Interplan GmbH

Condition: excellent (used), Year of construction: 2002, heating capacity: 180 kW (244.73 HP), nominal heat output: 180 kW (244.73 HP), Nominal thermal output: 180 kW Power range: 45–180 kW Fuels: Wood chips (G20–G60) Sawdust Wood pellets Wood waste and chipboard scraps Permissible water content of the fuel: up to approx. 50% Combustion system: Double grate underfeed combustion Boiler type: Three-pass fire-tube boiler Fully refractory-lined combustion chamber Automatic ash removal Maximum supply temperature: 95 °C Gedpjzc Uu Tefx Afkobn Maximum operating pressure: 6 bar Efficiency: approx. 85–91% Flue gas temperature: Full load: approx. 190 °C Partial load: approx. 130 °C CO emission: < 250 mg/m³ Dust emission: < 150 mg/m³ NOx emission: < 100 mg/m³ (for softwood) Dimensions and weight Length: approx. 2,130 mm Width: approx. 1,180 mm Height: approx. 2,280 mm Weight: approx. 3,440 kg Flue gas outlet: Ø 250 mm Supply/return connection: DN 80 With Mawera RSS silo discharge system

Condition: refurbished (used), functionality: fully functional, Erjo 90 HSMU 802 – Fully refurbished and in like-new condition. Godpezc Iuyofx Afkjbn

Condition: reconditioned (used), functionality: fully functional, Bruks 803CS chipper in very good condition. Gjdpszc It Aofx Afkobn

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge Gbodpfxjzcvhuo Afkon – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR630 ecoline Gbodozcna Aepfx Afksn The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical yet powerful solution. The machines are manufactured and distributed directly from our factory in Germany. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecoring - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR630 ecoline_Ecoring Rößler recycling shredder – “Made in Germany”

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,400 kg, total length: 2,135 mm, total width: 1,480 mm, total height: 1,775 mm, working width: 830 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 20, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 830 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR830 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and woodworking operations that are looking for an economical and high-performance solution. The machine is manufactured and distributed directly from our factory in Germany. Advantages - Continuous, consistent shredding process - High performance with low energy consumption Gbjdpfx Aezcf Ttjfkon - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Siemens PLC controlled - MHR830 ecoline Rößler shredders – "Made in Germany"

Condition: excellent (used), Catalogue number 7260 TECHNICAL SPECIFICATIONS - Loading hopper inlet: 870x730 mm - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife dimensions: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: Ø 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg ADVANTAGES Gbodpfszcd H Eox Afkon – Pressing drawer – Very good condition – Used wood chipper Net price: 32,900 PLN Net price: 7,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm Godpjzccdpsfx Afksbn - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Infeed height: 300mm Gsdpfxszcby Ne Afksbn Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Gedpfxezcbyvj Afkebn Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2023, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,200 kg, fuel type: electric, color: dark red, loading space volume: 0.6 m³, loading space width: 630 mm, loading space length: 820 mm, loading space height: 1,050 mm, This shredder is brand new. Gedpfx Afozca Acoksbn

Condition: used, functionality: unexamined, power: 27.38 kW (37.23 HP), gearing type: hydrostat, fuel type: gasoline, overall weight: 670 kg, axle configuration: 2 axles, Year of construction: 2008, operating hours: 69 h, LASKI F-500 H tree stump grinder / 37 HP, manufactured in 2008. Gedpezb H Szjfx Afksbn The machine was first used in October 2010. Two-axle tree stump grinder with a Kohler engine (installed in May 2021), a four-stroke gasoline injection engine with 37 HP and hydrostatic drive to the front axle. Grinding depth below ground level up to 380 mm. Grinding wheel with 18 Laski knives, diameter including knives 510 mm. Optional grinding wheel with 6 Multitip knives. The grinding wheel is driven by a multi-V-belt drive and an electromagnetic clutch. Tires: 4 narrow / 4 wide tires. Weight approximately 670 kg when fully fueled. A new engine was installed in May 2021 (currently with 69 operating hours). The first engine had approximately 260 operating hours. Due to a piston seizure, which I caused myself (forgot to refill the oil), a new engine was installed in May 2021. It runs smoothly and is ready for use. Last service (air filter, oil and filter change) in November 2025. The last use of the grinder was in August 2025. The machine is located in a hall in 90762 Fürth and is available for testing. Viewing appointment by arrangement. Accessories: Many original Laski grinding teeth (used). 2 ramps, each 250 cm long, made of stainless steel (load capacity per ramp 500 kg). 2 large gasoline cans. 1 grease gun (new) + grease nipples (new). 1 diamond grinding disc for angle grinder (for sharpening the grinding teeth). 1 grinding wheel for 6 Multitip grinding teeth. Attention: Important note! Due to new legal regulations, the sale is made without any warranty, guarantee or right of return. Sold as is! The sale is made excluding any liability for material defects!! Liability for damages to health, body or life, as well as for gross negligence and/or intentional breach of duty, remains unaffected! The grinder, including accessories, is sold as a source of spare parts! Since this is a private sale, I cannot offer any guarantee. The buyer agrees to this and acknowledges it with his purchase. If you have any questions or need more information, please feel free to send us a message.

Condition: excellent (used), operating hours: 915 h, Weima WL 4 Year of manufacture: 1999 Rotor width: 600 mm Number of shafts: 1 Gbsdpozbz Tmjfx Afken Main motor: 18.5 kW

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder MHR630 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical yet powerful solution. Gbsdpfxozbz H Hs Afken Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 rows of knives for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Controlled by Siemens PLC - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: used, Year of construction: 2022, Features: 5.5 kW motor; Hydraulic power 0.5 kW; Total installed power 6 kW. Dimensions: H 1450 mm x 1250 mm x 900 mm. Weight: 600 kg. Input opening: 760 mm x 570 mm; Rotor: Ø 240 mm x 350 mm. Working width: 350 mm. 12 blades (central) + 2 blades (side); Honeycomb blades 30 mm x 30 mm, fixed by a conical screw for better retention; Voltage: 400 V – 50 Hz. (Other voltages available on request); Noise level: 90 dB(A) – variable depending on material type. Standard paint finish: RAL 9010 and RAL 9006; Gedjzbuaaepfx Afksbn

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recyclable Material Shredder Chipper Wood Shredder MHR630 ecoline The MHR ecoline series are robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders impress with high performance, low energy consumption, and an excellent price-performance ratio. This makes the chippers ideal for workshops, recycling companies, and woodworking businesses seeking an economical yet powerful solution. Advantages - Continuous, uniform shredding process - High performance with low energy consumption - Rugged construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) Gbodpfszbkxfex Afkjn - Siemens PLC controlled - MHR630 ecoline Rößler recyclable material shredder "Made in Germany"

Condition: excellent (used), Drawer shredder, 15 kW, 600 mm width, blades new, in excellent condition. Gsdpszbcuxsfx Afkobn

Condition: excellent (used), CATALOGUE NUMBER 8013 Gjdpfx Aozbb H Hofkjbn TECHNICAL DATA - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Material Shredder Chipper Wood Shredder MHR510 ecoline The MHR ecoline series are robust and energy-efficient wood shredding machines, designed for reliable continuous operation in commercial environments. These plug-and-play shredders impress with their high performance, low energy consumption, and excellent cost-effectiveness. This makes the chippers ideal for craft businesses, recycling companies, and woodworking shops looking for an economical yet powerful solution. Advantages - Continuous, consistent shredding process Godpfx Aezba T Sjfksbn - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR510 ecoline Rößler Material Shredder "Made in Germany"

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR Gbodpezbavajfx Afkjn (Price may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Gbjdpfx Afsza Tvdsksn Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and inexpensive to maintain. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Screening basket with interchangeable screen Foreign object detection/overload protection Automatic shut-off Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Rotor width: approx. 915 mm Rotor diameter: 325 mm Cutting blades: 40 pcs., (30 x 30 mm) Counter blade: steel, 1 pcs. standard Screen size: 7 - 40 mm (other screen sizes available upon request) Standard size feed hopper 920 x 1220 mm Flange adapter for extraction 200 x 200 mm Dimensions (L x W x H): approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: additional row of cutting blades on the rotor Gbodpoza Erksfx Afken second counter blade Cutting blades, screen, counter blade made of special steel Hopper dimensions according to customer requirements Hopper with pneumatically opening lid Note on used machines: • Errors and omissions in technical data and prior sale reserved. • The stated prices are ex-works prices, collection only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), CATALOG NO. 7191 Gsdpfx Afsza Erdjkebn TECHNICAL DATA - loading hopper inlet: 870x735mm - rotor working width: 720mm - main motor: 18.5kW - pump motor: approx. 0.75kW - number of knives: 17 pcs - knife size: 80x40mm - screen: 20mm - pressing drawer - electric auto-reverse - outlet for shredded wood: Ø250mm - dimensions (L/W/H): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressing drawer – very good condition – used chipper Net price: 33,900 PLN Net price: 8,070 EUR based on an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Gbjdpfoza Ek Hsx Afken Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft Gsdoza Ei Njpfx Afksbn - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)