Vertical Machining Centre

Hurco VMX 30i

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Control Unit Brand HURCO Model WINMAX 5 GEN Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Pgjdpfx Aoxz H Rvsg Dow Table Length 510 mm Table load 1350 kg This 3-axis Hurco VMX 30i was manufactured in 2018 and features a robust vertical machining center design. It boasts a spindle speed of 12000 rpm, a spindle motor power of 13.5 kW, and a tool changer with 30 pcs capacity. The machine dimensions include X=760 mm, Y=510 mm, and Z=610 mm, with a table size of 1020x510 mm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection Pgjdpfx Ajh Ellzjg Dow 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: used, Year of construction: 2021, x-travel 762 mm y-travel 508 mm Podpfx Aev Ehc Ejg Degw z-travel 610 mm table surface area 1020 x 508 mm control WinMax Mill 10.3.4 ST tool taper SK 40 spindle turning speed - stepless max. 12000 U/min spindle motor 13,4 kW tool change unit 30-fach table load 1,36 t weight of the machine ca. 5,4 t dimensions of the machine ca. 3,0 x 2,4 x 2,4 m Vertical 3-axis machining center - new demonstration system - HURCO WinMax Mill 10.3.4 ST control system - spindle with internal cooling - Renishaw measuring probe

Condition: ready for operation (used), Year of construction: 2019, operating hours: 213 h, Control Unit Brand HURCO Model MAX-5 Media Chip conveyor Yes Additional Equipment 30 tool changer Laser bridge Accessories direct measurement Clamping devices Vice Probe 2 software units / (1 x plain text dialog programming on the machine + 1 x for ISO- / code programming by external programming device or CAD/CAM system) Pentium technology, SSD (solid-state drive) storage medium, / 2 GB RAM, Ethernet interface, USB interface, system-internal self-diagnosis, WINDOWS platform Chip splash guard cabin/Coolant system/Coolant spray gun/Flushing system to support chip removal/LED machine light in the work area Signal light for machine operating status/Set of machine shoes/High-pressure cooling system for coolant supply through the spindle: /Cooling lubricant type Emulsion/Coolant pressure 20 bar/Integrated hydraulic tool clamping system Pgodpfx Aoxu Rw Hog Dsw This 3-axis Hurco VMX30i vertical machining center was manufactured in 2019. It offers robust construction and precision engineering, ideal for a variety of machining tasks. Consider the opportunity to buy this Hurco VMX30i vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen Pedpjnp Hwkjfx Ag Degw type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: ready for operation (used), Year of construction: 2016, operating hours: 10,311 h, Main Drive Spindle speed range 10 to 12000 Spindle motor power 13 kW Number of axis 3 Movement Psdoxulgpepfx Ag Djgw X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table Table load 1000 kg Tools Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Media Chip conveyor Yes Additional Equipment Cooling Water System Main Cooling Chip Protection Cabin/Cover Machine Lamp Machine Base Machine Status Indicator Lamp This Hurco VMX 30i was manufactured in 2016. It features a robust table size of 1020x510 mm with a maximum load capacity of 1000 kg. Equipped with a high-speed range up to 12000 rpm and a rapid traverse rate of 35/35/30 m/min in X/Y/Z, it ensures efficient machining. Additional features include a cooling water system, chip conveyor, and protective cabin. Consider the opportunity to buy this Hurco VMX 30i vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Psdetwzhvepfx Ag Degw Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: Pedperfucfefx Ag Dsgw 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, functionality: fully functional, machine/vehicle number: FN6453.., Year of construction: 2021, operating hours: 7,541 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,190 mm, fork length: 1,800 mm, empty load weight: 5,667 kg, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: FN6453.. Pjdpfx Ageu Txpys Degw Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Front tires Type: Solid rubber Front tires Condition: 40 - 60% Rear tires Type: Solid rubber Rear tires Condition: 40 - 60% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: JH Battery type: PzS Battery year of construction: 2021 Battery condition: 60 - 80% Description: SE tires non-chalking, seat fabric, joystick, Sideshift, Tine adjuster, ZV Durwen 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield,