Used Amada Astro Ii 100 Nt for sale (31,143)

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Dkjdpfxjzabkvs Aqvsn Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Djdpfxoym Ih Uj Aqvskn

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 12,000 rpm, We offer you: Manufacturer: MORI SEIKI Model: NT 4200/1000S Year of manufacture: 2006 Control: MITSUBISHI M-720BM (MAPPS 2) Technical Data: Turning length: 1,000 mm Bar capacity: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Dksdpfsxxraqjx Aqven Counter spindle: Max. speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: Ø 73 mm Milling spindle: Speed range: 0 – 12,000 rpm Tool interface: Capto C6 Number of tool positions: 100 Hollow chuck: Ø 67 mm Operating hours: approx. 27,000 h Spindle hours: approx. 16,100 h Technical features and equipment: - Y-axis - Fully indexable B-axis - Chip conveyor, discharge to the right - Standard coolant system - Interface for high-pressure coolant system, 70 bar - Tool spindle with through-coolant - Coolant spray gun - Air blast through counter spindle - Manual tool presetting on the main spindle - 3-color signal light - Double foot switch - Simultaneous 5-axis machining - Automatic power shut-off - Tool offset for 5-axis machining - Programmable data input - Dynamic diameter/radius exchange - Stroke check before movement Operating hours: 26,875 h (as of 22.08.25) Spindle hours: 16,093 h (as of 22.08.25) Accessories, illustrated tools, and clamping devices are only included if explicitly specified in the additional information. Subject to change and error in technical details and specifications. Prior sale reserved!

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off Dkedpfx Aqjzamtveven * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) * Heavy-duty bucket holder, also serves as a spare wheel bracket * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!

Condition: like new (used), Year of construction: 2010, CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Equipment Electronic Handwheel Chip conveyor Swivel head Signal lamp High pressure pump Mist collector Workarea light CE conformity Chuck foot switch (double) for main and counter spindle Coolant gun Toolholders are not included Precision NC rotary table, rapid traverse and feed rate 100 1/min incl. direct measuring system Oil skimmer Linear scales Gantry loader LG-10 AII RENISHAW MP700 Working time hours Dsdpfx Aewwuaaeqvjkn Under power: 76.510 Spindle 1: 11.521 Spindle 2: 9.271 Potencial nominal kVA: 102 Basic machine dimensions / weight Length mm: 8.000 Width mm: 4.000 Height mm: 3.000 Weight kg: 15.000

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production Dkedpfx Aqsy Ub D Tjvjn The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Dsdsy Ub D Hspfx Aqvekn Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Djdpfx Aqoy Ub Dtevekn Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 185273, turning diameter: 610 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 88 mm, travel distance X-axis: 740 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 1,838 mm, rotational speed (max.): 12,000 rpm, rotational speed (min.): 15 rpm, overall weight: 17,600 kg, Mazak Integrex E410H-II 2008mod Mazatrol Matrix Dodpfx Aqsy T Hxgevokn The price its without dismantling

Condition: used, mileage: 158,894 km, power: 235 kW (319.51 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 16,960 kg, maximum load weight: 9,040 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,300 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, operating hours: 158,894 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, truck registration, Reference number for inquiries: 69738 Mercedes-Benz 2532 * Year of manufacture: 2015 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric window lifters * Air conditioning * Air suspension * Lift axle * Cruise control * PTO (Power Take-Off) * Differential lock * Low noise emission * Local/urban distribution > 7.5 t * Trailing steering axle * Electric windows and mirrors * Remote central locking * Lane departure warning system * Transmission: Automatic * Suspension: Leaf/Air * Gross weight: 26,000 kg * Unladen weight: 16,960 kg * Payload: 9,040 kg * Permissible total weight: 26,000 kg * Tire condition, 1st axle: 30% -- 60% - Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 30%|30% -- 30%|30% - Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30% - Tire size: 315/80 R22.5 * Wheelbase: 4,300 mm * Tire sizes: 315/80 R22.5 * Superstructure: Faun Powerpress II 524 * Zöller Delta 2301 bin lift * 3 seats * Central lubrication system * On request, we are happy to send you a video or additional photos Disclaimer: Dkjdpfowwqm Nox Aqvsn Subject to change, prior sale, and errors excepted. More images and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documentation * Order of export / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV-inspection, registration service * Transfer/delivery of commercial vehicles Contact our experienced staff – we will be pleased to advise you.

Condition: used, mileage: 364,441 km, power: 95 kW (129.16 HP), first registration: 07/2015, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle No.: 362-25 Mercedes-Benz 313 CDi BERTSCHE lightweight waste compactor / collection vehicle First registration: 07.2015 * Wheelbase: 3,250 mm * Rotating beacon * Electrically foldable signal panel * Full service history exclusively with DAIMLER Special equipment Hill start assist, additional reinforced battery, digital tachograph with download capability, 180 A alternator, programmable special module, amber warning beacon, acoustic reverse warning signal (external sounder), front mud flaps, seat upholstery: synthetic leather (driver’s cab), double passenger seat in cab, reinforced rear stabilizer, reinforced front stabilizer, heavy-duty shock absorbers, isolation relay for additional battery, 95 Ah fleece battery, reinforced front axle Further equipment: Adaptive brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicator, 74 Ah battery, brake assist, brake system with ABS+ASR, driver’s cab roof lining, lockable glove compartment, body type: standard flatbed, main fuel tank: 75 liters, headlamp leveling, truck registration, model update, engine: 2.1 l - 95 kW CDI CAT (2143 cc), wheelbase: 3,250 mm, smoker’s package, tire repair kit with compressor, low emissions according to Euro 5 standard, driver’s side seat belt system with warning system, passenger seat in cab adjustable, steel rims 6.5x16, service interval display Assyst, heat-insulating glazing, permissible gross weight 3.50 t Viewing possible at any time during our business hours, test drives by appointment! Dkedpexntprofx Aqven For export sales, a deposit will be retained, which will be refunded after receipt of the certificate of arrival. Company and advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information provided without guarantee – errors, changes, typographical mistakes and intermediate sale reserved. Vehicle descriptions do not constitute assured characteristics. Please refer to our General Terms and Conditions and ensure you are familiar with them.

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Chain hoists available upon request. Dsdoy Ufddepfx Aqvekn Very good, used condition. Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: used, mileage: 127,000 km, power: 70 kW (95.17 HP), first registration: 03/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €8,395 Mercedes Benz Sprinter MAXI – Box van (SAXAS) Registered: 03/2012 Mileage: 127,000 km ---- Please, no emails – due to time constraints, we can only process them sporadically! Thank you for your understanding! Opening hours and further information: Viewing/purchase possible without prior appointment: No appointment required! Dodpovh S D Sjfx Aqvskn Mon – Thu: 9:00 a.m. to 4:00 p.m. Fri: 9:00 a.m. – 1:00 p.m. Sat: 9:00 a.m. – 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. ---- MOT: Can be performed upon request before purchase - Full service history - 1st owner - LED interior lighting - Motion detector in the interior - Sliding door between the cab and the box van - Rear view camera (see photos) - Various ventilation openings - Foldable shelves - Electrically locked doors - Rear step Loading area length: 4.40 m Loading area height: 2.00 m Loading area width: 2.00 m Special equipment: - Hill start assist - Generator 220 A - Steering wheel (adjustable steering column) - Radio preparation - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - Fleece battery 95 Ah Additional equipment: - Adaptive brake light - Airbag for driver - Washer fluid level indicator - Exterior mirrors, electrically adjustable and heated on both sides - Exterior mirrors with integrated turn signal - Battery 74 Ah - Brake assist - Braking system with ABS+ASR - Roof lining in the cab - Lockable glove compartment - Body/structure: Box van - Fuel tank: Main tank 75 liters - Headlight range adjustment - Truck registration - Engine 2.1 L - 70 kW CDI - Wheelbase 4325 mm - Smoker's package - Tire repair kit with compressor - Low emissions according to Euro 5 emission standard - Seat cover/upholstery: Fabric Lima - Service interval display Assyst - Heat-insulating glazing - Permissible total weight 3.50 t If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch More offers at / More offers at / Equipment determined with the help of a VIN query; technical errors may occur. Information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Dsdoy Edc Hspfx Aqvskn Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, as well as integrated B- and Y-axes, this machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control unit, allowing for both conversational and ISO programming, and offering modern features for efficient and productive manufacturing. Technical Data at a Glance: Dksdpfx Aqeyir I Rsvon • Travel range: 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B-axis features a swiveling range of 225°, enabling complex five-sided machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. • Maximum turning and swing diameter: 545 mm each. • The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW of power output, making it ideal for milling, drilling, and tapping operations. • The machine is equipped with a tool changer (included), allowing a maximum tool length of 210 mm, as well as a KM tool holder system which ensures high rigidity and fast tool changes. Equipment includes: • Chip conveyor • “Tool Eye” tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, construction height: 2,970 mm, fork length: 2,000 mm, empty load weight: 13,260 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards – delivering maximum quality and safety. From the chassis to the battery and including drivetrain, brakes, steering, and electrics – every machine undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices Djdpfxsy Rn Eio Aqvokn ✔ Personalized support – even after purchase Test on site now and receive individual consultation – we will find the right solution for you. Materials Handling Equipment Details: Manufacturer: Heli Model: Counterbalance Forklift CPD 100 Drive type: Electric Load capacity: 10,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,800 mm Mast type: Triplex Free lift: Yes Overall width: 2,165 mm Overall height: 2,970 mm Fork length: 2,000 mm Unladen weight: 13,260 kg Tyres: Solid rubber Model type: CPD 100 Battery type: Lithium-ion Battery weight: 800 kg Cabin type: Full cabin – front, roof & rear window + steel doors (suspended) Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road-legal equipment for potential restricted on-road use: indicators, tail lights, reverse lights, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., Dkjdpstmtktofx Aqven main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: used, mileage: 327,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2013, emission class: euro5, color: white, number of seats: 8, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Special equipment: 13-pin trailer socket, outside temperature display, heated rear window, fuel filter with water separator, spare wheel with road tires, spare wheel holder under the end of the frame including jack, interior rearview mirror, seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seats in the cargo/passenger compartment: 1st row, 2-seater bench, seats in the cargo/passenger compartment: 2nd row, 2-seater bench, seats in the cargo/passenger compartment: 3rd row, 3-seater bench, front stabilizer, darkened rear glazing / black tinted glass, fleece battery 95 Ah Additional equipment: 3rd brake light, storage compartments: luggage net on rear doors, storage net on the left front seat back, storage net on the right front seat back, adaptive brake light, airbag on the passenger side, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, BlueEfficiency package, floor group, station wagon version, brake assistant, braking system with ABS+ASR, headliner, headliner in the cab, windows for rear doors, windows for rear doors / tailgate with wiper/washer system, windows in the cargo/passenger compartment: - fixed, rear left, windows in the cargo/passenger compartment: - fixed, rear right, windows in the cargo/passenger compartment: - fixed, front left, windows in the cargo/passenger compartment: - fixed, front right, lockable glove compartment, rear door (opening angle 180 degrees), wooden floor in the cargo area, body/superstructure: high-roof station wagon, child safety lock, fuel tank: main tank 75 liters, headlight range adjustment, engine 2.1 liters - 120 kW CDI CAT, passenger car registration, wheelbase 3665 mm, smoker's package, low emission according to Euro 5 emission standard, sliding door cargo/passenger compartment right, safety belt system with warning system (driver's side), seat equipment: Isofix child seat system, seat cover / upholstery: fabric Lima, seats in the cab: passenger seat adjustable, all-around glazing, service interval indicator Assyst, heat protection glazing (windshield with band filter at the top), permissible gross weight 3.00 t, auxiliary heater (air) electric. Dkedpfx Ajy Trbajqvon

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Tool carrier I (X/Y/Z/B): Technology:Tool turret Djdpfx Aqjy Hnt Esvjkn Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2009, clamping force: 1,000 kN, total width: 1,217 mm, total height: 1,990 mm, overall weight: 4,900 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details. • Opening stroke: 370 mm • Platen size: 610 × 550 mm • Distance between tie bars: 420 × 360 mm • Min/Max mould height: 120 / 450 mm • Ejector force: 34 kN • Ejector stroke: 120 mm • Max mould area (250 bar): 400 cm² Dedpfxjyzzmzj Aqvokn • Injection unit (screw options) • 32 mm: L/D 24; injection volume 169 cm³; shot weight (PS) 156 g; injection rate 95 cm³/s; injection pressure 2352 bar; plasticizing capacity (PS) 18 g/s • 37 mm: L/D 21; injection volume 219 cm³; shot weight (PS) 202 g; injection rate 127 cm³/s; injection pressure 1759 bar; plasticizing capacity (PS) 20 g/s • 45 mm: L/D 17; injection volume 324 cm³; shot weight (PS) 298 g; injection rate 188 cm³/s; injection pressure 1189 bar; plasticizing capacity (PS) 22 g/s • General injection data • Screw torque: 440 Nm • Max screw speed: 440 rpm • Barrel heating power: 7.5 kW • Heating zones: 3 + 1 • Nozzle contact force: 49 kN • Electrical and hydraulics • Motor power: 15 kW • Total installed power: 22.5 kW • Hydraulic oil capacity: 150 L • Footprint: 5.4 m²

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Djdpfx Asww I Tmeqvjkn

Condition: ready for operation (used), Year of construction: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350blisters/min, max. blister dimensions X/Y/Z: 90mm/145mm/12mm, max. carton dimensions X/Y/Z: 100mm/155mm/105mm. Line dimensions X/Y/Z: approx. 7100mm/1300mm/2250mm. Documentation available. An on-site inspection is possible. A package sale is preferred. Expected to be available from October 2026. Dksdpey I Acqsfx Aqvsn

Condition: used, mileage: 80,000 km, power: 70 kW (95.17 HP), first registration: 05/2012, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Mercedes Benz Sprinter MAXI - Box Body (SAXAS) Euro 5 First registration: 05/2012 Mileage: 80,000 km VAT deductible Net sale price: €7,890 Please, no emails! Due to time constraints, emails can only be dealt with sporadically. Thank you for your understanding! Opening hours and further information: Inspection/purchase possible without appointment: No appointment necessary! Mon-Thu: 9:00 – 16:00 Fri: 9:00 – 13:00 Sat: 9:00 – 12:00 Dsdowx U Sljpfx Aqvokn Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch Please try to call several times, as we are often in customer meetings. More offers at If you have any questions, Christian Hirsch or our friendly staff will be happy to assist you. -Service history maintained -1st owner -LED interior lighting -Motion detector in cargo area -Sliding door between cab and box body -Reversing camera (see photos) -Various air vents -Foldable shelves -Electrically locked doors -Rear step Load length: 4.40 m Load height: 2.00 m Load width: 2.00 m Special Equipment: - Hill start assist - 220 A generator - Mechanically adjustable steering column - Radio pre-installation - Front mud flaps - Reinforced front and rear stabilisers - 95 Ah fleece battery Additional Equipment: - Adaptive brake lights - Driver airbag - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both) - Exterior mirrors with integrated indicators - 74 Ah battery - Brake assist - Brake system with ABS+ASR - Roof lining in cab - Lockable glove compartment - Body type: box body - Main fuel tank: 75 L - Headlight levelling - Truck registration - Engine: 2.1 L – 70 kW CDI - Wheelbase: 4,325 mm - Smoker package - Tire repair kit with compressor - Low emissions according to Euro 5 standard - Seat upholstery: Lima fabric - Service interval display (Assyst) - Heat-insulating glazing - Permitted gross weight: 3.5 t For any questions: Christian Hirsch Please try several times, as we are often with customers. The equipment list was compiled using a VIN query, technical errors may occur as a result. The information provided online is non-binding and does not represent guaranteed specifications. The seller is not liable for typing or data transmission errors/changes/data entry errors. Subject to errors and prior sale.

Condition: refurbished (used), For Sale: Refurbished EOS M100 – Ready to Use This fully inspected and refurbished EOS M100 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Featured Dksdpfx Aowt Dhrjqvon We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: used, mileage: 70,000 km, power: 70 kW (95.17 HP), first registration: 04/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €11,700 Mercedes Benz Sprinter MAXI - Box Body (SAXAS) 19% VAT deductible Euro 5 Please no emails, as we can only respond sporadically due to time constraints! Thank you for your understanding. --- Opening hours and further information: Viewings / purchase possible without prior appointment: No appointment necessary! MON - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen For inquiries, please contact Christian Hirsch or our friendly staff. Inquiries: Christian Hirsch Please try multiple times as we are often in customer meetings. --- Dksdpfx Aevh S Nuoqvon More offers available at TÜV (roadworthiness inspection): New on request at sale Full service history Single owner - LED interior lighting - Interior motion detector - Sliding door between cab and box - Rear-view camera (see photos) - Various ventilation outlets - Foldable shelves - Electrically locked doors - Rear step Cargo space dimensions: Length: 4.40 m Height: 2.00 m Width: 2.00 m Special equipment: - Hill start assist - Generator 220 A - Steering wheel (mechanically adjustable steering column) - Radio pre-wiring - Front mud flaps - Rear stabilizer - Reinforced front stabilizer - 95 Ah AGM battery Additional equipment: - Adaptive brake light - Driver's airbag - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both) - Exterior mirrors with integrated turn signal - 74 Ah battery - Brake assist - Brake system with ABS+ASR - Headliner in driver's cab - Lockable glove compartment - Body/type: box body - Main fuel tank: 75 L - Headlamp range adjustment - Truck registration - Engine: 2.1 L - 70 kW CDI - Wheelbase: 4,325 mm - Smoker package - Tire repair kit with compressor - Low-emission (Euro 5 emission standard) - Seat trim / upholstery: Lima fabric - Service interval indicator Assyst - Heat-insulating glazing - Permissible gross weight 3.5 t For inquiries: Christian Hirsch Please try multiple times as we are often in customer meetings. Christian Hirsch or our friendly staff are happy to help with any questions. More offers at / Equipment determined using VIN lookup. Technical errors may occur. Details provided online are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typos, data transmission errors, modifications, or input mistakes. Subject to error and prior sale.