsx Afnebh

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; Gbodpfxsx Nf R Ho Afnjh -Barely used; -We can arrange transportation to any European Union country at buyers costs;

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm Gbjdpfex Ifc Tsx Afnoh -Weight: 35 kg

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Gbedpfxjx Emdgj Afnsh Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: used, Year of construction: 1980, material width 200 mm coil weight 0,15 t coil internal dia. 200 - 550 mm speed 6 - 30 U/min Weight 0,2 t Dimensions (WxDxH) 0,9 x 0,9 x 1,3 m Gbsdpfjx Dnd Nox Afnjh

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, For sale is our GSW feed unit / roller feeder from our mechanical department in Hungary (Szügy). Type: WV 65 / 80 Year: 2004 (very good condition). The feed unit / roller feeder is still installed in the line and can be inspected and demonstrated on site in Szügy, Hungary at any time. We are happy to answer your questions regarding our equipment. Technical data available as a PDF below. Gbsdpfxexy E Uwo Afnoh

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Gbjdpfx Aexx R Utjfneh

Condition: good (used), Year of construction: 1990, Pallet decoiler, max. load 3,000 kg, power supply 380 V - 50 Hz, Gedpjxx R Ndjfx Afnebh

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm Gbodjxvitvopfx Afneh coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Conventional lathe Inv. no. 3506 Ayel-Tech Model BT 400 * Turning length: 1000 mm * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck * Emergency stop * Change gears * Chip guard/rear panel * Documentation Gbsdpsxp Idgsfx Afneh * 400V

Condition: used, functionality: fully functional, Year of construction: 1992, Ref. No.: Lg 35325 Single-sided decoiler PBK E 1200 Used, in good condition Godpfxjxn Tprs Afnjbh Year of manufacture: 1992 Technical data Load capacity approx.: max. 1,200 kg Strip width: max. 300 mm Expansion range: approx. 360 to 420 mm Outer coil diameter: approx. max. 1,500 mm Without drive, with pneumatic brake. Expansion of the supporting segments is manual via hand crank over joints. Number of supporting segments: 4 Coil side guide via heavy-duty limiting arms, can be clamped using quick-release fasteners. Uncoiler stand in robust box-type design as a welded structure.

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Gjdpfx Afoxd Rgyonsbh

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm Gbsdsxd Rgmopfx Afnsh - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm Godpfxexd Rgaj Afnsbh

Condition: used, Year of construction: 1984, Reel 150-1 - Mounting Ø 320mm - Ø 650mm Gbedjxb S Nwjpfx Afneh - Shipping possible at extra cost

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler ITEM I : 6-ton X1250MM hydraulic tensioning, power feeding, with pressure arm. Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Gbodow Nqi Hepfx Afnjh Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1250mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4KW, with a forming speed of 25M/min in conjunction with the main engine Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Customer provided gas source Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation Other terms 1. Voltage standard: 380V/50HZ/3Ph 2. Operation nameplate: English/Chinese 3. Paint color: Uncoiler body RAL5015 (blue) Oil cylinder: red; Uncoiling mechanism