BSS GmbH

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Industrial steam boiler system (2 units) Manufacturer: Viessmann Model: Vitomax 200 HS Year: 2005 Steam capacity: approx. 2,300 kg/h Operating pressure: 10 bar Burner: Manufacturer: Weishaupt Model: G8/1-D Power range: 400 – 2,275 kW Year: 2005 Used, in good working condition. Inspection possible upon request. - Boiler unit - Burner - Control panel - Accessories as shown in the pictures Podpfxjyxtdte Acvegi EUR 10,000 each Ex works (EXW), Belgium

Condition: new, Year of construction: 2022, functionality: fully functional, power: 510 kW (693.41 HP), INDUSTRIAL HOT WATER AIR HEATERS – COMPLETE LOT Sale of a complete lot of 70 industrial hot water air heaters, brand FläktGroup, model MultiMAXX HN41. Pgedpfoyxn A Dex Acvsi Brand new equipment, never used, year 2022. Power supply: 3×400 V – 50 Hz Electrical power: 510 W Protection rating: IP54 Hot water exchanger: 130 °C – 1.6 MPa Installation: ceiling or wall-mounted Applications: warehouses, industrial buildings, logistics, workshops. Homogeneous lot, stored in warehouse, immediately available. Sale only as a complete lot.

Condition: new, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 02241100104, power: 2.6 kW (3.54 HP), type of input current: AC, heating capacity: 372 kW (505.78 HP), fuel: liquid petroleum gas (LPG), Equipment: type plate available, Burners Brand: Riello Psdpfeyw Ubksx Acvsgi Model: RS130 Typ : 823 T1 Condition : New Serial Number :02241100104 Fuel : Natural gas Heat : TC Standard Heat Voltage : 3N/400/230V 50Hz Start Up : Direct Power : 2nd stage kW – 930-1512 Mchal/h – 800-1300 min.1st stage kW – 372 Mchal/h – 320

Condition: excellent (used), Novumax H2R 625 / 600 kW heating boiler Buderus/Viessmann Pgjdpfxjywzx Ae Acvei

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), Rediscovered during hall clearance. As-new KWB wood chip furnace, only operated for testing purposes. The furnace is still on the original pallet. Original documentation is available. According to the manufacturer, it can also be used as a pellet stove. Our chimney sweep confirms that the furnace can be put into operation without additional equipment and meets all requirements. Due to its age, we cannot provide any guarantee or warranty. Pgjdpfx Aoywfadocvji

Condition: used, Year of construction: 2012, heating capacity: 150 kW (203.94 HP), For sale is a mobile pellet heating unit in container design with a thermal output of 150 kW, as well as an additional pellet buffer container with a capacity of 11,000 liters. Container dimensions: 6 m x 2.5 m x 2.9 m The heating container was built in 2013 in compliance with legal regulations and is equipped with: - Fröling pellet boiler - Buffer storage tank - Flue gas pipes - Safety devices - Control cabinet / control system The mobile heating unit is overall in good condition, especially considering its extended period of inactivity. However, prior to recommissioning, a functional test of the system is recommended to identify any potential defects or maintenance needs. Pgedjytcxuspfx Acvsi If any repairs are required during recommissioning, this can be taken into account when negotiating the price. If you are interested or have further questions, please feel free to contact us.

Condition: excellent (used), Buderus heating boiler SK635 / 555 kW Psdpfx Acoyr Aidjvsgi

Condition: excellent (used), Year of construction: 2005, 1 used hot water boiler ----- - mounted on frame – Type: UT-L 14 Manufacturer: LOOS Output: 1,500 kW Permissible operating pressure: 6.0 bar Test pressure: 9.6 bar Permissible flow temperature: 110°C Water capacity approx.: 1,700 l Year of manufacture: 2005 CE mark: 0085 Equipped with Weishaupt combination burner, type GL8 / 1-D, Oil output 65–191 kg/h, gas output 400–2275 kW and control cabinet. Podpfxeyrnhle Acvogi Dimensions (approx.): Diameter incl. insulation: 1,500 mm Height: 2,000 mm Length: 3,400 mm Length with burner: 4,600 mm Shipping weight: 3.5 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Automatic restart after power outage Pjdpfx Acsylv Iyovegi

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Pjdpfxjylv Dzs Acvjgi Mobile, mounted on caster wheels Ready to use immediately – just plug in and switch on Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Pedoyk Sgcepfx Acvegi

Condition: good (used), Year of construction: 1994, Heating boiler for hot water or steam. Fuel: wood chips. Heating capacity: 6 MW. Up to 120°C, permissible overpressure: 1 bar. Can also be operated with an oil burner as fuel. Dismantling must be carried out by the buyer. Pedoyiky Aopfx Acvsgi

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE Pjdpfx Aoyh Ebrecvjgi -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Pgjdpoyhlrmefx Acvsi

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Psdpfx Aeyf U R Hecvjgi Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2023, operating hours: 3,577 h, functionality: fully functional, overall weight: 2,500 kg, power: 130 kW (176.75 HP), heating capacity: 130 kW (176.75 HP), We are offering a converted overseas container equipped with a Herz Firematic 130 boiler system. The heating system delivers 130 kW and can be removed from the container for installation at another location if required. Additional doors have been installed in the heating container for maintenance and inspection, providing easy access to the equipment. The boiler is fired with wood pellets, and a pellet hopper with a capacity of approximately 1.5 tons is integrated within the heating container. Due to its container construction, the heating module is easy to transport. The interior of the container has been lined and treated with a special coating to prevent condensation drip formation. The heating system is in near-new condition and has only seen very limited use. The current operating hours total 3,577, which equates to approximately 149 days. The Herz Firematic 130 was manufactured in 2023. A buffer tank is included. Further technical information can be found in the attachment. Pgjdpfxjybbpho Acvji

Condition: new, Year of construction: 2026, functionality: fully functional, power: 250 kW (339.91 HP), Warm air generator for wood pellets and/or wood chips, with power ratings from 250kW to 500kW. Suitable for heating industrial halls, buildings, warehouses, as well as for drying processes such as hay, grass and other crops. Burners are compatible with biomass wood chips and pellet granules. Warm air capacities from 200kW to 500kW. Available in 40FT or 60FT containers. Lanox BV The Netherlands. Podpfx Acsyaly Usvogi

Condition: ready for operation (used), Year of construction: 2022, An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible. Podox Uq Uzopfx Acvjgi

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Pgodpfsx Uqc Eex Acvji

Condition: excellent (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 0324R004636, power: 349 kW (474.51 HP), pressure: 6 bar, temperature: 110 °C, tank capacity: 495 l, fuel: domestic gas H, operating pressure: 6 bar, RIELLO RTS349 3S boiler. Year of manufacture: 2022. Low hours of operation: 500 hours. Option to purchase the complete bottle washing line: PAC washer (4,500 bottles/hour), air blower, RIELLO boiler, conveyors. Pgjdpex R Uinefx Acvei

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Protection Class: IP20 Podpox Ihlkofx Acvsgi Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Pgodpfxex Ihiio Acvsi Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Pgjdpfx Aex Ihg Iocvsi Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Buyer have to arrange disassembly on site. Seller arrange crain, liftruck, full support on site + technical support. Podpfx Acex Idkpjvegi

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Pjdpfox Htirex Acvsgi