Multispindle

Schütte SF81 cnc

Condition: used, CNC Univ. tool grinding machine SCHÜTTE type BU 400 CNC 4 Vm8Rgkkk serial no.: 03-02 year of construction 1990 Machine not ready for operation - electrically without function - without CNC control 4-axis (X, Y, Z and R) Table clamping surface 1300 x 250 mm Center width 700 mm Center height 155 mm Sanding length (X-axis) max. 400 mm Sanding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 Volt, 50 Hz, 25 Amp. - CNC control dismantled Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control missing. good condition, ideal for control conversion

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm Btrf89Esma grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Year of construction: 2005, Condition: ready for operation (used), Axes: 5, sanding length: 330mm, max. workpiece diameter: 235mm, travel X/Y/Z: 400mm/250mm/250mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/1900mm, weight: approx. 2800kg, control: Siemens Sinumerik 840D, operating hours: approx. 22000h. Documentation available. An on-site inspection is possible. Dpsx7V

Condition: used, TECHNICAL DETAILS - Number of spindles : 9 - Bar capacity : 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque : 18.5 [Nm] - Max. spindle speed : 7000 [rpm] - Stroke X : 70 [mm] - Stroke Z : 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke X : 110 [mm] - Travel Z : 125 [mm] COUNTER SPINDLE 7 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke Z : 300 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Installed power : 109 [A] DIMENSIONS - Floor dimensions : 9.100 x 1.805 [mm] - Machine height : 2,800 [mm] - Machine weight : 18.500 [kg] MACHINE HOURS - operating hours : 82000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D Cytptok870 - Chips conveyor - Bar loader : SIR 36/33 F - Coolant tank : KNOLL VRF 450/2600 * with high pressure pump * with paper filtration * capacity : 2600 [l]

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 0101, spindle speed (max.): 12,000 rpm, We are selling a Schütte WU 305 5-axis CNC tool grinding machine. Available from October 2024 Can be viewed under power. Machine is currently still in use. All functions such as grinding wheel change and pick-up pallet work. Update to SIGSPro Large XP computer B8L23Hw0Wq 3D simulation

Condition: used, Year of construction: 2015, Ref. -No.: 10418 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Cveprnnlh8 work spindles: 6

Condition: good (used), Year of construction: 1980, Pick-off devices for backworking on automatic lathes Schütte - Pittler 1X for up to 36 mm Buolk2Ad 1 X for up to 42 mm 1X for up to 50 mm 1X shaping head Complete with base plate and drive shaft .

Condition: used, Year of construction: 1995, Functionality: unexamined, Description of the machine Offer for sale of the CNC machine MAHO DMU 80 overview We are offering for sale a professional 4-axis CNC machine MAHO DMU 80, built in 1995. The machine from the renowned DMG brand is known for its exceptional precision, solid construction and high technological performance. The MAHO DMU 80 is the ideal solution for companies that require a versatile and reliable machine for one-off, small series or prototyping production. Main advantages: Bry9Ylotbec 4-axis version: The rotary tilting table allows complex workpieces to be machined in a single set-up. Precision Millplus CNC control Can machine a wide range of materials, including steel, aluminum and plastics. Reliability and durability thanks to a solid, stable construction. Technical data: Working range: X-axis: 800 mm Y-axis: 600 mm Z-axis: 600mm Rotation axis (C): ±360° Tilt axis (B): -10° to +95° Rotary and tilting table: Table size: 800x650mm Maximum table load: up to 800 kg Spindle: Spindle speed: up to 10,000 rpm Spindle power: 15 kW Spindle holder: SK40 Control system: MILLPlus, an intuitive and reliable system with 5-axis programming functions. Tool changer: Number of positions: 24 tools Tool change time: 5 seconds Machining accuracy: Positioning accuracy: ±0.005 mm Repeat accuracy: ±0.003 mm Dimensions and weight: Dimensions (L x W x H): 6000 x 4000 x 2500 mm Weight: approx. 6 tons Cooling system: Internal cooling system, can also be upgraded for more demanding materials. Condition: The machine is fully functional and in good technical condition.

Condition: used, Year of construction: 2007, turning diameter 18 (16) mm turning length - mm control Siemens spindle circle diameter 180 mm bar feed max. 80 mm longitudinal slide -travel 50 (63) mm cross slide - travel 20 (32) mm Spindlespeed 800 - 8.000 min/-1 power capacity - main spindel 11 kW Torque 18 Nm dimensions of the machine ca. 6,0 x 1,5 x 2,2 m Cmfm9J2W7O weight of the machine ca. 5,5 t CNC-Bar-Automatic-Turning Machine SCHÜTTE - SG 18 - Co2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar feeder PRA 52 42 F - Tool package - Curve package - various clamping devices

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DMA MACHINERY 2024-L....., feed length X-axis: 9,223,372,036,854,775,807 mm, feed length Y-axis: 130,016,002,100 mm, feed length Z-axis: 130,900 mm, workpiece weight (max.): 1,500 kg, total height: 2,200 mm, rotational speed (max.): 24,000 rpm, type of input current: three-phase, air pressure: 7 bar, drill spindle length: 250 mm, extraction nozzle diameter: 150 mm, warranty duration: 12 months, BLACK FRIDAY 20% OFF DMA MACHINES DISCOUNT UNTIL 20-12-2024! Coqjiv7Arq see models on website dmamachinery D.M.A. Machinery Dutch manufacturing for unmatched quality and reliability. At DMA Machinery, we pride ourselves on our in-house production, where we have complete control over every aspect of the manufacturing process. This allows us to maintain the highest quality standards and deliver machines that excel in reliability and durability. With our dedicated team of technicians and engineers, we ensure that each machine is built with meticulous care and expertise. Choose DMA Machinery and enjoy the peace of mind that comes with our in-house manufacturing and the guarantee of high-quality products. Dutch Manufacturer | EC Marking (CE Standard) | Manual; NL, English, Turkish, Italian, Polish, ..... Manufacturer D.M.A. Machinery Model Express-Router ATF SMART type Nesting dimensions: 1.600x3.200 Z-AS 210mmMM ( optional up to 400mm ) machine type CNC machine tool nesting they are always new machines tool changing station 12 pcs multi-position ( rotary carouser optional up to 18 positions ) nesting CadCam software Pegasus milling & panell Double groove saw (X-Y-AS )unit optional 9.5Kw ATC Spindle 12Kw ATC Hiteco spindle HSK optional 12.5Kw HITECO HSK spindle tool holders ISO30 | HSK63F ( ER32/ER40 ) HSK63F ( SCM Hiteco ) optional speed 1.000 / 24.000Rpm Vacuum pump 5.5Kw-250M3/h Lubrication system automatic standard ( grease ) CadCam software postprosessor included inport: DXF, jpg, png, eps, plt,... simulation software nesting optimization

Condition: excellent (used), Year of construction: 2013, operating hours: 1,169 h, Functionality: fully functional, Ladies and Gentlemen, Cnjn8Sv0Ak We offer you a very well equipped Schütte grinding machine. Please refer to the technical data sheet for a technical description.

Condition: used, Year of construction: 1990, Ref. -No.: 10419 Manufacturer: SCHüTTE Type: SF 26 Dqpead Year of construction: 1990 Storage location: Halberstadt Country of origin: Germany

Condition: used, thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Ce80Dqf0Bq -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4" -Shaft: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 760 h, Functionality: fully functional, total length: 2,900 mm, total height: 1,000 mm, overall weight: 300 kg, total width: 930 mm, compressed air connection: 6 bar, motor voltage: 380 V, Pneumatic Cross Cut Saw Utxrazwuhl

Overall weight: 39,000 kg, empty load weight: 7,230 kg, maximum load weight: 31,770 kg, axe configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, first registration: 10/2008, suspension: air-lift, color: white, Condition: used, gearing type: other, driver cabin: other, Equipment: ABS, * German semi-trailer * Schütte Fahrzeugbau Curtainsider * 1st hand * 1st axle lift axle * 3rd axle positively steered * Truck-mounted forklift device * Sliding tarpaulin left and right * BPW eco plus axles * Disc brakes * Portal doors * Screen printing floor * Perforated outer frame beveled right & left Cxippate3T * Lashing rail in the middle of the floor * Load compartment dimensions: L=13,600 x W=2,500 x H=2,650 mm * Air suspension * ABS/EBS * Haacon landing gear * Spring-loaded brake cylinder * Duomatic * Max. gross vehicle weight: 39,000 kg * Payload: 31,770 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2006, x-travel 3000 mm y-travel 1600 mm z-travel 760 mm Control Fanuc 18i MB column daylight 1700 mm table surface area 3260x1500 mm passage 1000 mm table load 10 t drive of main spindle 22 kW spindle turning speed - stepless 10-6000 U/min tool taper ISO 50 rapid travel 20.000 mm/min rapid traverse Z-axis 10.000 m/min toolpiece magazine: chain magazine 32 Stück diameter of tools max. 127/215 mm Power connection 60 kVA total power requirement kW weight of the machine ca. 27 t dimensions of the machine ca. 9x4,7x4 m Cejbhqo7

Condition: excellent (used), Software license HOLZHER / DIREKT CNC-SYSTEME HOPS 6 -use with USB dongle CODEMETER, incl. activation for Academy, incl. activation of job list, as office version or for machine Quality info: Bsmeas7Mpce - tested for perfect function

Year of construction: 1988, Condition: used, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 1988 Storage location: Halberstadt Country of origin: Germany Dqpean

Condition: used, thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder Ce829Dq9Ce -Type: SH 3/4" -Shaft: Ø 40 mm -Dimensions: 265/130/H160 mm -Weight: 7.1 kg

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. For further details, please refer to the attached PDF file. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. Nmaoj The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.

Condition: used, Year of construction: 2008, machine/vehicle number: 23-07, number of spindles:6 spindle passage:18 mm turning length:63/50 mm Twl988Gf weight of the machine ca.:4,5 t spindle drive motor:11 kW

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,572 h, General Data Machine weight 5000 Main Drive Spindle speed range 1000 Additional Equipment G0Cvwcz Cucchi Giovanni DBM.821 (2009) loader included This Schütte SG18 multi-spindle turning machine was manufactured in 2009. It features a largest rod diameter of 18mm, spindle circle diameter of 180mm, and bar feed of 60mm. Includes a Cucchi Giovanni DBM.821 loader. With a total weight of approximately 5000kg and a spindle speed max of 1000 1/min, the Schütte SG18 machine we have for sale is robust. Contact us for further details regarding this multi-spindle turning machine. Application Types Turning

Condition: excellent (used), Software license HOLZHER / DIREKT CNC-SYSTEME HOPS 6 incl. Sim with USB dongle CODEMETER, incl. activation for Academy, incl. activation for job list, incl. activation for simulation Bsmdhoif2Jw Quality info: - Tested for perfect function

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW U0Ubvacmxf Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 6500 Main Drive Spindle speed range 800-10000 This multi-spindle turning machine was manufactured in 2009. It features a robust coolant system with a 600l capacity, spindle speeds ranging from 800 to 10,000 rpm, and can handle rod diameters up to 20mm. Weighing approximately 6500kg, this Schütte AG20 is a solid choice for precision turning. For more information about this multi-spindle turning machine, please reach out to us. Bshokzsktk8 Application Types Turning