Vertical machining center

HAAS VF-2

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A Gksdsxuih Rjpfx Afisd EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: used, Year of construction: 1998, turning length 3500 mm Gsdpfjv Hhv Iex Afiekd swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate

Condition: excellent (used), Year of construction: 2018, operating hours: 3,010 h, functionality: fully functional, machine/vehicle number: 1146808, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Equipment: chip conveyor, Vertical Super-Speed Machining Center SK-40 spindle, 30 HP vector drive, 12,000 RPM, inline direct drive, side-mount tool changer, power-failure detection module, synchronized tapping, 55-gallon coolant system with continuous coolant flow. Additional features: - 32GB memory expansion - CT option - Ethernet interface - Remote monitoring of Haas machine - Media display - WiFi connection for Haas control - Haas Window Blast - Spiral chip conveyor - Programmable coolant nozzle Gsdpfxow U U Abo Afiekd - Through-spindle coolant 21 bar

Condition: excellent (used), Year of construction: 2022, operating hours: 1,103 h, functionality: fully functional, machine/vehicle number: 1194909, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, nominal power (apparent): 30 kVA, workpiece length (max.): 762 mm, workpiece width (max.): 457 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 680 kg, total height: 2,600 mm, total length: 2,540 mm, total width: 2,260 mm, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, spindle nose: (maximaal) 610 mm (minimaal) 102 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas VF-2SSYT CNC Vertical Machining Center – Super Speed Edition Very clean Haas VF-2SSYT for sale, used approximately 99% for aluminum machining only. Super Speed version with extended Y-axis – ideal for precision work and high production speed. Includes: Gkjdpfx Aexv A Aqjfijd ±40 toolholders with various end mills, drills, and taps Renishaw probe (automatic tool and workpiece measurement) 2 machine vises Machine is in excellent condition and ready for immediate use.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ST-35, Haas ST-35 CNC lathe - precision and performance for your production -used- Increase your manufacturing efficiency with the proven quality and performance of the Haas ST-35! This robust CNC lathe offers you the perfect combination of power, accuracy and flexibility for a wide range of applications. Highlights: • Large turning diameter: Ideal for machining large and complex workpieces. • Powerful spindle: High speeds and strong torque for demanding materials. • Precise control: User-friendly Haas control for easy programming and short set-up times. • Robust design: Durable and low-maintenance - perfect for continuous use. • Flexibility: Versatile applications thanks to various tool holders and options. Perfect for: • Metalworking • Prototype construction Gksdsv Hcz Sopfx Afiod • Small and large series production The Haas ST-35 is ready to use straight away and is waiting to take your production to the next level. Interested? Contact us now for more information or a viewing! Don't miss this opportunity - invest in quality and precision! The machine can be viewed and tested at any time by appointment. We also offer an assembly service including installation for you. Please refer to the attached PDF for important technical information.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, Control Unit Brand HAAS Main Drive Spindle speed range 8100 Number of axis 3 Movement X-Axis Movement 706 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm Workpiece Workpiece weight 1361 kg This 3-axis HAAS VF-2 was manufactured in 2008. It features a robust 706 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. With a maximum spindle speed of 8100 rpm and a spindle motor power of 22.4 kW, it's ideal for demanding machining tasks. The machine includes a chip conveyor and documentation for ease of use. Consider the opportunity to buy this HAAS VF-2 vertical machining centre. Contact us for more information. Application Types Milling Godpfxjxq Hrxs Afijkd

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Godpfjxnm A Eex Afiekd Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. All slides run smoothly and evenly. The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Gkodsv Rxhiepfx Afied Please take advantage of the opportunity to view this machine on-site.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 26026, travel distance X-axis: 762 mm, travel distance Y-axis: 506 mm, travel distance Z-axis: 608 mm, - Year of manufacture: 07/2001 - 1st owner, from our own use - Fully functional, powered, ready for demonstration Gkedexp N Nqopfx Afiod - Travel paths: 762x506x608 mm - Tool changer with 24+1 magazine positions - Spindle speed up to 7500 rpm - BT 40 - Rotatable coolant supply - Spiral chip conveyor - Serial number: 26026 Net price unloaded, ex-site Luckenwalde (Germany), without transport.

Condition: good (used), Year of construction: 2007, In good technical condition and fully functional. Year of manufacture: 2007 X-axis: 762 mm Y-axis: 406 mm Z-axis: 508 mm Gedpfx Aexdxrqjfijkd Length x Width x Height: 2490.0 × 2340.0 × 2570.0 mm Weight approx. 3550 kg

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM) Gedpfxjw Ett Ie Afijkd   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 10781, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: HAAS, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, rotational speed infinitely variable, FOR SALE 2in1 HAAS VF2 CNC! 1 artificial stone +1 donor machine. Donor machine has been in the yard since 2016 , it was installed in stone condition. Maybe it can be revived.We can send you a video on request! Gkodevgrn Iepfx Afijd

Condition: used, Year of construction: 2018, operating hours: 8,300 h, Vertical machining center, Haas brand, model VF-2, year 2.018. Maximum spindle speed: 8,000 RPM, X axis travel: 762 mm, Y axis: 406 mm, Z axis: 508 mm, tool magazine for 20 units, worktable dimensions: 914 x 356 mm, maximum weight on worktable: 1,361 kg. Gjdpfx Afovkw I Isiskd

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Godpfxsv Irwro Afiskd Table size: 800 x 400 mm

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 3720 kg Control Unit Brand HAAS Main Drive Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 406 mm Z-Axis Movement 508 mm This 3-axis HAAS VF-2SS vertical machining center was manufactured in 2011. It features a 12,000 rpm spindle speed and a table size of 356 mm by 914 mm. With X, Y, and Z travels of 762 mm, 406 mm, and 508 mm respectively, it handles a variety of machining tasks. Consider the opportunity to buy this HAAS VF-2SS vertical machining center. Contact us for more information. Gjdpfew R E Ndox Afiokd Application Types Milling