Edge banding machine

SCM Olimpic K360 HP T-ER1

Condition: excellent (used), Year of construction: 2022, Used edge banding machine - OLIMPIC K 360 R - Year of manufacture: 2022 Pgedpfxjxhc Evs Ag Dsw - Available from November 2025 - additional photos/video available

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation Pgjdexwuryspfx Ag Dow - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Podow S E Rqopfx Ag Dogw

Condition: like new (used), Year of construction: 2021, For sell Full automatic line for edge banding with loader, edgebander, robots for handling and drilling machine Edgebander specification: HOMAG EDGETEQ S-500 Profi KAR 375/20/V25/WZ edge bander Year of manufacture 2021 Continuous feed 16 – 25 m/min Workpiece thickness 12 – 60 mm Workpiece feeding system WZ10 fully automatic Workpiece length approx. 240 – 2500 mm Workpiece width approx. 120 – 1200 mm Release agent spray unit Jointing and trimming unit S2 with 2 motors, each 3 kW Gluing unit PUR with QA/PU adhesive application Edge magazine 24-position automatic Edge thickness approx. 0.3 – 3 mm Automatic and continuously variable edge clamp Pressure zone A with approx. 5 rollers Cross-cut saw unit PK25 with 2 motors, each 0.8 kW Pre-trimming unit BF10 with 2 motors, each 0.55 kW Profile trimming unit PF21 Flextrim with 2 motors, each 0.4 KW Form milling unit FK30/V20 with a maximum speed of 20 cycles/min Flextrim trimming unit, motor 0.7 KW and servo drive Multi-profile scraper MN21 automatic with triple tracing Flat scraper FA20 Buffing unit FP10 Standard trimming unit SF21 with a 5 KW motor For grooving and rebating Continuously adjustable vertical and horizontal axis Power Control PC 23 Powertouch control system Flexible edge tracking control and setup in the gap Specification of all the line: MUTZ Portal loading Year of manufacture 2022 Gantry with vacuum loading 3 pallet positions Feed roller conveyor WANDRES Una H-X 321 Surface cleaning Year of manufacture 2021 Brush top/bottom HOMAG RKT 100 Feeding K Feed roller conveyor Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse HOMAG RKT 100 outfeed roller conveyor with circulation system Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse Stacking station for pallets or circulation system HOMAG RKT 100 Buffer and sorting compartment system with circulation system Year of manufacture 2022 Buffer high-bay racking system Roller conveyors Robot removal roller conveyor for the racking system Racking system Circulation system Pgodpsxf Tvtofx Ag Dew KUKA KR 180 R3200-2K/FLR Robot with approx. 4 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3505 mm Plate gripper HOMAG DRILLTEQ H-600 Optimat BHX 500 CNC-controlled drilling machining center with circulation system Year of manufacture 2021 Workpiece length approx. 200 – 3100 mm Workpiece width approx. 70 – 1000 mm Longitudinal feed table with automatic workpiece feed Drilling head vertical top/bottom with each approx. 42 spindles Drilling head horizontal top/bottom with each approx. 8 spindles in X direction Drilling head horizontal top/bottom with each approx. 2 spindles in Y-direction Grooving saw unit top/bottom pivots 90° Milling spindle ETP top/bottom with each approx. 6 kW Speed 6.000 – 18.000 U/min Power Control PC86 Powertouch WoodWOP 7.2 HOMAG RKT 100 Stacking system Year of manufacture 2022 Roller conveyors WANDRES Una X 121 surface brush Outfeed roller conveyor KUKA KR 180 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3195 mm Vacuum traverse Layouts

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Pedpfxov Dt Spj Ag Degw Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) Pgodoxymd Tjpfx Ag Dsw BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min Pgsdpfx Ajxxlqveg Dsw The machine is in very good condition.

Condition: ready for operation (used), Year of construction: 2021, Additional Equipment Mobile Console with integrated PC"eye-M": 21.5" LCD color display through a 16/9 sized touch screen / AAR Anti-Adhesive Device: Positioned before panel edge trimming unit / Spray-Mist Device: Positioned for edge finishing and glue cooling / Loader for Narrow Pieces: Device to facilitate manual square loading of narrow pieces Pgodpfsxn Ux Uex Ag Dow This SCM STEFANI MD edgebander was manufactured in 2021. It features a versatile automatic edge banding capability for solid wood up to 15 mm, with an option for 22 mm. The machine includes an "SGP" glue pot for both EVA and PUR glues, ensuring a perfect joint line. The "Startouch" control system offers a 12” touch-screen display, customizable working programs, and graphic simulation of machining. Ideal for high productivity with speeds up to 25 m/min. Contact us for more information. Application Types Edge Banding

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Max feed speed: 32 m/min Pedpfxew Idhts Ag Dogw Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Glue height adjustment / touch nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Podpfx Agoxy Nxys Djgw Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch