Biobuilds

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling Pedpezqt Dnefx Alwogr • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain Pjdozf Nk Tjpfx Alwjgr • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Pjdpozcrlcsfx Alwjgr Electric adjustable mast height Mobile on castors Excellent condition

Condition: used, OK Continuous Bag Sealer Stainless steel Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950 Pgjdpfx Ajzcg R Tolwjr

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Adjustable height Adjustable temperature control for different gauge bags Pgodpfszcff Aox Alwer Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Pgedezbnnkspfx Alwer Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Psdozbnmgspfx Alwogr Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Pgodpfxsxa Elcs Alwor

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including volumetric dosing unit, 1 cup, single bucket conveyor and outfeed conveyor. Suitable for granulate-type products such as sugar, rice, beans, nuts, etc. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air exhausting device, supporting device of finished bags, hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 3000ml; film width: max. 520mm; bag size (mm): min.-max. L(80-400)xW(80-250); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1150x1790x1650mm; machine weight: 600kg. Capacity of dosing hopper is up to 50l. Single bucket conveyor has a material capacity up to 50l. The container is filled manually in the bottom position. In the top position it will be emptied automatically (complete cycle: 1 minute). - Specifications: height: 3-5m; 220V, 1kW; stainless steel; dimensions: L1400xW700xH3500mm. Generally it has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications are possible. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L1150xW5040xH3500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pedev Nmkcepfx Alwjgr

Condition: new, Year of construction: 2025, Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 3000ml; film width: max. 520mm, bag size (mm): min.-max. L(80-400)xW(80-250); max. speed of the machine in neutral: 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1150x1790x1650mm; machine weight: 600kg. The auger dosing unit has a capacity up to 50l (hopper) and following specifications: filling range: 10-1000g; max. speed of the machine in neutral: 50 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; auger filler dimensions LxWxH: 690x1030x1100mm; weight: 150kg. Screw conveyor for automatic transport of powdery materials to the auger filler. The vibration motor assured an evenly product flow. Capacity of infeed hopper up to 150 l. - Specifications: Hopper, conveyor length and angle can be customized to meet individual customer requirements. Total dimension depends on it. Length of conveyor: 3~4m; stainless steel 304; packaging speed 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations from specifications are possible. Supporting pole optional. The outfeed conveyor has a stainless steel 304 frame. Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm, weight: 80kg. Total dimensions of complete system approximately L2350xW3100xH2500mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. Pgodsv Nmkvopfx Alwor That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, 4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power: 380V, 6,3kW; compressed air: 1,4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Podpfx Aev Nmx Tolwogr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute; suitable for volumes from 5-20ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-80mm; bag size: max. L50-110xW30-80mm; without air pressure; 220V, 1.7kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 350kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Pgodev Nmywepfx Alwor Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute; suitable for volumes from 10-50ml; stepless bag length regulation; accuracy: depending on water level product; max. film width: 30-80mm; bag size: max. L50-110xW30-80mm; without air pressure; 220V, 1.7kW; stainless steel version (SS201 in housing, contact material part SS304); machine dimensions: L790xW600xH1780mm; weight: 400kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Pgjdpfev Nmy Dex Alwor Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute; suitable for volumes from 0-1000ml; filling temperature: up to 80°C; accuracy: +/- 1.0% (depending on product); max. film width: 430mm; bag size: max. 340x210mm; 1.5m³, 6bar; 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7" touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, 550kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pjdpfxev Nmzuj Alwjgr

Condition: new, Year of construction: 2025, Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch). Including liquid dosing device (for high viscosity liquids). Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml; bag size: L(120-180)xW100-150)mm; max. speed of the machine in neutral: 25 cycles/minute; accuracy: +/- 1.5%; 220V, 1.7kW; 0.4m³, 6bar; machine dimensions: L1450xW930xH2370mm; weight: 330kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Podpfxsv Nmz Io Alwegr

Condition: new, Year of construction: 2025, Packaging system for dosing and filling granules into pre-made pouches and vacuuming of the pouch. Work steps: Removal of the bag, dosing of the granulate by means of a scale, forming the bag into a brick shape before filling, vacuuming and sealing of the bag. Suitable for granular materials such as coffee beans, cereals, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizer, etc. PLC controlled, operation via touch screen. Suitable for poly bags. - Specifications: filling range: 500-5000g; accuracy: = 5g; max. speed of the machine in neutral: 9 cycles/minute; power: 380V, total 5kW; compressed air: 0,85m³/min, 6-8bar; dimensions of the machine: L2260xW2925xH2500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pedpfjv Nm Afjx Alwogr

Condition: new, Year of construction: 2025, Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw); accuracy: +/-0,5%; max. speed of the machine in neutral: 8 cycles/min; capacity of storage hopper: 100L; power: 380V, 50Hz, 3kW; stainless steel version AISI 304; machine dimensions: L1150xW1000xH2550mm; weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m³/h; capacity of storage container: 100L; pipe diameter: 159mm; standard angle: 45° (customization possible 30-60°); current: 3P, 380V; machine dimensions: L1160xW890xH1000mm; weight: 150kg. -Specifications sealing machine: Suitable for bags with h: 450-750mm; sealing angle adjustable by 20°; machine dimensions: L720xW560xH1340mm; weight: 100kg. - Sewing machine specifications: Suitable for bags with H: 400-900mm; coiling width: 30-50mm; conveyor belt length: customized. Dimensions and total weight of the system depend on the final layout, can be customized. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pgjdpov Nm D Njfx Alwjr

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly; SIEMENS PLC; WEINVIEW touch screen; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 90 cycles/min; bag sizes: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4kW; air pressure: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pgsdpfx Alsv Nncaewer

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly; SIEMENS PLC; WEINVIEW touch screen; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 90 cycles/min; bag sizes: L(40-310)xW(70-200)mm (double film pulling L = 450mm), gusseted stand-up pouches: L(40-310)xW(60-150)xD(30-80)mm (double film pulling L = 450mm); suitable film width: 160-420mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.4kW; air pressure: 0.7MPa; compressed air consumption: 0.20-0.35m³/min; weight: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Podpfev Nncmjx Alwogr

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). High-Speed Version with servo driven continuous sealing unit for end sealing. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 120 cycles/min; bag sizes: L(40-300)xW(60-200)mm, (double film pulling possible for longer bags); suitable film width: 140-420mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; weight: 580kg. Podov Nnfujpfx Alwsgr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 90*2=180 cycles/min; bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags); suitable film width: 140-380mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.4m³/min; dimensions (LxWxH): 2270*1560*1880mm; weight: 900kg. Podpfx Ajv Nnfzelwsgr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing 3-side OR 4-side seal bags. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min; bag sizes: L(40-210)xW(60-160)mm, (double film pulling possible for longer bags); suitable film width: 120-320mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 2.4kW; air pressure: 0.2-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1326*1066*1503mm; weight: 450kg. Pgedpfx Aev Nnf Ijlwer Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing 3-side OR 4-side seal bags. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 50 cycles/min; bag sizes: L(40-330)xW(70-210)mm, (double film pulling possible for longer bags); suitable film width: 140-420mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.5kW; air pressure: 0.2-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1208*1030*1620mm; weight: 450kg. Pjdev Nnf Uopfx Alwsgr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine for making Doypacks or flat bags with zipper or without. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min; bag sizes: L(120-235)xW(60-200)mm; suitable film width: 280-520mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.7m³/min; dimensions (LxWxH): 2090*1820*1935mm; weight: 800kg. Podpfx Aljv Nngfewegr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into double chamber tea bags. Including Volume dosing unit and tag system. Tag system: stapled (label-thread and thread-bag). Forming the double chamber bag by cold sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 130 cycles per minute; dosing volume: max. 10 cm³ (adjustable); hopper capacity: 13 dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60 mm; roll width tea bag material: 94 / 103 mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32 mm; thread length: 148 mm (±5 mm); material diameter staples: 0.5 mm; power supply: 220/380V; power consumption: 10kW; compressed air required: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400 mm; weight: 4250kg. Psdpfx Aev Nlhgelwegr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.