Used Helmerding E 25 for sale (78,197)

Condition: used, Year of construction: 1976, pressure 025 t Lodpey Nd Spofx Ahbohg table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Lhedpfx Ahsyath Tsbeg Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Ledpfxet Sgrus Ahbohg Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,098 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery manufacturer: Baden Batterie, remaining battery capacity: 70 %, battery voltage: 80 V, fork length: 1,010 mm, color: red, Equipment: UVV, lighting, sideshift, Description & special equipment: Incl. charger, good tyres, very good battery with 70% capacity, sideshift, half-cab (ideal for outdoor use), front windscreen, work lights, 3 valves. Ljdpfoyzy Ecjx Ahbohg Remark: The forklift is in very good condition. The machine is currently located at our site in Bad Krozingen. For an additional charge, transportation of the machine to your location can be arranged. An invoice with VAT shown will be sent to the buyer and the stated prices are net.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Lhodpfx Aedzqmzohbsg Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Ledpfx Ahjw Sp Dbebshg Technical condition: New Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm Lhodpfx Asvh Naqehbog turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Year of construction: 1994, operating hours: 62,283 h, bar diameter (max.): 26 mm, spindle bore: 230 mm, total width: 1,500 mm, total length: 7,000 mm, total height: 2,000 mm, INDEX MS 25E Maximum bar diameter round / square: 26 / 18 mm Spindle circle diameter: 230 mm Max. bar length: 100 mm Longitudinal slide travel (total / working / adjustment): 85 / 50 / 330 mm Cross slide travel (total / working / adjustment): 36 / 16 / 20 mm Spindle speeds (12 / 24 steps with 1.25 / 1.12): 366 – 5,020 rpm Main drive: 15 kW / 1,450 rpm Voltage: 400 V / 50 Hz Operating hours: 62,283 h Working hours: 4,916 h Dimensions (incl. bar guide): approx. L x W x H 7 x 1.5 x 2 m Weight: approx. 6 t Scope of delivery: INDEX MS 25E machine Lhsdpfx Aheymdchjbeg

Condition: new, - Working width 1020 mm - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual Ledpfecca Rgox Ahbjhg

Condition: like new (used), Year of construction: 2020, operating hours: 1,312 h, load capacity: 2,500 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, Manufacturer + model: LINDE E 25 L - 387 / 01 * EX * Miretti 3GD / Zone 2 & 22 Mast: 3F4760 ID: 25061.4742 Category: Used Mast: 3F4760 Lowered height: 2160 mm Lifting height: 4760 mm Capacity: 2500 kg Year: 2020 Hours: 1312 hours Capacity: 80 V / 625 Ah Lhedpfx Ahsy Itg Tebjg Options: CONTAINER specs!! * EX * MIRETTI!!!!! System = Miretti ATEX - 00101 Ref = E11138 Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp. class = T3 Gc Type = Cat 3D (approved for ZONE 22 - Dust) Gas group = IIIB Temp. class = T200°C Dc Equipped with: - FULL cabin - Complete street lighting - Joystick control forward/reverse - Spreader / S.s. - Sunshade for windscreen & roof - LED spotlight - Triplex FFL mast - Flashing beacon - Completely new tires all around (with ATEX specs) LIKE NEW condition!!!!

Condition: new, Year of construction: 2024, operating hours: 11 h, lifting height: 7,410 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), total height: 3,120 mm, total length: 2,400 mm, total width: 1,180 mm, color: other, Year of manufacture: 2024 Empty weight: 5.067 kg Lifting capacity: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Freelift - Side shift Lhjdpfjwvfldsx Ahbeg - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Integrated forkpositioner & side shift

Condition: used, functionality: fully functional, machine/vehicle number: H2X387H05214, Year of construction: 2017, operating hours: 11,564 h, load capacity: 2,500 kg, lifting height: 3,765 mm, free lift: 1,694 mm, fuel type: electric, mast type: duplex, construction height: 2,474 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387H05214 Load center: 600 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Super elastic Ljdpfx Asydr U Hshbehg Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 700Ah Battery type: PzS Battery year: 2018 Battery condition: 60 - 80% Description: Full cabin including heating; duplex mast; carriage with side shift; vehicle lighting; BlueSpot front and rear; warning beacon, RFID access control. Workshop-inspected with UVV approval. Side shifter, third hydraulic valve, heater, road registration (StVZO), full cabin, CE certificate, interior mirror, rotating beacon, heated full cabin, vehicle lighting, warning beacon, BlueSpot front and rear, RFID access control, wide-angle mirror.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides Lhjdpev Raatsfx Ahbsg - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,560 h, load capacity: 2,500 kg, lifting height: 4,460 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,070 mm, fork length: 1,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 80V Battery Ah: 500Ah Battery year of manufacture: 2015 Description: Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin, LED, Ledpfx Ahjtzg D Aebehg Radio

Condition: used, Manufacturer: Grenier - Charvet Model: E 25 Ljdpfxsx R Azxj Ahbjhg Type : High viscosity paste mixer   Motor power : 25 CV - 18 KW Speed variation: mechanical Previous use : Painting Agitation tool: approx. Ø 800 mm butterfly / cloverleaf type Vessel clamping: pneumatic Vertical movement: hydraulic unit

Condition: excellent (used), Year of construction: 2024, operating hours: 369 h, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, total height: 2,200 mm, total length: 2,400 mm, total width: 1,160 mm, color: other, Year of manufacture: 2024 Empty weight: 5.355 kg Lifting capacity: 2.500 kg Supply voltage: 80 V Ljdpfxoyl Ndbe Ahbjhg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Side shift = Remarks = General Country of production: Germany Condition CE type: CE Young used Linde E25H-600 with the following options: Side shift, Panoramic roof, LED Strips front and rear Bluespot 620 AH Battery Built-in charger

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, empty load weight: 141 kg, construction width: 1,200 mm, Fork carriage Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: New Lodjynhg Tspfx Ahbohg Description: used DURWEN bolt-on fork carriage Capacity: 2,500 kg/600 mm load center Body width: 1,200 mm Lug spacing: 980 mm Mounting: truck side ISO II, load side ISO III Weight: 141 kg Section thickness: 44 mm Projection: 80 mm Paint: RAL 7021 Incl. Durwen adapter frame

Condition: good (used), centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h Lsdob A Syujpfx Ahbshg -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp Lhjdpeyz E Rkofx Ahbeg Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1300 kg / 600 mm Sideshift Width 1150 mm Clamps 1270x1200 mm Opening range 440-1820 mm ID OS1968

Condition: used, functionality: unexamined, machine/vehicle number: H2X387V05197, Year of construction: 2019, operating hours: 3,260 h, load capacity: 2,500 kg, lifting height: 5,480 mm, free lift: 1,500 mm, DGUV certified until: 03/2027, fork length: 1,200 mm, Equipment: UVV, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 5,480 mm Overall height: 2,474 mm Free lift: 1,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive: Electric Ljdpoyxbzyjfx Ahbshg Dimensions & Weight Dimensions (L x W): 3,700 x 1,250 mm Weight: 5,000 kg Battery: 80 V 4PzS 500 Ah, performance measured at 83 V Operating hours: 3,260 h EQUIPMENT Former Linde full-service unit Service valid until 03/2027 Safety inspection (UVV) valid until 03/2027 Facelift model with tilt angle indicator 3rd valve, side shifter Half cab with windscreen wiper Lateral fall protection LED work light front LED work light rear Comfort seat All dimensions are approximate. No liability is assumed for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible with large forklift on site at own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior notice, Monday to Friday 7:00–16:30. If mast height is too high for transport, it can be dismantled upon request. If collection is not made within the agreed time, a storage fee of €20 per machine per day will be charged (payment due prior to collection).

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp Load center: 600 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for operation and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1,300 kg / 600 mm Sideshift Width 1,150 mm Clamps 1,270x1,200 mm Opening range 440–1,820 mm Ledpfx Ahsyzvpwebehg Cable reel ID OS1964

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp Lhjdpfsyzvnyjx Ahbjg Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1,300 kg / 600 mm Sideshift Width 1,150 mm Clamps 1,270x1,200 mm Cable reel ID OS1960

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp Load centre: 600 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: Good Description: Year 2019 ISO 2A (41 cm) Capacity 1300 kg / 600 mm Sideshift Width 1150 mm Clamps 1270x1200 mm Cable reel ID OS1959 Lhjdpoyzvntofx Ahbsg

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp Load centre: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1,300 kg /600 mm Sideshift Width 1,150 mm Clamps 1,270x1,200 mm Cable reel ID OS1958 Lhodjyzvnmopfx Ahbeg

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Carton clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Ledjyzdd Aspfx Ahbohg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 2A (41 cm) Capacity 1,300 kg / 600 mm Sideshift Width 1,150 mm Clamps 1,270x1,200 mm Cable reel ID OS1927