Deckel lks for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
13
Offer a lid LK/LKS here. The machine is in good condition. It was rebuilt and a Heidenhain digital display was installed. See pictures! She stood in the workshop for 30 years with an acquaintance. There is also a lot of accessories. Simply report if you have any questions. there are many more pictures available. S3w2th more
9
Used Jig Gringing Machine LKS DECKEL witch additional milling head. 2018 reconditioned. Complete rebuilded from machine body as you can see on photos. Excellent condition. Tested under power. Ready to delivery, installation and work. Complete offer on request. Bdkoe9mzmk more
13
DMG Deckel Maho HSC75 linear 250 ATC Mfd. 2009 5-Axis 28000 RPM 250 tools ATC HSK 63A taper Blum lasers for the tools an Heidenhain TS 649 part probes Rapid and cutting feed rate up to 3500 inch/minute High pressure thru spindle coolant and paper band filters Prepared for pallet changing, with pallet changer access door from behind Coqawzx Controls: Heidenhain 530 Never used 2 Machines Available more
10
Serial No. 2821-0523 Control Deckel Contour 3 Table Size 900 x 530 mm Table Load 800 kgs Table Left/Right X axis 560 mm Table Rise & Fall Z axis 390 mm Feed Rate 2 -3600 mm/min Speeds 40 - 4000 rpm Spindle Taper ST40 Spindle Rise & Fall 80 mm Head Tilts 45 - 0 - 45 degrees Ram In/Out Y axis 500 mm Fitted with tool clamping Length 8' Width 7' 6" Height 6' 8" Nett Weight Actual. 2,800 Kgs. / 2.76 Tons. Be9ug0et9p more
3
Heidenhain MillPlus NC-rotary table 700 mm x 500 mm Max. table load 350 kg movements: X: 750 mm Y: 600 mm Z: 530 mm Bfgyytmhcm B: 180° C: 360° rapid 50m/min spindle motor 25/35 kW torque 87/130 Nm Max. spindle speed 18.000 rpm SK-40 ATC 60 tools Coolant th. spindle Coolant system with high pressure pump and filtration Swarf conveyor more
7

5-axis machining center Deckel Maho DMC 60 U Hi-Dyn

Kaufungen, GermanyGermany
6559 km
2002
ready for operation (used)
5-axis universal machining center Manufacturer: Lid Maho Type: DMC 60 U Hi-Dyn Railway control Heidenhain TNC 430 Gxs87xd Built: 2002 ICZ (internal coolant supply) Form AD Technical data: Travel: X 600 Y 700 Z 600 Speed range: 0 - 18,000 rpm With the following accessories: Rotary pallet changer NC round table with pallet carrier 630 mm x 500 mm clamping surface 2fold pallet changer 2 pallets 630 x 500 mm Universal milling head with controlled B-axis SK 40 Tool c... more
6
Universal milling machine lid FP1 with 3 - axles - Active digital display TNC 113 Heidenhain and stepless feed Super ZUSTAND Technical data: Built 1986 Machine No. 2102-2927 Rigid angular table Speed: 40 - 2000 rpm Feed stepless in 3 axes - Rapid response in 3 axes Drive power .:1.5 / 1.9 KW Hjywu7a Spindle brake Travel X/Y/Z: 300/160/340 mm Vertical milling head can be moved to spindle buck 100mm Vertical pinole and horizontal pinole - SK40 Tightening system M16 Weight... more


deckel lks
daily

New machines via email!

Stay updated!
5
x-travel:600 mm y-travel:700 mm z-travel:600 mm turning speeds:18.000 1/min control:MILLPLUS iT V 600 HEIDENHAIN tool taper:BT 40 tool change unit:60 Pos. Y2mtpl NC-round-/swivelling table with palet changer:630 x 500 mm spindle drive:28/19 kW total power requirement:58 kVA weight of the machine ca.:13 t dimensions of the machine ca.:4,4 x 2,75 x 2,98 m 5-axis universal machining center with 2-pallet changer, controlled universal milling head (B-axis), internal coolant supply 40bar, 980 litre... more
6
NC rotary table with motor cover Built-in rotary table, extension table for universal tool Fäsmaschine fits DECKELTyp FP 42 NC Built approx. 1985 Table size 800 x 600 mm Keyway width 16 mm Groove spacing 90 mm motorized swivel 360° -Table Rotary actuator with DC servo motor -Hydraulic clamping Bdesgslxrv -Inclined bed stretching 45° -Manual fine adjustment by hand 0,01Teilstriche = 36 seconds -Degree of scaling at the round table -Limit switch cams for positioning or reference posit... more
4
Manufacturer: Lid Maho Type: DMU 70 Evolution Year of construction: 2002 Control: Heidenhain Mill Plus Equipment: 60 compartment tool changer, x-way 750 mm y-way 600 mm z-way 520 mm New spindle 2018 18000 rpm Machine is in very good condition Available from June 2019 Can be visited under electricity. 0nnpjr3y more
5

Universal machining center Deckel Maho DMU 80 T

Kaufungen, GermanyGermany
6559 km
2002
ready for operation (used)
Universal Machining Center Manufacturer: Lid Maho Type: DMU 80T Built: 2002 Control : Heidenhain iTNC 530 Production package - 40 bar (theor. pumping capacity) - Paper tape filter - rotating viewing window - Chip flushing in work room door - ICZ through spindle center Operating mode 4 "Process observation in production" Manual intervention for open workroom doors Release by completed checklist x-way 880 mm Fn20kcx y-way 630 mm z-way 630 mm Control iTNC 530 Main spindle:... more
3

Milling machines DECKEL FP4A

More Deckel Fp 4
Kaiserslautern, GermanyGermany dealership location
6526 km
1984
ready for operation (used)
Control Unit Brand Grundig Model Electronic Main Drive Spindle speed range 63 - 3150 rpm Workpiece Workpiece drm 80 mm Workpiece X 485 mm Workpiece Y 385 mm Workpiece Z 380 mm Workpiece weight 600 kg Table Distance between 63 mm Tools Type of tool holder SK 40 Nnh8b Additional Equipment External memory expansion Wiring diagram Spare parts diagram 1 set of collets for tool clamping Program memory expansion via external computer Operating instructions machine Operating instructions control P... more
5
x-travel:1800 mm y-travel:2000 mm z-travel:1100 mm pallet table size:1.600 x 1.400 mm table load capacity: kg tool taper:HSK 100 spindle drive:44/32 kW turning speed range - stepless:10.000 1/min numbers of positions in the tool changer:180 control:iTNC 530 HEIDENHAIN total connected load:86 kVA transport dimensions LxWxH:6,1 x 3,4 x 3,8 m Kdfvsdm space requirements approx. LxWxH: m weight of the machine ca.:37 t 5-axis CNC universal maching center, simultaneously, NC-rotary table with pall... more
4
x-travel:300 mm y-travel:150 mm z-travel:340 mm feed - longitudinal/cross:10 - 500 mm/min spindle turning speed range:40 - 2000 U/min table-size:600 x 210 mm tool taper:SK 40 total power requirement:1,0 / 1,4 kW Berw8kncbn weight of the machine ca.:0,6 t dimensions of the machine ca.:1,0 x 1,1 x 1,6 m more
3

Werkzeugfräsmaschine DECKEL FP 3 LB

More Deckel Fp 3
Bruchsal-Büchenau, GermanyGermany
6593 km
1976
excellent (used)
Werkzeugfräsmaschine Deckel FP 3 LB 07-07-239 Lieferzeit: sofort Nummer: 07-07-239 Hpn380l Maschinendaten Baujahr: ca. 1976 L x B x H: ca. 2000 x 1900 x 1900 mm Gewicht: ca. 2320 kg Sehr Guter Allgemeinzustand Technische Daten Digitalanzeige: 3 – Achsen – Digitalanzeige Verfahrwege: X – Achse: ca. 800 mm Y – Achse: ca. 300 mm Z – Achse: ca. 400 mm Tischaufspannfläche: ca. 1000 x 520 mm Spindel: Drehzahlbereich: ca. 40 – 2000 U/min Werkzeugaufnahme: I... more
6

vertical Milling Center Deckel-Maho DMC 835V

Heilbronn, GermanyGermany
6633 km
2006
ready for operation (used)
CNC control Heidenhain iTNC530 20-fold automatic tool changer electronical hand wheel chip tank coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 835 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1000x560 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 20-12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Eilgang / rapid feed 30 m/min Antriebsleistung Spindel 40%/100 ED /... more
3
1 used CNC milling machine Fabr. Lid Type FP 42 NC Control Dialog 4 C39sx0ea x-way:1170 mm y-way:500 mm z-way:370 mm Speed range:25 - 2500 rpm Tool holder:SK 40 Table area:1300 x 850 mm T-slots - width: mm Feed 2-3600 mm infinitely programmable Expressways - longitudinal/transverse/vertical:4000 mm/min Total power requirement:4 kW Machine weight approx.:4.0 t Room requirements approx.:2.2 x 2.1 x 2.3 m Facilities: electronic handwheel Ball roller spindles in all axes au... more
7

Machining centers (vertical) DECKEL FP4A

More Deckel Fp 4
Kaiserslautern, GermanyGermany dealership location
6526 km
1986
ready for operation (used)
General Data Vsqxje Measurements width 2000 mm Measurements depth 2700 mm Measurements height 2300 mm Machine weight 1850 kg Control Unit Brand DECKEL Model Contour 2 CNC main language German Main Drive Number of spindles 1 Spindle speed range 3150 Movement X-Axis Movement 485 mm Y-Axis Movement 385 mm Z-Axis Movement 380 mm Workpiece Workpiece weight 600 kg Table Outer length 800 mm Outer width 460 mm Number of tslots 7 Distance between 63 mm Tools Type of tool holder SK40 Media Main el... more
7

milling machining centers - universal DECKEL-MAHO DMU 60 P

Mülheim an der Ruhr, GermanyGermany dealership location
6382 km
1999
used
travel -x axis 600 mm travel -y axis 700 mm travel -z axis 600 mm Control Heidenhain - Millplus spindle hours ca. 28.000 h turning speed range - stepless 0 - 8.000 U/min Automatic tool changer 30 Stk. Beos8oml73 tool adaptor SK40 5-axis simultaneous machining center equipped with ITC & chip conveyor. more
4
CNC Control Dialog 112 Table size 900 x 550 mm. Movement x-Axis 700 mm. y-Axis 630 mm. Ewawrmp z-Axis 480 mm. Number of tools in magazine 30 pieces. Maximum spindle speed 1-8.000 1/min. Tool taper SK 40. more
10
WERKZEUGFRÄSMASCHINE DECKEL FP 3 GS *TEILÜBERHOLT* - 07-07-233 Lieferzeit: Auf Anfrage Nummer: 07-07-233 Hersteller: Deckel Typ: FP 3 GS *Teilüberholt* MASCHINENDATEN Baujahr: ca. 1978 L x B x H: ca. 2000 x 1600 x 1900 mm Gewicht: ca. 1500 kg Sehr guter Allgemeinzustand - Teilüberholt (Klicken Sie auf Teilüberholt um den Umfang der Überholung sehen zu können) TECHNISCHE DATEN Ptz7qu Digitalanzeige: 3 - Achsen - Digitalanzeige NEU Verfahrwege: X - Achse: ca. 500 mm Y ... more
5
x-travel:400 mm y-travel:400 mm z-travel:375 mm turning speeds:18.000 1/min tool taper:HSK 63 control:HEIDENHAIN iTNC 530 HCSI tool change unit:30 pos. Pv9vhde table surface area:450 x 400 mm rapid traverse:80 m/min spindle:35 / 25 kW total power requirement:49 kVA weight of the machine ca.:6,9 t dimensions of the machine ca.: m 5- axis machine with round-swivelling table -5° to +110°, C-axis 360°, dynamic package with rpid feed 80m/min, direct measuring system, internal coolant supply 40bar... more
4
1 Universal Machining Center Manufacturer: Lid Maho Type: DMC 104 V Built: 2003 Control: Heidenhain iTNC 530 Technical data: Travel: X-axis: 1040mm Y-axis: 600mm Z-axis: 500mm Spindle: Zvgkhixp Speeds: up to 12,000 rpm Outdoor cooling and blowing air through spindle center equipped with: - direct path measuring system - Chip conveyor - Rinsing gun - Electr. Handwheel - Operating mode 4 more
6
Universal milling machine lid FP3 with 3 - Axle digital display from Heidenhain stepless feed Civ3urp3 Technical data: Built 1978 Machine No. 2201-4385 3 axes digital display Heidenhain • Rigid angular table (redesigned) Speed: 40 - 2500 rpm Stepless feed and rapid response in 3 axes Drive power .:3 KW Travel X/Y/Z: 500/300/400 mm Equipment: Vertical & Horizontal Spindle Vertical pinole and horizontal pinole extendable - SK40 Tightening system S20x2 Weight approx. 1400 Kg ... more
8
travel -x axis 710 mm travel -y axis 520 mm travel -z axis 520 mm Control Heidenhain - Millplus weight of the machine ca. 7,5 t 5-axis simultaneous machining center WORKING AREA -CUBIC- - Number of machining axes (without parallel axes) 5 - 5 simultaneous CNC axes - Travel X-axis 710 mm - Travel Y-axis 520 mm - Travel Z-axis 520 mm TABLE - clamping surface diameter 700 mm - Workpiece weight (max) 310 kg - Positionability 360 ° - Positionability 180 ° MILLING SPINDLE / HEAD - Spindle type:... more
5
x-travel:400 mm y-travel:200 mm z-travel:400 mm No. of spindle turning rate:18 speeds:40 - 2000 U/min Beqoe9pair table surface area:730 x 240 mm flute distance:4 / 12 mm number of feeds:18 feed range:8 - 400 mm/min rapid traverse:1200 mm/min total power requirement:2,2 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:1,7 x 1,4 x 1,7 m more
3

Werkzeugfräsmaschine Deckel FP 1

More Deckel Fp 1
Bruchsal-Büchenau, GermanyGermany
6593 km
1987
excellent (used)
Werkzeugfräsmaschine Deckel FP1 07-07-113 Lieferzeit: sofort Nummer: 07-07-113 Bfgamcuyur Maschinendaten Baujahr: ca. 1987 L x B x H: ca. 1600 x 1200 x 1700 mm Gewicht: ca. 650 kg Guter Allgemeinzustand Technische Daten Digitalanzeige: 3 – Achsen – Digitalanzeige *optional* Verfahrwege: X – Achse: ca. 300 mm Y – Achse: ca. 150 mm Z – Achse: ca. 340 mm Tischaufspannfläche: ca. 600 x 250 mm Spindel: Drehzahlbereich: ca. 40 – 2000 U/min Werkzeugaufnahme... more
6
Univ. Pan tilting rotary table cover fits FP 2 L or FP 3 L or FP 4 L Nr. 2314-0301 year: circa 1975 Clamping surface: 1000 x 520 mm -6 clamping slots 16 mm, gap 90 mm -Mounting plate horizontally to the right and left scales can be rotated by 45 degrees -by / the machine tilting +/-15 degrees -Swivel +/-15 degrees permissible load of up to 1000kg Weight: 400kg Bd9g39sww2 good condition more
12

Machining centers (vertical) DECKEL MAHO DMC 635V

Kaiserslautern, GermanyGermany dealership location
6526 km
2012
ready for operation (used)
General Data Measurements width 3640 mm Measurements depth 3480 mm Measurements height 2665 mm Machine weight 4000 kg Control Unit Brand DMG Model Heidenhain iTNC 530 Main Drive Number of spindles 1 Spindle speed range 18000 Movement X-Axis Movement 635 mm Y-Axis Movement 510 mm Z-Axis Movement 460 mm Workpiece Workpiece weight 600 kg Table Outer length 790 mm Outer width 560 mm Tools Slots in storage 30 Zhhsuxmu Max weight 6 kg Max tool diameter 80mm (130mm); at 18000rpm max 200mm length... more
9

Milling Machining Centers 5 Axis DECKEL MAHO DMU 70 evo

Großhansdorf, GermanyGermany dealership location
6490 km
2007
used
x-travel 750 mm y-travel 600 mm z-travel 520 mm Control Heidenhain MillPlus iT Number of working hours 65000 h spindle hours 26000 h main spindle: turning speed range - main spindle 20 - 18000 min/-1 drive capacity - main spindle 25/35 kW rotary table: table surface area 700 x 500 mm x mm tool changer: Bfgmpz8qbg tool taper SK 40 number of tool places 32 Pos. rotating range c-Achse 360/0,001 ° Tilting area b-Achse 0-180/0,001 ° rapid travel x/y/z 50 mm/min total power requirement kW we... more
9

milling machining centers - universal DECKEL-MAHO DMU 50 Evolution

Mülheim an der Ruhr, GermanyGermany dealership location
6382 km
2000
used
travel -x axis 500 mm travel -y axis 380 mm travel -z axis 380 mm Control Heidenhain - Millplus Beos72kav0 tool adaptor SK40 rapid traverse x/y/z 30.000 mm / min surface area 500 x 380 mm weight of the machine ca. 6 t 5-axis simultaneous machining center equipped with ITC & chip conveyor. more
5
x-travel:1250 mm y-travel:880 mm z-travel:800 mm turning speeds:18.000 1/min taper ISO:SK 40 tool change unit:30 control:HEIDENHAIN TNC 430 table load:2 t spindle:15 / 10 kW X9hn0so max. torque on the spindle:130 / 87 total power requirement: kVA weight of the machine ca.:12,5 t dimensions of the machine ca.:7,2 x 5,7 x 3,2 m dimensions for transport:4,6 x 3,3 x 3 m 5-face universal machining center, with NC-rotary-table dia. 1.250 x 1.000mm, horizontal / vertical milling head, 3D-touchpro... more
4
WERKZEUGFRÄSMASCHINE DECKEL FP 1 AKTIV - 07-07-160 Lieferzeit: sofort Nummer: 07-07-160 Hersteller: Deckel Typ: FP 1 Aktiv MASCHINENDATEN Baujahr: ca. 1987 L x B x H: ca. 1600 x 1200 x 1700 mm Gewicht: ca. 650 kg Guter Allgemeinzustand TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige (Heidenhain TNC 113) Verfahrwege: X - Achse: ca. 300 mm Y - Achse: ca. 150 mm Z - Achse: ca. 340 mm Tischaufspannfläche: ca. 600 x 250 mm Spindel: Drehzahlbereich: ca. ... more
6
CNC tool machine lid type FP 4 CC Masch. No. 28070060202 (enclosure No. 20287) built in 1987 HEIDENHAIN TNC 355 CNC path control N20nfi2h Routes x 600 mm, Y: 500 mm, w: 500 mm Table size 900 x 520 mm Pinolhub 80 mm ISO 40 spindle adaptor Spindle speed of 0 up to 6000 RPM infinitely variable 2 to 4000 mm/min stepless speed Rapid traverse speed 4000 mm / min Main spindle drive 6 kW Power supply 380 v, 50 Hz -Control HEIDENHAIN TNC 355 with Handwheel -Pinolverschiebung on the vertical... more
5
x-travel:1170 mm y-travel:500 mm z-travel:370 mm control:Dialog 1 turning speed range:31 - 3150 U/min tool taper:SK 40 table surface area:1300 x 850 mm Ltryhcsx T-slot - width: mm rapid motion -longitudinal/cross/vertical:4000 mm/min total power requirement:4 kW weight of the machine ca.:4,0 t dimensions of the machine ca.:2,2 x 2,1 x 2,3 m more
6

Milling machine Deckel FP4M

More Deckel Fp 4
Ubstadt-Weiher, GermanyGermany
6595 km
1987
excellent (used)
Universal milling machine lid FP4M with 3 - Axle digital display Heidenhain in TOP condition !!! Technical data: Built 1987 Machine No. 2203-2928 • Rigid angular table (redesigned) Speed: 50 - 2500 rpm Feed: 8 - 630 mm/min Drive power .:3.7 / 4.4 KW Zfrup7c9 Spindle brake Rapid speed 1300 mm/min Travel X/Y/Z: 500/400/400 mm Vertical milling head can be moved to spindle buck 150mm Vertical pinole and horizontal pinole - SK40 Vertical pinole 90mm extendable Tightening sy... more
7
The machine comes from a fine operation from the 1st hand. Control: Heidenhain TNC 426 PB Bfelgl03kd Trajectories: X-axis-700 mm, Y-axis-550 mm, Z-axis-500 mm Reprimor: 10000 mm/min, Eilgang X-Y: 30000 mm/min, Z: 20000 mm/min Spindle speed: 15000 dumm min Spindle intake: SK40 (A4 69871) Spindle power: 10kW/15kW Tool magazine: 30 places Table size: 900 x 550 mm, load 800 kg Late conveyors. The linear tours of the X axis were swapped. In the Y axis, the guide running cars have ch... more
5

Machining Center - Universal DECKEL DMU 60 evo

Karlsbad, GermanyGermany dealership location
6602 km
2011
used
x-travel:600 mm y-travel:500 mm z-travel:500 mm turning speeds:18.000 1/min tool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:30 pos. table surface area:600 x 500 mm table load:400 kg spindle: kW total power requirement:45 kVA weight of the machine ca.:10 t dimensions of the machine ca.:3,5 x 2,97 x 2,8 m Nmozb 5- axis simultaneously machining center, with round-swivelling table -5° to +110°, C-axis 360°, chipconveyor, 3D-touch probe, flush gun, internal coolant supply 40bar,600 ... more
3
WERKZEUGFRÄSMASCHINE DECKEL FP 1 AKTIV - DIGITAL - 07-07-234 Lieferzeit: sofort Nummer: 07-07-234 Hersteller: Deckel Typ: FP 1 Aktiv - Digital MASCHINENDATEN Baujahr: ca. 1987 L x B x H: ca. 1600 x 1200 x 1700 mm Gewicht: ca. 650 kg Guter Allgemeinzustand TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige (Heidenhain TNC 113) Verfahrwege: X - Achse: ca. 300 mm Y - Achse: ca. 150 mm Z - Achse: ca. 340 mm Tischaufspannfläche: ca. 600 x 250 mm Spindel: D... more
12
Technical data: Brand: Lid Type: FP 4 Control: Contour 2 Bffjminwdm Y.O.M.: 1985 Travel X / Y / Z: 485 / 385 / 380 mm Speeds: from 63 - 3,150 rpm Feed: 2 - 1,000 mm/min infinitely adjustable Rapid response: 3,000 mm/min Tool holder SK40 more
4
x-travel:485 mm y-travel:385 mm z-travel:380 mm speeds:63 - 3150 U/min feed:stufenlos 2 - 3.000 mm/min rapid traverse:3.000 mm/min Bczl7ax39n tool taper:SK 40 total power requirement:4,4 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:2,8 x 2,8 x 1,9 m quill stroke:80 mm more
6
Universal milling machine lid FP1 with 3 - Axle digital display K&C stepless feed in light grey TOP condition Technical data: Built 1978 Machine No. 2101-0353 Rigid angular table (redesigned) 2ri3g3 Speed: 40 - 2000 rpm Feed stepless 2 axes Drive power .:1.5 / 1.9 KW Spindle brake - Rush Travel X/Y/Z: 300/160/340 mm Vertical milling head can be moved to spindle buck 100mm Vertical pinole and horizontal pinole - SK40 Tightening system S20x2 Weight approx. 700 Kg Acc... more
7
The machine comes from a precision operation from 1st hand. Control : Heidenhain TNC 426 PB + electr. Handwheel Travel: X-axis - 700 mm, Y-axis - 550 mm, Z-axis - 500 mm Feed: 10000 mm/min,rapid x-Y: 30000 mm/min,Z: 20000 mm/min Bfelgcjwwc Spindle speed: 15000 rpm Spindle holder : SK40 (DIN 69871) Spindle power: 10kW/15kW Tool magazine: 30 seats Table size: 900 x 550 mm ,load 800 kg Chip conveyor . The linear guides of the X axis were replaced. In the Y axle, the guide trolleys... more
13
Technical parameters: Fixed work table size: 1250 x 700 mm  - T-groove distance: 63 mm NC desk-mounted circular table:  - clamping surface: 700x1250mm / Diameter: 800 mm Table top torque Md:  - at 100%: 2443 Nm  - at 60%: 3004 Nm Be9bqv3yuy  - at 40%: 3682 Nm  - at 25%: 4377 Nm Main drive speed: 30,000 / min Travel Path:  - X-axis: basic machines (3 axis): 980 mm      with B axis (5 axis): 880 mm  - Y-axis: 630 mm  - Z-axis: 630 mm Workbench Loads Allowed:  - fixed ... more
5
WERKZEUGFRÄSMASCHINE DECKEL FP 2 *TEILÜBERHOLT* - 07-07-112 Lieferzeit: Auf Anfrage Nummer: 07-07-112 Hersteller: Deckel Typ: FP 2 *Teilüberholt* MASCHINENDATEN Baujahr: ca. 1978 L x B x H: ca. 2000 x 1500 x 1800 mm Gewicht: ca. 800 kg Sehr guter Allgemeinzustand - Teilüberholt (Klicken Sie auf Teilüberholt um den Umfang der Überholung sehen zu können) TECHNISCHE DATEN Digitalanzeige: 3 - Achsen - Digitalanzeige NEU Verfahrwege: X - Achse: ca. 400 mm Y - Achse: ca. 20... more
8

milling machining centers - vertical DECKEL-MAHO DMF 300 linear

Mülheim an der Ruhr, GermanyGermany dealership location
6382 km
2001
used
travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 710 mm Control Siemens - 840 D tool adaptor SK40 Automatic tool changer 30 Stk. Cepzdnz0 4-axis machining center Additional equipment: + reinforced ICZ + [...] The machine is in a good condition. more


deckel lks
daily

New machines via email!

Stay updated!

to

to

Edit search
DECKEL LKS
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.