Houfek buldog 5 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Working width:650 mm Number of sanding units:1 st. Workpiece thickness max.:3-160 mm sanding belt measurements:650x1900 mm Motor roller: kW Motor pad: kW Feed motor:5,5 kW Feed speed:18 m/min. Overall size:1200x1500x1800 mm Weight:800 kg :160 mm : m/sec : mm : mm :1 - : : - : : : mm : kW : : : : - : mm : mm : m/sec : kW : - : : mm : - : - : mm : mm : m/min : kW : - : - : - : - : - : - : - : - : - : m/min : - : - : - : - : - : bar : mm : mm : Set : - : - : Std :680 kg : cm B32m27cw : kW :... more
4
Technical description: Working width: 1100 mm Unit 1: for calibrating with steel roller 2rh87m Aggregate 2: Combination unit for fine grinding with grinding shoe and possibility to calibrate Table extension at the entrance and exit Grinding belt cleaning by compressed air with oscillation Cleaning brush at the output of the machine Fine adjustment of the table position more
7
Buldog 5 1100 mm working width Unit 1: to the calibrate Bej8yafvyt Unit 2: combo unit with sliding contact 4,5 and 9 m feed Cleaning brush on the output of the machine table extension at the input and output of the machine Weight ca 1.9 T Machine can be tested at any time and can be visited. more
6

Wide-belt sander Houfek SPB 1100 Buldog 5

Oberteisendorf, GermanyGermany dealership location
6936 km
2019
new
SPB Houfek 1100 Buldog 5 2018. 8uatvgpmy Strip width 1100 mm Work piece cleaning module (rotating brush) Calibrating roller - steel Combined aggregate of adjustable, fixed shoe Pneumatic sanding pad In- and outfeed table extension of automatic Tischpositionierer more
4

Wide-Belt Grinder HOUFEK BOLDOG 5-630

Jánská 449/12, 602 00 Brno-střed-Brno-město, ČeskoCzech Republic
7108 km
2012
ready for operation (used)
Wide-Belt Grinder Wood grinder- Wide-belt grinde Working width: 630 mm Sanding belt length: 1900 mm Diameter of the sanding roller: 160 mm Max. Workpiece height: 160 mm Min. Workpiece height: 3 mm Bdrb0yb0gt Motor power: 7.5 kW Feed belt speed: 4.5 / 9 m / min Sanding belt speed: 18 m / s Operating pressure: 5.5 bar Compressed air consumption: 20-60 l / min Exhaust air velocity: 20 m / s Suction hole diameter: 150 mm Voltage / Frequency... more
3

Wide-belt sander KBM; Houfek KRS 650 small

Thüringen, DeutschlandGermany
6650 km
2001
excellent (used)
Broadband grinding machine with 1 unit : "C" version = Fk3n9iv Grinding roller and grinding shoe as a combination unit Working width 630 mm; belt length 1600 mm. Roller D: 120 mm; belt speed 18m/s; Workpiece thickness 3 - 160 mm, Feed 4.5 and 9 m/min, main motor 5.5 KW, supply: 3x400V/50Hz, Compressed air consumption 20 l/min - operating pressure min. 5.5 BAR, Suction pipe-D: 1 x 150 mm, suction capacity optimal 3000m3/h with V= 20m/s Weight: approx. 770 kg Table stroke motorized, grin... more
5
Wide belt sander sanding width of 1100 mm 11 KW motor - Combi unit 1. standard equipment: 1.1 a grinding unit type C - a stripper + mechanically adjustable sliding contact 1.2 rubberized stripper Æ 120 mm, 90 sh 1.3 belt length 1900 mm 1.4 motorized table Hub 1.5 automatic star / triangular start-up of engine 1.6 Ammeter for current measuring of the grinding unit engine 1.7 abrasive belt oscillation control using an opto-electronic reader with infrared ray 1.8 Tischpositionierer 1.9 electronic ... more
4

Telehandler JCB 541-70

Dromore, United KingdomUnited Kingdom
5361 km
2010
excellent (used)
2010 JCB 541-70 Turbo Powershift Telehandler c/w Joystick Controls, QH, Forks Stfyhc This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more


houfek bul...
daily

New machines via email!

Stay updated!
2
Make De Dietrich & Cie. France, Type AE-2500, No 57949, New 1989, Lining material Glass - Enamel (3009), Reactor (1x), Capacity 3468 Ltr, Vessel sizes dia. 1600x1600mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections 5x dia. 100mm + 2x dia. 200mm, Outlet dia. 100mm, Working pressure vac/6 bar, With jacket (380 Ltr), Working pressure vac/7 bar, Max. temperature -25/+200 Degr. C., With anchor stirrer , Motor 500 Volt (Ex), Speed mixing shaft variable, Floorspace 2,... more
5

Band Saw - Automatic - Horizontal MEBA 335 DGA-1000

Niederlangen, GermanyGermany dealership location
6338 km
2011
used
cutting diameter:335 mm saw band length:4400 mm cutting width:500 mm capacity 90 degrees: round:335 mm capacity 90 degrees: flat:500 x 335 mm capacity 45 degrees: round:re. 330 li. 305 mm capacity 45 degrees: flat:re. 320 x 335 li. 305 x 335 mm capacity 30 degrees: round:re. 180 mm capacity 30 degrees: flat:re. 170 x 335 mm Bffgpi80zu cutting speed:18 - 115 stufenlos / stepless m/min down speed:0 - 300 stufenlos / stepless mm/min dimensions of saw-band:4400 x 34 x 1,1 mm workpiece weight:max... more
2
MAKE - Power Band ReSaw PBR-HD Wadkin H.P15 YEAR 1992 Betn98djge Machine can be seen working more
5

Lateral Milling Machine JOBS JOMACH 159

Mönchengladbach, GermanyGermany dealership location
6363 km
2005
used
x-travel:18000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° feeds:1 - 16000 mm/min rapid traverse::16 m/min weight of the machine ca.:72 t total power requirement:65 kW M27qp dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
8
Control: Heidenhaim iTNC 530 Travel: X-axis 2,500 mm Y-axis 650 mm Z-axis 520 mm Clamping area 3,000 x 600 mm Pendulum operation 2 x 1,025 x 650 mm Table load: 2,000 kg Recording: SK 40 Tool magazine: 30 - tray Spindle speed: 8,000 rpm Hjpfpi9 Rapid speed x,y,z: 45 m/min Accessories - Filter system - Chip conveyor - Partition wall more
4

Telehandler JCB 535-140 HI VIZ

Dromore, United KingdomUnited Kingdom
5361 km
2015
excellent (used)
2015 JCB 535-140 HI VIZ Turbo Powershift Telehandler c/w Reverse Camera, WLI, A/C, Forks Bfgxynnhpa This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Make Glatt, Type WSG-5, No 2066, New unknown, Material Stainless steel, Fluidbeddryer (1x), Granulator , With pan , Pan sizes dia. 380x250mm, Capacity 20 Ltr, With sprayer , With electric heating (15 KW), With fan , Motor 1,85 KW, 220/380 Volt (Ex), With switchgear , Floorspace 1,3x1,2 M, Total height 2,2 M, Weight 600 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You... more
11
Automatical band-sawing machine made : B E H R I N G E R Modell : HBP 530 A / 4 HM new : 1998 Condition : good – in operation Heavy fully hydraulic operated band-sawing machine for precise cutting of difficult machinable full material with hard metal bands. Sawing capacity round 530 mm Sawing capacity flat 530 x 500 mm Minimum round / flat 20 / 20 x 20 mm Sawing band dimension 7300 x 54 x ... more
1

Schleifscheibenabricht - and roll forming machine Farman FC 250-EX

Cloppenburg, GermanyGermany dealership location
6393 km
2019
ready for operation (used)
Description: Suitable for aligning and profiling diamond and CBN grinding wheels. Technical data: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond/ CBN disc spindle infinitely adjustable 100 - 1000 rpm, connection value of the motor of the Grinding wheel 1.75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 6... more
15
Presto, type HPK 50 BSK, Nr. 4, year of construction 2009, drive power 22 kW Technical specifications: Manufacturer Presto Type HPK 50 BSK Year of construction 2009 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 12363 h Channel cross section 1100 x 700 mm Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 35 kg/m³... more
12
Used lathe Internal machine number: m2643 Manufacturer Nardini Type MS 175 0rev93ji Machine number D5JEX099 Built in 1995 Tip width 800 mm Tip height 175 mm Weight 1,100 kg With 3-jaw lining Röhm Item location: 58730 Fröndenberg/Ruhr We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. An intermediate sale is reserved. It is possible to examine the items for sale, suburban expertly. Specific issues should be clarified in advanc... more
4

Work Platforms Genie S-65

More Genie S 65
Dromore, United KingdomUnited Kingdom
5361 km
2006
excellent (used)
2006 Genie S-65 Wheeled Boom Lift Access Platform Nobbp This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Make Technoglass/De Dietrich (vessel/cover), Type AE-2500, No 2804/62331 (vessel/cover), New 1984/1997, Lining material Glass - Enamel, Reactor (1x), Capacity 3510 Ltr, Vessel sizes dia. 1600x1500mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections (7x), Outlet dia. 80mm, Working pressure vac/6 bar, Test pressure 9,1 bar, With jacket (373 Ltr), Working pressure vac/7 bar, Test pressure 10,4 bar, Max. temperature -25/+200 Degr. C., With paddle stirrer , Motor 5,5/8... more
5

Double Column Milling M/C - Gantry Type UNISIGN UNIPORT 5

Mönchengladbach, GermanyGermany dealership location
6363 km
1992
used
x-travel:2400 mm B839ba7s y-travel:1800 mm z-travel:750 mm no. of tools in the magazine:26 Stück spindle motor:20 kW spindle taper ISO:50 spindle turning speed range:10 - 3000 U/min feed range:5 - 10000 mm/min total power requirement:50 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,8 x 5,7 x 4,7 m Machine with SIEMENS 820 M control - tool changer for 26 positions - coolant through spindle - angualr milling head - coolant device more
6

Cycle Lathe CHEVALIER FCL-2580H

Bochum, GermanyGermany
6398 km
2018
as good as new (ex-display)
Cycle lathe, built 2018, immediately available, including 2 daily programming training at the customer's W9gco 4-speed turret head quick-change holder PARAT Reinforced coolant pump LED lighting Additional portable handwheel High-quality 315 RÖHM wedge rod chuck SIEMENS 828D with full-fledged ShopTurn dialog programming 3D simulation Thread repair cycle Positionable rotary spindle more
4

Shredder ZENO-MASCHINENBAU ZTLL 420x750

Altenkirchen (Westerwald), GermanyGermany
6461 km
2001
ready for operation (used)
ZENO SHREDDER mit Sondertrichter Beromoepyw ZTLL 420x750 Antrieb:7,5 kW. more
0
Travel axes: 550 x 350 x 300 mm [ X x Y x Z ] max. workpiece size X: 750 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm 0tve7ljw max. workpiece weight: 680 kg table size X: 790 mm table size Y: 500 mm with AWF ( Automatic Wire Feeding ) submerged more
1

Articulated Dumper Volvo A25D

More Volvo A 25
Dromore, United KingdomUnited Kingdom
5361 km
2002
excellent (used)
2002 Volvo A25D 6x6 Articulated Dumptruck Bfgw3wp3id This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Material Stainless steel, Hot mixer "High speed wet mixer" (1x), Capacity 90 Ltr. (Useful 75 Ltr.), Vessel sizes dia. 500x600mm, With jacket , Working pressure unknown, With motor 7,5/9,0 KW, 380 Volt (Ex), Outlet dia. 75mm, Manhole dia. 260mm, Floorspace 1,3x1,1 M, Total height 2,1 M, Weight 650 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect... more
5
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW S3tz8h Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEM... more
4
Hamada B452A, Max sheets size 520 x 365mm, Stream feed pull lay system with vacuum belts at feeder very accurate, Speed 10,000 IPH, IR drying, Blanket wash, Ink key control system allowing you use your plate profiles , de curler, Auto plate set up with EPS, Chiller recirculator, Static eliminator, machine is operated by owner so is kept in new like condition, low impressions under 20million. Bfgowxwlau more
5

CNC Lathe STYLE 510 Series

Niederlangen, GermanyGermany dealership location
6338 km
2014
as good as new (ex-display)
turning diameter:510 mm turning length:1350 mm control:Style CNC turning diameter over slide:300 mm bed width:330 mm Bfge2n0kxs max. weight of workpiece set on faceplate:1000 kg max. turning weight [...] w/o steady:600 (750kg mit schweren Reitstock) kg feed speeds:0,01-1000 mm/min spindle bore:80 mm spindle taper:D1-8 / D1-8 spindle speed max.:Getriebe: 2500 (80) / 2100 (102) U/min quill stroke:160 mm pinole diameter:75 mm total power requirement:16 kW weight of the machine ca.:2,7 t dimensio... more
5
screw size:35 mm injection shot weight in Polysterol:176 g/PS closing pressure:2000 kN daylight:520 x 520 mm opening stroke:max. 650 mm mould height - Max./min.:250 mm control:Selogica daylight between platens - max.:900 mm Yr2vyo total power requirement:46,3 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:5,50x2,10x2,20 m C version IV - LCD colour monitor, colour type - Selogica control unit - technology step 2 servoregulated with 2 regulating pumps - wear resistant plasti... more
4

Excavator Case CX50BS2

More Case Cx 50
Dromore, United KingdomUnited Kingdom
5361 km
2016
excellent (used)
2016 Case CX50BS2 Rubber Tracks, Blade, Offset, QH, Piped Clqwkpv This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Make Glatt Haltingen/Binzen, Type WSG-5, No 2337, New unknown, Material Stainless steel, Fluidbeddryer (1x), Granulator , With pan (2x), Pan sizes dia. 395x260mm, Capacity 20 Ltr, With sprayer on bottom of pan (additional "WSLD" pan), With pump , Motor 0,25 KW, 220/380 Volt (Ex), With Wurster-pan , Can be heated by steam , With fan , Motor 2,5 KW, 220/380 Volt (Ex), With switch , Floorspace 1,4x1,3 M, Total height 2,0 M, Weight 600 KG What you can expect from Foeth: all our machines are in worki... more
5
Make: DIGEP Type: DLB-12/3050 Built: 1986 Sheet thickness: 12 mm Useful length: 3050 mm Power: 22 kW Dimensions: approx. L 4.10 x W 2.20 x H 2.20 m Weight: approx. 14.5 t Facilities: - Mot. Back stroke Nobet - Angular stop - Support arms All information without guarantee. The machine is in very good condition. A demonstration is possible at any time in our exhibition hall. more
9
Used Kantbank Manufacturer Megobal Type PB 20.35 Built in 1998 Ma. No. 622235 Bfgpi7ocgr Item location: Until approx. 28.08. in 59425 Unna Then in 58730 Fröndenberg/Ruhr The machine can currently be inspected and tried out at the site under electricity. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. An intermediate sale is reserved. It is possible to examine the items for sale, suburban expertly. Specific issues should b... more
2
Folder Stahl KB 52 2, 4 pockets, one cross knife, stream delivery. F7cgjak Can ship worldwide. more
3
0t2du20k MSG-805, MAPPS swing diamter over bed Ø 680 mm max. turning diameter Ø 300 mm distance between centers 750 mm Max. turning length 350 mm bar capacity 45 mm Y-axis spindle speed: main and sub spindle, speed: 60-6000 U/min Turret: 12 postitions – all driven driven tools 3000 rpm swarf conveyor barfeeder IEMCA Master 880 MP more
4

Excavator JCB JS145LC

More Jcb Js 145
Dromore, United KingdomUnited Kingdom
5361 km
2013
excellent (used)
2013 JCB JS145LC 700mm Pads, VG, CV, QH, Piped c/w Reverse Camera, A/C - Choice of 2 Noa9j This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Make De Dietrich, Type CE-5000, No 17423, New 1982, Lining material Glass - Enamel (3008), Reactor (1x), Capacity 5445 Ltr, Vessel sizes dia. 1800x2497mm, Dished bottom , Dished top side , Manhole dia. 350x450mm (oval), Top connections 2x dia. 250mm + 3x dia. 150mm, Outlet dia. 100mm, Working pressure vac/6 bar, With jacket (694 Ltr), Working pressure 6 bar, Test pressure 7,8 bar, Max. temperature 200 Degr. C., With propellor stirrer "Impeller", Motor 10,0 KW, 380/660 Volt (Ex), Speed mixing sha... more
5

Toolholder HANKOOK SK 50

St. Ingbert, GermanyGermany dealership location
6494 km
used
tool taper:SK 50 weight: t tool clamping area: mm 0uayyfb7 more
6
Vehicle data - make: Toyota - type: 02-8FGF25 / / HH 3,700 mm / FH 1,800 mm / duplex / 3rd and 4th valve-very good condition - drive type: gas - load capacity: 2500 kg - load Centre of gravity:-lifting height: 3700 mm - range: 0 mm - built: 2012 - s ebsstunden: 6237 - internal No.: E0241 _ Mast data - mast type: duplex - lifting height: 3700 mm - height: 2380 mm - free lift: 1800 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Beilcizdhg Dimensions - length: 0 mm - width: 0 mm - height: 23... more
0
Noapb Travel axes: 350 x 250 x 300 mm [ X x Y x Z ] table size X: 590 mm table size Y: 530 mm max. workpiece size X: 300 mm max. workpiece size Y: 500 mm max. workpiece size Z: 400 mm max. workpiece weight: 500 kg electrode changer: 5 - time more
5

CNC lathe Mori-Seiki NLX 2500Y

Wiesbaden, GermanyGermany
6527 km
2015
excellent (used)
DMG Mori NLX2500Y/700 CELOS M730UM – ERGOline Touch Control Mfg Year 2015 Max. turning diameter 366 mm Max. turning legth 705 mm Barcapacity 80 mm Movements X/Z: 260/795 mm Y-axis: 100 mm +/- 50 mm Max. Spindlespeed: 4.000 U/min Spindlemotor: 15/18,5 kW Spindelnose: JIS A-8 C-axis: 0,001° Bezxzzz8pj 20 station turret Power On: 8.650 h cutting time: 3.600 h more
4

Excavator Hitachi ZX135US-5B

Omagh , United KingdomUnited Kingdom
5362 km
2014
excellent (used)
2014 Hitachi ZX135US-5B 700mm Pads, CV, QH, Piped, Aux Piping c/w Reverse Camera, A/C Jvcpla This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Northern Ireland on 13th-14th September. For more information go online. more
2
Make Romabau AG Weinfelden, Type 2500L, No 20076, New 1975, Material Stainless steel 1.4435 (316L), Reactor (1x), Capacity 3400 Ltr, Useful capacity 2500 Ltr, Vessel sizes dia. 1600x1267mm, Dished bottom , Dished top side , Manhole dia. 500mm, Top connections 2x dia. 400mm, Outlet dia. 80mm, Working pressure vac/3,2 bar, Test pressure 4,8 bar, Half coil jacketed (120 Ltr), Working pressure vac/13 bar, Test pressure 18 bar, Max. temperature 200 Degr. C., With propellor stirrer "Impeller", Motor 5... more
6
Shinohara 52 II, year 2002 Ref. D4278 36x52 - 2 Colors - ca. 20 mio impressions Equipped with : SPC Shinohara (Semi-Automatic Plate Change) E9iqwng Automatic Washers Devices : Blanket Cylinders & Inking Rollers Shinohara Alcohol Dampening Technotrans Alpha.d Refrigeration System Segmented inker Plate Punch Including Tools, Manuals and Accessories Machine in good condition Avalaible now more
6
Multi-storey shelving storage system Com-No.: 816 961 Manufacturer:Fritz Schäfer GmbH SSI Schäfer Shelf type: R5000 Built in 2004 Nobf2 Load capacity with uniform load distribution max. Transport routes: 500 kg/m3 Intermediate routes: 500 kg/m3 Fuel load: 100/200/300 kg Field load: 2000 kg more
8

Machining centers (vertical) Hyundai Kia Hi V50D

Kaiserslautern, GermanyGermany dealership location
6526 km
2005
ready for operation (used)
Control Unit Brand FANUC Model Series 21i-MB Main Drive Number of spindles 1 Spindle speed range 8000 rpm Movement X-Axis Movement 600 mm Y-Axis Movement 460 mm Z-Axis Movement 570 mm Tools Slots in storage 30 Type of tool holder Series 21i-MB Ptxy2y Media Power consumption 15 kVA Internal cooling Yes This Hyundai Kia Hi V50D Vertical Machining Center was manufactured in 2005 in Korea and has been operative for 29618 hours. It is operated through a FANUC Series 21i-MB Control unit, this ma... more


houfek bul...
daily

New machines via email!

Stay updated!

to

to

Edit search
HOUFEK BULDOG 5
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.