Stia Comercializadora

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hsdjy Su Efopfx Aagsfg

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hfjdpfx Aaey Su D Usgsg

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Hfodpoy Su D Iefx Aagog

Condition: excellent (used), functionality: fully functional, Lathe in very good condition, fully operational and functioning. The TUR 50S x 1500 mm universal lathe is a classic machine tool version produced by the Wroclaw Mechanical Devices Factory (FAT Wrocław). Geometric and weight parameters: • Maximum turning length between centres: 1500 mm • Maximum workpiece length: approx. 1600 mm Hedpfx Ajy Su Dzsagsfg Key cutting and drive specifications: • Swing over bed: 500 mm • Swing over cross slide: 300 mm • Spindle bore diameter: 90 mm • Bed width: 432 mm • Main drive motor power: 7.5 kW / 11 kW (two-speed) • Number of spindle speeds: 21 mechanical steps • Spindle speed range: 18 – 1800 rpm • Tailstock quill taper: Morse taper 5 (MT5) • Tailstock quill travel: 180 mm • Rapid traverse rates: longitudinal 5.6 m/min / cross 2.8 m/min

Condition: used, machine/vehicle number: 543105, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hfsdoy Su Dnopfx Aagsg

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hedpfxey Su Dhs Aagsfg

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Hfjdsy Su Dbepfx Aagsg

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Hfedpfey Su A Rox Aagjg

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Hodpfxsy Su Aqs Aagofg

Condition: excellent (used), Offer consisting of: Heidelberg SM74-4P-H, year 1999, CP2000, 123 million impressions, all washing devices, inspection possible Hfodpfxjy Su Akj Aagjg

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Hedpfx Aajy Su Adogefg

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Hodpey Suz Tjfx Aagjfg

Condition: used, Year of construction: 2007, machine/vehicle number: 17037 / 2007, Temperature control unit from Robamat, used and untested. The unit is designed for applications in tool temperature control, injection molding, as well as industrial process engineering. It operates as a two-circuit system with the Thermocast 4212 control unit. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min and 5.0 bar*. Year of manufacture: 2007, total weight: 350 kg. Hedpfx Aajy Suz Hsgefg

Condition: used, length / mm width / mm height / mm Hjdpfx Aaey Suztsgefg weight / kg

Condition: used, length / mm width / mm height / mm Hedpsy Suzmefx Aagjfg weight / kg

Condition: used, GRUNDIG NSV 56 44206-860.02 for lid dialogue Condition: used (functional) Hfjdpfey Suzgjx Aagjg

Condition: used, feed pressure / bar liter capacity / l Hfsdpfx Asy Suzasageg power capacity / kW KSB ETAPRIME 4.14 222 GB09 close-coupled pump Weight: 45kg

Condition: used, VISCOTECH SEM12-F / 10030707 TFT 12" monitor The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional) Hedpfx Asy Suy Neagsfg

Condition: used, diameter / mm Cutting (quantity) / weight / kg FUJI MAX-OP1 Handwheel TEACH PENDANT Hfjdpfxsy Suy Ae Aagjg Electronic handwheel The handwheel works perfectly.

Condition: used, OKUMA POWER SUPPLY 5000T Hjdpfxsy Suyvo Aagsfg E0451-521-038 . 03487

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Item no.: 50122897 Hjdpfx Asy Suypjagofg

Condition: used, Siemens 6SC6112-0AA00 feed module The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional) Hfodpey Suyisfx Aagjg

Condition: used, power capacity / kW Hfsdpjy Suycofx Aagog volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m Siemens Brushless servomotor 1FK6060-6AF71-1TA0 No. YF U041 5127 02 003

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Hfodpfjy Sux Ssx Aageg Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, SIEMENS 6SN1123-1AA00-0EA1 LT-MODUL + 6SN1118-0AA11-0AA1 Hedpfx Aey Sux Eeagsfg Condition: Used (working), incl. 3-day functional guarantee after receipt of goods.