The SICAR CL2NRT wide-belt sander
Location
Gorzów Wlkp.
Conditions of delivery
Cost of delivery
to be agreed
Start type
to be agreed
Description
9bw7dkw
Comments
dwywałowa with a boot
one motor feeds two shafts
Serial No. 67894
Belt width 75mm
Table size 75mm
Input 400/3/50hz
Bpz9cccxtl
Belt speed 30 / 34 m/sec
RPM 3000/3400
Length 1000mm
Width 400mm
Height 950mm
Nett weight approx. 80 kgs
Elevator belt , Make BCK Holland, Type C125, . 134463-010, Material Stainless steel, Belt width 320mm, Belt length 3000mm, With carriers , Carrier height 30mm, Hart distance carriers 150mm, With side guides , With motor 0,25 kW 230-400 Volt, Outlet height 750mm, Year of construction 2013, Mounted on frame , Mounted on wheels , With switch , Floorspace 3,2x1,2 M, Total height 1,5 M, Weight 230 Kg, CE , Extra Specifications inlet dia. 225mm outlet dia 250mm What you can expect from Foeth: all our ...
Alup
SCK 31-10
Bncodsjle7
Screw compressor
Fully automatic, internally completely piped and wired compact system, single-stage, oil-injected, compressing, air-cooled, soundproofed.
Motor power: 75kW
Final pressure: 10bar
Delivery rate: 9.70m³ / min
Screw compressor in technically and optically perfect condition
The engine was newly stored.
Hoses and great service new.
Operating hours: 19016
Load hours: 17016
Year of construction: 2009
Tape package consisting of: - Infeed belt TS.L - Emergency delivery TS.ZM - Roller conveyor TS.RL - Telescopic belt TS.T - Switch cabinet TS.EV - Infeed belt TS.L - Infeed belt TS.L
Bhntescapc
Waste removal conveyor
Ebeh7kjj
L- belt MFP / Toro 1700x1600x 245 mm, year: 2012, price: 2.450 €, contact: Mr. Rainer Eckerle
Bp9e0stals
Serial No. 394
Capacity 2000mm x 150mm
Table size 1950mm x 780mm
Fwd9kkqd
Table rise & fall 1000mm
Input 415/3/50hz
Speeds 900 - 2800 rpm
Length 2900mm
Width 1400mm
Height 1750mm
Nett weight actual 400 kgs
Motor 0,75 kW 220-240/380-420 Volt and 0,37kW 220-240/380-420 Volt, Make Dewaco Ltd (FI), Type FPD-16 Belt Filter Press, No. 01-965, Year of construction 2010, Material Stainless steel, Band speed variabel, Belt width 1600mm, With fluid resevoir , With switch on the gearbox, Floorspace 3,5x2,4 M, Total height 2,6 M, Weight 3400 KG, CE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w...
Description: The suspension (slurry) gets
via a feed box to the drain bed where the suspension releases water by gravity filtration. The sludge cake is restacked by built-in weirs so that the water can run off on the surface of the sludge cake. The built-in baffles (baffles) tear open the resulting sludge layer, so that permanently free screen belt surfaces are created, allowing water released by flocculation to flow off quickly. Dewatered sludge is removed from the Drain Belt by a scraper and c...
ID000540Belt conveyor - manufacturer Mocklen AB,- length 5,80 m,- width 1,25 m,- total height 1.65 m,- electric veyor is in good you need more information about the equipment, please contact our l for best price
B3mqrtee
Screw compressor ALMIG BELT XP 8 D- 10 bar (air cooled)
include dryer
Year 2020 / IMMEDIATELY AVAILABLE!
Technical specifications
Type: BELT XP 8 D
Operating pressure: 10 bar (ue)
Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min
Degree of protection / insulation class drive motor: IP 55 / ISO F
Rated power drive motor: 7,5 kW
Operating voltage / frequency: 400/50 V / Hz
Sound pressure level (DIN 45635 T.13): 63 dB (A)
Length: 1200 mm
Width: 670 mm
Height: 1100 mm
Weight: 315 kg
...
Plockmatic 104 Square Fold + conveyor belt
Guukkvr
As an experienced retailer of second hand copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt.
We ship copiers coming from, and maintained by Konica Minolta France.
Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request.
Z-conveyor belt Rau 700x1400x400 310 mm , 380 V
year: 2003
price: 3.150 €
contact: Mr. Rainer Eckerle
Bmevxnjvfi
Make Imtech Drygenic (NL), Type Ventilex , No. V135005, Year of construction 2013, Material Stainless steel 1.4404 (316L), With switch , With swithgear , Weight 12000 KG, CE , Extra Specifications Imtech Ventilex drying plant includes a belt dryer with 2 fans and heat exchanger integrated into a 40 foot container. Product inlet distributor with feed belt and swing function. Air supply cabinet with filter unit, fan, heat exchanger for heat recovery, flue gas condenser, heat exchanger for after h...
The compressor is very good condition, maintained and like new. Working hours have only 3156 hours. During the maintenance has been changed v-belts, oil, oil filter, and air filter. Previously the compressor was used in the factory only to perform an increasingly certain work process, which also resulted in low working hours.
- Model with a larger screw element.
- Simple construction and reliable Germany compressor.
- Possible to change the compressor's maximum working pressure up to 14 Bar.
- ...
ID000590Belt conveyor with metal detectorManufactured: Sweden,Manufacturer:Hedlund,Length: 8900 mm,Belt width: 600 mm,Total width: 1650 mmHighest point: 800 mm,Electric motor: 2.2 kW,Description:Metal detector ABB, previously used a bark you need more information about the equipment, please contact our l for best price
Bjbsdjrzhb
used screw compressor
ALMIG BELT 11 (10 bar)
with Air Control Basic
very good condition
Operating hours: only 531 hours
Year: 2017
Bhlzd3ewum
Technical specifications
Type: BELT 11 (10 bar)
Operating pressure: 10 bar
Delivery quantity at 10 bar (g): 1,50 m³ / min
Nominal power drive motor: 11 kW
Protection class / insulation class drive motor: IP 55 / H
Operating voltage / frequency: 400/50/3 V / Hz / ~
Sound pressure level (DIN 45635 T.13): 69 DB (A)
Compressed air connection: G 1"
Length: ...
sorting belt
length 11000mm
width 1500mm
drive 4 kw
available part of a sorting line:
sorting belt 1500x 11000
extraction belt 800x 8000
Ysilxc
magnet belt 1000x 1200
platform 2200x 11000
electric switch cabinet 2 frequency converters
Z-conveyor belt Rau 1000x1400x400 310 mm breit, 380 V
Puqx9u
year: 2004, price: 3.350 €, contact: Mr. Rainer Eckerle
Make Zhejiang Shuangzi Industry Machining, Type SUNZDG-04-30, With swithgear , Total height 2.7m, CE , Extra Specifications , Extra information Heat exchange area 30m2 Water evaporation capacity 15-25 Kg/H Beltwidth 1155mm er 110 KW, 380 Volt, 50 Hz Diameter 1700mm, length 9800mm, height 2700mm General Drying device that is intented for liquid and paste like materials. This vacuum drying equipment is capable of continuously feeding and discharging these liquids and pastes by employing a powerful...
The material dosing hopper serves to transport the material in concrete mixer, based on the time base.
Adjusting the time base is made for each material separately, if you have hoppers with two belt conveyers.
The bunker/hopper has its own independent electric control.
High quality product with components made in EU.
Warranty 12 month.
Bqwnlp2
ID000519Belt conveyorManufacturer: Mocklen AB,Length: 8 m,Width: 650 mm,Capacity: 50 t/h,Electric motor: 2,2 you need more information about the equipment, please contact our l for best price
D3sghz89
Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled)
Year 2019 / IMMEDIATELY AVAILABLE!
Technical specifications
Type: BELT XP 8
Operating pressure: 10 bar (ue)
Delivery quantity, according to ISO 1217 Annex C: 0.99 m³ / min
Degree of protection / insulation class drive motor: IP 55 / ISO F
Rated power drive motor: 7,5 kW
Operating voltage / frequency: 400/50 V / Hz
2rj37y
Sound pressure level (DIN 45635 T.13): 63 dB (A)
Length: 800 mm
Width: 670 mm
Height: 1100 mm
Weight: 274,5 kg
Compresse...
power:75kW
volume flow:11,86m3min
pressure:8 bar
Blhixevupy
year:2008
Z-conveyor belt Rau 1500x1400x500 310 mm , 380 V
year: 2006, price: 3.450 €, contact: Mr. Rainer Eckerle
Bl9wmrewkt
Cooling belt , Make NEUERO Farm und Fördertechnik GmbH (DE), Type NBT, Year of construction (Unknow, manufacturing tag is missing), Material Mild steel, Belt width 2000mm, Belt length 11000mm, With motor +/- 2,2 KW, Feeding with roll /band, motor +/- 1,5 KW, With scraper (3x) , With motor 0,75 KW, Outlet 200x300mm, Screwfeeder, motor 1,3 KW, 400 Volt , Mounted on frame in 40ft. container, With switchgear , Floorspace 16,5x4,0 M, Extra Specifications Including fan and centrifugal dust separator, ...
ID000698Belt conveyorManufacturer: GVC,Length: 7,40 m,Width: 1,80 m,Height: 900mm, Electric motor: 3 kW,Belt width: 800 you need more information about the equipment, please contact our manager.
Jv87am
Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled)
Year 2019 / IMMEDIATELY AVAILABLE!
Warranty: 60 months (upon completion ALMiG AIRCARE)
Technical specifications
Type: BELT XP 11
Bdpnmjduwt
Operating pressure: 10 bar (ue)
Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min
Degree of protection / insulation class drive motor: IP 55 / ISO F
Rated power drive motor: 11 kW
Operating voltage / frequency: 400/50 V / Hz
Sound pressure level (DIN 45635 T.13): 66 dB (A)
Length: 800 mm...
conveyor belt horizontal WITTMANN 5.400 x 400mm, year: 2010, price: 1.950 €, contact: Mr. Rainer Eckerle
8g3m2j2ky
Make Donati srl Calcio (IT), Type PVC/R2, . NTP 700/523, Material Mild steel, Belt material Plastic, Elevator belt , Belt width 500mm, Belt length 10500mm, With motor 1,5 KW, 220/380 Volt, Floorspace 11x0,6 M, Weight 900 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more...
Belt conveyorLength: 11 m Belt width: 400 mmElectric motor 2,2 kWIf you need more information about the equipment, please contact our manager.
Cxg09o8e
used screw compressor ALMIG BELT 45 with 9 bar
air cooled
Control: Aircontrol 1
Bj. 2013 / AVAILABLE NOW!
Operating hours: 20,940 Bh (last service on 02/27/2020 at
20340 Bh by ALMIG factory customer service)
G3vodzlwi
Technical specifications
Type: BELT 45
Operating pressure: 9 bar (ue)
Delivery quantity, according to ISO 1217 Appendix C: 7.50 m³ / min
Degree of protection / insulation class drive motor: IP 55 / F.
Rated power drive motor: 45 kW
Operating voltage / frequency: 400/50 V / Hz
Sou...
L-conveyor belt 5.800 x 1.200 x 600mm broad, 380 V, year: 2010, price: 3.700 €, contact: Mr. Rainer Eckerle
Xxjw28svt
Make Donati srl Calcio (IT), Type PVC/R2, . NTP 700/520, Material Mild steel, Belt material Plastic, Elevator belt , Belt width 530mm, Belt length 6000mm, With carriers , Carrier height 50mm, With side guides /brushes, With motor 1,5 KW, 220/380 Volt, Mounted on frame , Floorspace 7,0x1,2 M, Weight 640 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to i...
ID000697Belt conveyorManufacturer: Mocklen,Length: 7,40 m,Width: 1,20 m,Height: 900mm, Electric motor: 3 kW,Belt width: 640 you need more information about the equipment, please contact our manager.
Bnvz0bh2uj
used Screw compressor ALMIG BELT 22 - 8 bar
MADE IN GERMANY
Year of construction: 2018
Hours: 9
Bcqyzw2tik
technical spezifications:
type: BELT 22
Maximum operating pressure: 8 bar
Delivery quantity at 10 bar : 3,54 m³/min
Installed power: 22 kW
Protection class / Insulation class Drive motor: IP 55 / F
Operating voltage / frequency: 400/50 V / Hz
Sound pressure level (DIN 45635 T13) : 71 dB (A)
Compressed air connection: G 1"
Dimensions and weight
Length : 1270 mm
Width : 890 mm
Height : 11...
L-conveyor belt TRIO 3.500 x 2.000 x 260mm broad, 380 V, year: 2011, price: 2.550 €, contact: Mr. Rainer Eckerle
2p8ufi
Cooling belt Material 1.4313 (Nicro 31), Make Gebrüder Kaiser (DE), Type FG 0,8 x 2,8, No. 34989, Year of construction 1999 / 1990, Material Stainless steel 1.4313, Mild steel, Stainless steel 1.4301 (304), Belt width 800mm, Belt length 2800mm (total 8113mm), With motor 0,75 KW, 380 Volt (Ex.), Belt speed 3-18 m/min, Belt can be cooled (water), With variable speed drive , With scraper , Outlet product dia.150mm, Inlet product dia.50mm, Mounted on frame , Floorspace 4,0x1,2 M, Total height 2,7 M,...
ID000696Belt conveyorManufacturer: Mocklen,Length: 7,40 m,Width: 1,80 m,Height: 900mm, Electric motor: 3 kW,Belt width: 700 you need more information about the equipment, please contact our manager.
Gtva0cyg
Screw compressor ALMIG BELT XP 30 - 10 bar (air cooled)
Year 2018 / IMMEDIATELY AVAILABLE!
Warranty: 60 months (upon completion ALMiG AIRCARE)
Technical specifications
Type: BELT XP 30
Operating pressure: 10 bar (ue)
Delivery quantity, according to ISO 1217 Annex C: 4,50 m³ / min
Degree of protection / insulation class drive motor: IP 55 / ISO F
Rated power drive motor: 30 kW
Operating voltage / frequency: 400/50 V / Hz
Sound pressure level (DIN 45635 T.13): 73 dB (A)
Length: 1350 mm
Width: 94...
Z-conveyor belt Rau 1300x2200x2000 400 mm, 380 V, year: 2000, price: 3.750 €, contact: Mr. Rainer Eckerle
Djkoapb
Vacuum belt filter , Make Eimco / Larox Pannevis bv, Type WL 10, No. 145.011, Year of construction 2005 (1986), Material Mild steel, Filter surface +/- 8.15m2, Filter width 1500mm, With motor 7,5 KW, 220/380 Volt, With variable speed drive , Knife discharge , With vacuum pump Nash 2bel303, Motor , With vacuum tank , With switch , Floorspace +/-12,0x2,5 M , Weight +/- 12.000 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They ...
EST000001Belt conveyorLength - 17 m,Belt width - 500 mm, Electric motor and you need more information about the equipment, please contact our manager.1500.00 EUR
Cfsqujb
L-conveyor belt Schuma 1000x1250x 600 mm, year: 2012, price: 2.750 €, contact: Mr. Rainer Eckerle
Gvth2k
Vacuum belt filter , Make Pannevis solid liquid separation, Type RT, F1, No. 1411, Year of construction 1988, Material Stainless steel, Product contact material Stainless steel 1.4571 (316Ti), Filter surface 4m2, Filter width 960mm, Filter length 4200mm, Number of sections: 2, With motor 0,25 KW, 380 Volt (Ex), With variable speed drive , Knife discharge , With liquid pump , Motor 0,75 KW (Ex), Floorspace 7,8x2,6 M, Total height 2,0 M, Weight 2700 KG, Extra Specifications Including 2x vacuum tan...
ID000728Cross conveyor with belt conveyor for board spacerLength: 7,10 mWidth: 1,95 mElectric motor (belt conveyor): 1,5 kWIf you need more information about the equipment, please contact our manager.
Bov92wv0is
Heilbronn, Germany
(dealership location)
7997 km