Vertical machining center DOOSAN MYNX 500

milling machining centers - vertical

Call

DOOSAN VERTICAL MACHINING CENTER 1400X670 TABLE SIZE 1270X670X625 AXIS BT40 30 TOOLS ATC Bbplikgk FANUC 32 i CONTROLLER

Listing

Oelde

(dealership location)

1118 km

DOOSAN Mynx 6500

2011

used

Call

x-travel 1.270 mm y-travel 670 mm z-travel 625 mm control i-Series Fanuc Workingspindle: Puxoywzf Max. Speed 8.000 min/-1 drive devices 11 / 15 max. Torque 191 Nm tool taper SK / ISO 40 work table: table surface area 1.400 x 670 mm T-slots 5 T-slot - width 18H8 mm T-slot - distance 125 mm max. table load 1.000 kg distance spindle nose and table 150 - 775 mm max. workpiece height 580 mm tool magazin: number of toolpositions 30 pos. tool taper SK / ISO 40 max. tool length 300 mm max. too...

Listing

Cuggiono

1509 km

VERTICAL MACHINING CENTER

DOOSAN MYNX 650

2008

excellent (used)

Call

Accessories: Chip conveyor belt Remoted electronic handwheel Cyvezjwl3 Automatic high pressure refrigeration system pressure through the spindle line 12 bar

Listing

Cuggiono

1509 km

VERTICAL MACHINING CENTER

DAEWOO MYNX 500

2001

used

Call

Vertical machining center with 3 axes DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor belt Remote electronic handwheel Automatic high-pressure cooling system Bp3cymvw0q pressure through the spindle line

Listing

Hoofddorp

877 km

vertical milling machine

DAEWOO Mynx 500

2001

good (used)

€17,250

Machining center DAEWOO Mynx 500

Call

X-stroke = 1020mm, Y-stroke = 510mm, Z-stroke= 574mm. (block guide) Control Siemens 802 D. Spindle speed is 8000 rpm. Table dimensions 1200x500. Iv28vwxco Umbrella changer 24 tools. Includes 24 tool holders. Weight about 8000 kilos. Chip conveyor. Oil cooler for spindle. 15 kw spindle motor.

Listing

La Grand-Croix

1275 km

DAEWOO Mynx 500

2000

excellent (used)

Call

Control system Fanuc 21M Year of manufacture 2000 Buwnce7iu Table dimension 1200 x 500 mm Load capacity 800 kg stroke X axis 1020 mm stroke Y axis 510 mm stroke Z axis 575 mm spindle/tapper SK 40 rotation speed range 8000 rpm spindle power 15 Kw Chip conveyor Tool magazine: 24 positions Remote hand wheel

Listing

Trittau

(dealership location)

1230 km

Machining Center - Horizontal

DAEWOO-DOOSAN ACE H500

1997

used

Call

x-travel 800 mm Ccoxxfovbd y-travel 650 mm z-travel 650 mm Control main spindle: max. turning speeds 5000 min/-1 drive capacity - main spindle 15 kW In our opinion, the machine is in very good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!**...

Listing

2011 km

CNC Vertical Milling Machining Centers

DOOSAN DNM 4500

2021

used

Call

Fanuc i Series Plus 1167 motohours X 800 mm Y 450 mm Z 510 mm Table 1000 x 450 mm Vwniri spindle speed 8000 rpm L x H x W: 2615x2985x2158 mm, Weight 5000 kg technical documentation (AJ, SK) Loaded with crane The machine has a memory extension - dataserver

Listing

Zevenbergen

891 km

CNC Multitasking Turn-/Mill Centre

Doosan Daewoo PUMA MX 2500 ST

2004

used

Call

CNC Multitasking Turn-/Mill Centre CNC Control Fanuc 16 i -TB Turning diameter: 550/300 mm Turning length: 1020 mm Spindle bore diameter: 77 mm Spindle nose: A2-8 Spindle nose sub spindle: A2-8 Turning speed: 3500 1/mm Turning speed sub spindle: 3500 1/min Swz7g0 Milling head speed: 10.000 1/min Movement X-axis: 555 mm Movement Y-axis: +80/-80 mm Movement Z-axis: 1095 mm B-axis travel 240 ° C-axis indexing: 0,001° Tool taper: Capto C6 Tools in magazine: 40 If you have any questions concerning t...

Listing

Portugal

1560 km

Machining centers (vertical)

Doosan NX 5500 II

2013

ready for operation (used)

Call

General Data Measurements width 2900 mm Measurements depth 2530 mm Measurements height 3064 mm Machine weight 9000 kg Control Unit Brand HEIDENHAIN Model FANUC 31i Main Drive Spindle speed range 20000 Spindle motor power 11 kW Jifuorb Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm Table Outer length 1000 mm Outer width 550 mm Table load 700 kg Tools Slots in storage 30 Max weight 7 kg Max tool diameter 80 mm Max tool length 220 mm This Doosan...

Listing

Karlsbad

1271 km

CNC Turning- and Milling Center

DOOSAN PUMA MX 2500 ST

2005

used

Call

turning diameter:600 / 750 mm turning length:1020 mm control:FANUC 18 iT-B bar material dia.:76 mm spindle drive:26/22 kW Y8ajrpqv turning speeds:3.500 1/min b-axis:240 ° c-axis:360.000 Grad tools in tool magazin:40 Stück y-axis:+-80 mm work piece power:5,5 kW total power requirement:94 kW weight of the machine ca.:12,5 t dimensions of the machine ca.:5,8 x 2,3 x 2,7 m 9 Axis turning / milling center with 1 turret, 2 spindles and turning/milling head, 3-jaw-chuck main spindle dia. 250mm, 3-j...

Listing

Tuřanka, 627 00 Brno-Slatina, Tschechien

1788 km

CNC Lathe

DOOSAN PUMA TT 1500 SY

2015

excellent (used)

Call

CNC Lathe PUMA TT 1500 SY Producer: DOOSAN YP: 2015 Control Fanuc ... Fanuc 31i Turning diameter ... 230mm Turning length ... 120mm inclined bed Axis Y ... 100mm counter spindle Spindle bore ... 51mm Tool turret... 24 powered tools.....12 Swing over bed ... 300mm Spindle speed ... 60-6000 rpm. controlled axes... 8 Axis C ... 360° Axis X ... 165mm Axis Z ... 470mm Max. workpiece weight... 70kg L x W x H ... 3500x2080x2070mm F33rgcz Machine weight ... 8500kg The machine is in very good condition...

Listing

Barry St, Oldham OL1 3NE, UK

407 km

Doosan

Doosan DNM4500

2017

excellent (used)

Call

Table size 1000mm X 450mm. T Slots 3 x 18mm. Table loading 600kg. X/Y/Z travels 800mm/450mm/510mm. Rapids X/Y/Z 36/36/30m/min. Min/Max height under spindle 150mm/660mm. Spindle motor 18.5/11kW. Spindle speed 12,000 rpm. Max tool dia. 80mm. Max tool dia with adjacent empty position 125mm. Max tool length 300mm. Max tool weight 8kg. Tool changer 30 positions. Toolchanger speed 3.2 seconds. Spindle taper BT40. Siemens 828D Control. Swarf Conveyor. Machine dimensions L x W x H 2185mm x 2615mm x 299...

Listing

Cuggiono

1509 km

Horizontal machining centre

DOOSAN HM500

2007

excellent (used)

Call

Listing

San Giovanni In Marignano

1856 km

VERTICAL MACHINING CENTER

Doosan DNM500

2013

good condition (used)

€45,000

EXW Fixed price plus VAT

Call

Year 2013; CNC Fanuc Series Oi model D; ISO40 tool holder cone; spindle rotation speed rpm 8000; spindle motor power 9/11 kW; X-axis stroke 1020 mm; Y-axis travel 540 mm; Z-axis stroke 510 mm; X/Y/Z axis rapid feed mm/min 36/36/36; table dimensions 1200x540 mm; permissible weight on the table 800 kg; tool magazine capacity 30 places; chip conveyor included; machine dimensions 4080x2120 mm H=2710 mm, machine weight 6500 kg; complete with all documents and CE certificate. Cjx83dlnlj

Listing

Borgo San Dalmazzo

1527 km

CNC LATHE

DOOSAN PUMA 2500Y

2004

excellent (used)

Call

CNC Fanuc 18i-TB CAPACITY': Max rotating diameter on the bench: mm 600 Max rotating diameter on the carriage: mm 550 Max turning diameter: mm 330 Max turning length from self-centring: mm 500 SPINDLE: Spindle nose: ASA 8 Hydraulic chuck with 3 jaws: mm 254 Continuously variable spindle rotation speed: rpm 35 – 3,500 Spindle motor power (cont./30 min): kW 15/22 max torque spindle motor (cont./25% ED): Nm 295/433 Front bearing diameter: mm 130 Spindle hole diameter: 90 RACING: X axis travel: mm...

Listing

Hyundai Doosan Rock bucket 195cm 2500ltr

Holten

991 km

Rock bucket 195cm 2500ltr Doosan

Hyundai Doosan Rock bucket 195cm 2500ltr

new

€6,350

Call

Rock bucket R380 Hyundai / Doosan Brand: Doosan / Hyundai Type: R380 Width 195cm Capacity 2500 litres 6x teeth Rock version Weight 1535kg Pens 100x100 Stocknr: UR0738 Ch0pac2seg

Listing

Cuijk

971 km

Doosan DL500

DOOSAN DL500

2007

good (used)

€29,900

Call

Bucket with teeth , Airco , Central grease , EPA on engine , tires 80% (29.5R25) Llo2u2js Please contact us for any questions or vists

Listing

Friedrichsdorf

1210 km

Pallet stacker- high lift

Doosan D30NXS

2022

used

Call

Diesel Forklift Capacity: 3000kg Load Centre: 500 Lift height: 4700mm Closed height: 2145mm Overall weight: 4850kg Mast type: Triplex YOM: 2022 Condition: New Transmission: Wandler Engine: Kubota Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% 0m0gmlc Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 60 - 80% Side Shift, 3rd valve, 4th valve, Weatherproof cover,

Listing

2008 km

Lathes

Doosan Puma 2000SY

2005

ready for operation (used)

Call

Control Unit Brand FANUC Model Series 18i - TB Main Drive Spindle speed range 4500 Spindle motor power 18.5 kW Tool taper ASA 6” Crpkssxhd9 Number of axis 5 This DOOSAN PUMA 2000SY Lathe was manufactured in the year 2005. It is equipped with a FANUC Series 18i - TB control unit and has 5 axis. The machine has a spindle speed of 4500 rpm, is in very good condition and well maintained. Application Types Turning

Listing

Dinslaken

1037 km

Doosan BSL16N 7

2022

used

€9,600

Call

Listing

Breitenfelde

1246 km

Mobile excavator

Doosan DX 165 WR-7

2022

new

Call

Grapple hydraulics ,Hammer hydraulics ,Cabin ,Air conditioning ,Adjustable boom ,Auxiliary lights - Adjustable boom - 5.35 m articulated boom - 2.50 m stick - hydraulic line for hammer/grapple/shear and quick coupler - refueling pump - LED work lights - rotating beacon - Around View Monitoring (AVM 360 Around View) - proportional control - air conditioning - heated and cooled driver's seat - radio - Doosan connect (telematics) - twin tires 10.00-20-16PR - blade - weight 17.040 kg - Diesel engine...

Listing

1293 km

Wheeled Excavator

Doosan Solar 140 WV-RW Rail Road

2007

used

€35,900

Call

We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy: • Fully inspected machines C7mha0rk • Delivered to your jobsite • Money Back Guaranteed 2007 - Doosan Solar 140 WV-RW Rail Road | Used Wheeled Excavator with rail-road wheels, 4.3m boom, 2.1m stick, 5 hydraulic lines and a Doosan engine. Equivalent to a Doosan DX RR. CE marked: Yes EPA marked: No 54 Inspection points 38 Approved 14 Imperfections 2 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed...

Listing

Garbsen

1199 km

Doosan G 30 NXP

2022

used

€25,900

Call

LPG Forklifts Capacity: 3000kg Load Centre: 500 Lift height: 4710mm Free lift: 1300mm Overall Length: 2665mm Overall width: 1290mm Closed height: 2155mm Overall weight: 4641kg Mast type: Triplex Fork length: 1200mm YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedienungsanleitu...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

1782 km

CNC lathe

DOOSAN PUMA 2600 LM

2013

good (used)

Call

Catalog No. : 5838 Type: PUMA 2600 LM Producer: DOOSAN Made in: 2013 Characteristic: Control system: DOOSAN FANUC i-series Total hours: 9868 h Maximum-turning length: 1280 mm Turning diameter over bed (max): 780 mm Turning diameter over cross slide (max): 630 mm X-Axis travels: 260 mm Z-Axis travels: 1350 mm C-Axis travels: 360 Maximum power of the main spindle: 22 kW Diameter of the spindle bore: 86 mm B8waqeufwj Minimum rotary speed of the main spindle: 30 1/min Maximum spindle spe...

Listing

Friedrichsdorf

1210 km

Doosan D30NXP mit Zwillingsbereifung

2022

used

Call

Diesel Forklift Capacity: 3000kg Load Centre: 500 Lift height: 4700mm Free lift: 1400mm Closed height: 2145mm Overall weight: 4850kg Mast type: Triplex Fork length: 1200mm YOM: 2022 Condition: New Transmission: Wandler Engine: Kubota E2hiwl3jm Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Side Shift, 3rd valve, 4th valve, Weatherproof cover, Full free lift, Twin tires,

Listing

Leipzig

1415 km

Generator

Doosan PO86TI

2021

used

Call

rated capacity: 220 kVA drive motor: kW Number of working hours: 0 h B972wkxa type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m transport dimensions LxWxH: m the generator is silent and NEW

Listing

Dinslaken

1037 km

Front fork lift

Doosan B50XC 7

2020

used

Call

Special equipment: Forks: 1500 x 150 x 60 mm Tires(front): 28x12, Tires(front): 5-15, Gearbox: automatic, Visual condition: new, Technical condition: new. Cgarjhy0ef

Listing

1293 km

Wheeled Excavator

Doosan Solar 140W-V Rail Road

2005

used

€35,900

Call

We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2005 - Doosan Solar 140W-V Rail Road | Used Wheeled Excavator with rail road equipment installed, mechanical quick coupler, auxiliary lines, 3.5 boom and 2.3m stick, check valves, Prolec height limiting system and rear view camera. Equivalent to a Doosan DX RR. CE marked: Yes EPA marked: No 56 Inspection points Ci2hg38lnn 46 Approved 10 Imperfections ...

Listing

Garbsen

1199 km

Doosan G 30 NXP

2022

used

€25,900

Call

LPG Forklifts Capacity: 3000kg Load Centre: 500 Lift height: 3500mm Overall Length: 2665mm Overall width: 1290mm Closed height: 2295mm Overall weight: 4490kg Mast type: Standard Fork length: 1200mm YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Cke2dgxgkp Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedienungsanleitung und...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

1782 km

CNC lathe

DOOSAN PUMA TT 1800 SY

2013

good (used)

Call

Catalog No. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Made in: 2013 Characteristic: Control system: FANUC 31i-B Total hours: 8981 h 08ouvsf7 Maximum-turning length: 600 mm Turning diameter over bed (max): 300 mm Turning diameter over cross slide (max): 230 mm Number of spindles: 2 pcs Maximum power of the main spindle: 22 kW Diameter of the spindle bore: 76 mm Maximum spindle speed: 5000 1/min Workpiece weight: 120 kg Max. bar diameter: 65 mm Axis X1/X2: 165/190 mm Axis Z1/Z2: 7...

Listing

Engelskirchen

1097 km

CNC heavy duty lathe

DOOSAN PUMA 700 LY

2012

good (used)

Call

swing over bed 1140 mm swing over carriage 1000 mm max. turning diameter 750 mm turning length 3200 mm chuck seize 610 mm main spindle: spindlediameter in front bearing 240 mm spindle bore 181 mm spindle speed range 0 - 1500 U/min spindle drive 45/37 KW torque 6605 Nm transmission steps III Y axis +- 100 mm turret: no.of tools in turret 12 spindle taper 85 P BMT powered tool holder speed 3000 U/min spindle drive 11 KW torque 140 Nm tailstock: quill diame...

Listing

Crailsheim

1356 km

Doosan D55C-7

2016

used

Call

Diesel Forklift Ciuirfmwkh Capacity: 5500kg Lift height: 3955mm Overall Length: 3290mm Overall width: 1430mm Closed height: 2960mm Overall weight: 8300kg Mast type: Duplex Fork length: 1780mm YOM: 2016 Condition: very good Engine: Doosan Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 300-15/8.00 Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 7.00-12/5.00 Side Shift, Fork positioners, 3rd valve, 4th valve, - Halbkabine - Anhängerkupplung - Spiegel - STVO - Arbeitss...

Listing

Dinslaken

1037 km

Front fork lift

Doosan B15R 5

2010

used

€9,890

Call

Listing

1293 km

Tracked Excavator

Doosan DX 450LC

2001

used

€33,900

Call

We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy: Cbttvkeyum • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2001 - Doosan DX 450LC - Used tracked excavator with 7.1m boom length, 3.4m stick length, 2 auxiliary lines and 217kW Daewoo DV15T engine. CE marked: Yes EPA marked: No 49 Inspection points 28 Approved 11 Imperfections 10 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final pri...

Listing

Garbsen

1199 km

Doosan G 25 NXP

2022

used

€23,900

CNC Turning- and Milling Center

Call

LPG Forklifts Capacity: 2500kg Load Centre: 500 Lift height: 4710mm Free lift: 1300mm Overall Length: 2600mm Overall width: 1290mm Closed height: 2155mm Overall weight: 4126kg Mast type: Triplex Fork length: 1200mm Kcptsj YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedienungs...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

1782 km

CNC lathe

DOOSAN LYNX 220 LSYC

2018

good (used)

Call

Catalog No. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Made in: 2018 Characteristic: Control system: DOOSAN FANUC-i Total hours: 8205 h Maximum-turning length: 510 mm Max. turning diameter: 300 mm Turning diameter over bed (max): 600 mm Turning diameter over cross slide (max): 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feedrate in the Z axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum power of the main spindle: 15 kW Diameter of the...

Listing

Hattingen

1070 km

DOOSAN PUMA 240 MB

2006

used

Call

swing over bed 550 mm max. turning diameter 300 mm max. turning length 513 mm travel -x axis 205 mm travel -z axis 580 mm control FANUC 21i - TB Spindle speed 4.500 min -1 number of tapers in turret head 12 Dimensions (L x W x H) 2.997 x 1.592 x 1.740 mm weight of the machine 4.040 kg CNC Turning- and Milling Center DOOSAN - Puma 240MB Zlkqwy0l The machine is in a very well-maintained condition and can be inspected at any time under power. A machine video will be shared on request. Plea...

Listing

Root

1371 km

CNC vertical milling center

DOOSAN DNM 400

2008

good condition (used)

Call

Tool holder come with machine. Machine vices and cutting tools and inserts not come. Any parts shown by hand not come. Cir8ssdsoc Technical details are in pdf file.

Listing

DOOSAN DN Solution Fanuc Doosan PUMA AW660

Villingen-Schwenningen

1313 km

CNC TURNING CENTER DOOSAN PUMA FANUC

DOOSAN DN Solution Fanuc Doosan PUMA AW660

2015

excellent (used)

Call

gebr. horizontal turning center also for aluminum wheel machining. Main features: - Extremely rigid cast bed - High torque on the main spindle - Slant bed design with sliding guide system - Wheel sizes up to 28 inches - Gloss turning possible with PUMA AW 660 - 12-slot tool turret with direct mounting - high operating comfort - powerful main spindle with high torque - high cutting capacity and reliability. Xszr7ivv TECHNICAL DATA Spindle hours 2499 Max. Turning diameter 650 (25,6) mm (inch) Max...

Listing

Bonneville

1331 km

CNC LATHE

DOOSAN MX2000 ST

2007

good condition (used)

Call

MAIN SPINDLE - Bar diameter : 65 mm - Max swing over bed : 750 mm - Max swing over slide : 600 mm - Turning diameter : 210 mm - Max turning length : 1520 mm - Spindle bore : 66 mm - Spindle nose : A2-6 - Spindle speed : 5000 rpm - C axis: 360 ° indexing increment 0.001 ° SUB SPINDLE - Spindle nose : A2-6 - Spindle speed : 5000 rpm TOOL STORE - Tool changer : 24 tools Bt8tjqu2iu - Maximum tool diameter : 90 mm - Maximum tool length : 300 mm - Maximum tool weight : 8 Kg - Tool-to-tool change time ...

Listing

Garbsen

1199 km

Doosan G 30 NXP

2022

used

€23,900

Call

LPG Forklifts Capacity: 3000kg Bmriqzvom Load Centre: 500 Lift height: 3500mm Overall Length: 2665mm Overall width: 1290mm Closed height: 2295mm Overall weight: 4541kg Mast type: Standard Fork length: 1200mm YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedienungsanleitung und ...

Listing

Weyhe

1138 km

High Lift stacker

Doosan LSM 12 N-7 / NEU

2022

used

€3,999

Call

High Lift stacker Capacity: 1200kg Lift height: 2900mm Closed height: 1930mm Mast type: Standard Fork length: 1150mm YOM: 2022 Condition: New Transmission: Automatik Bereifung vorne Typ: Polyurethane Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Polyurethane Bereifung hinten Zustand: 80 - 100% Description: Neugerät inklusive Herstellergarantie, Gerne organiseren wir Ihnen einen kostengünstigen Transport. Nckia32u

Listing

Root

1371 km

CNC Lathe

DOOSAN QL 200 H

2005

good condition (used)

Call

Listing

Bonneville

1331 km

CNC LATHE

DOOSAN PUMA 5100 LMB

2019

excellent (used)

Call

MAIN SPINDLE - Bar diameter: 165.5 mm - Max swing over bed : 900 mm - Max swing over slide : 690 mm - Turning diameter: 650 mm - Maxturning length: 2020 mm Cox2mnmb9o - Spindle nose: A1-15 - Spindle speed: 1500 rpm - Spindle power: 45/37 kW - C axis: 360° indexing increment 0.001° TAILSTOCK - Stroke: 1000 mm - Diameter of the quill: 120 mm - Quill stroke: 120 mm TURRET - Number of positions: 12 - Number of motorized positions: 12 - Axis stroke: X=2150 - Z=362 mm - Rapid advances: X=16 - Z=20 m/m...

Listing

Garbsen

1199 km

Doosan D 30 NXS

2022

used

€29,900

Call

Diesel Forklift Capacity: 3000kg Load Centre: 500 Lift height: 3500mm Free lift: 152mm Overall Length: 2750mm Overall width: 1295mm Closed height: 2430mm Overall weight: 4750kg Mast type: Standard Fork length: 1200mm YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedienungsanlei...

Listing

Garbsen

1199 km

Doosan D 30 NXS

2022

used

€32,800

Call

Diesel Forklift Capacity: 3000kg Load Centre: 500 20sxcjpj Lift height: 4730mm Free lift: 1300mm Overall Length: 2750mm Overall width: 1295mm Closed height: 2180mm Overall weight: 4750kg Mast type: Triplex Fork length: 1200mm YOM: 2022 Condition: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Super Elastic Bereifung hinten Zustand: 80 - 100% Description: Neugerät. Die angebotene Maschine wird geliefert incl. gültiger CE Dokumentation, Bedien...

Listing

Garbsen

1199 km

Doosan D 30 S-9

2021

used

€32,800