5-axis universal machining center

DMG MORI DMU 65 monoBLOCK

Condition: good (used), Year of construction: 2014, Operating hours: 34,025 h, Functionality: fully functional, Machine/vehicle number: 1214 001145 3, Travel distance X-axis: 735 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 560 mm, Nominal power (apparent): 44 VA, Controller manufacturer: Heidenhain, Controller model: iTNC 530 (HSCI), Workpiece height (max.): 500 mm, Workpiece diameter (max.): 840 mm, Workpiece weight (max.): 1,000 kg, Total height: 3,000 mm, Total length: 5,200 mm, Total width: 3,000 mm, Rotational speed (min.): 18,000 rpm, Overall weight: 10,700 kg, Number of slots in tool magazine: 30, Input voltage: 400 V, Equipment: Chip Conveyor, 3-axis milling machine ! Condition: no damage that impairs the function, only normal age-related signs of use of a milling center present, network interface present, chip conveyor etc. included, viewing window replaced in May 2022 Tool magazine/changer: Vertical chain magazine with 30 places Tool holder: SK 40 Measuring probe: Heidenhain laser measuring probe included Weight: 10.7 tons Supply voltage: 400 V / 50 Hz Connected load: 44 kVA Machine with cooling lubricant system: 500 liters / no emulsion separator for cooling lubricant mounted on top of the machine, scraper belt conveyor Other: Installation area at our premises currently approx.: 5.2 m x 3.0 m / height max. 2.9 to max. 3.0 m Bolpkbfa2Pl Machine interface for automation available, chip conveyor etc. included

Condition: excellent (used), Year of construction: 2014, Operating hours: 11,000 h, Functionality: fully functional, Travel distance X-axis: 750 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 560 mm, Rotational speed (max.): 18,000 rpm, Number of slots in tool magazine: 60, The machine was accepted according to the IB protocol. Reason for delivery: Departmental task of a paver TECHNICAL DETAILS Control: Heidenhain iTNC 530 HSCI Number of axes: 5 Traverse paths X-axis travel: 750 mm Travel distance Y-axis: 650 mm Z-axis travel: 560 mm Work table NC milling/rotary table: available Pallet dimensions: Ø650 mm Table dimensions: 800 x 650 mm Spindle Spindle speed: max. 18,000 rpm Coolant supply through the spindle: 40 bar Updsfzn3St Tool system Tool holder: SK-40 Number of tools in the magazine: 60 EQUIPMENT - Electronic handwheel Heidenhain HR 410 - Chip conveyor - Oil mist extraction - Heidenhain infrared probe - Internal coolant supply 40 bar - 600 liter coolant tank with paper band filter - Flushing gun - Outside and inside air

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Travel distance X-axis: 1,250 mm, Travel distance Y-axis: 710 mm, Travel distance Z-axis: 710 mm, Vertical machining center Manufacturer: DMG Type: DMU 100 monoBLOCK Machine no.: 1160 000 309 3 Year of manufacture: 2008 Control: Heidenhain ITNC 530 Axes: 3 Travels X: 1250 mm Y: 710 mm Z: 710 mm Tool changer: 32 places SK 40 Speed: 12,000 rpm Drive power: 15 KW (40%ED) / 100 KW ( 100%ED) Uszzg0Rph9 - New milling spindle by DMG!!! - Rigid table 1500mm x 800mm - Chip conveyor - Measuring probe Heidenhain TS649 - Tool measurement Heidenhain TT130 - Production package 40bar/23L/min, tank 600L, paper belt filter - IKZ - Electronic handwheel - Operating mode 4 Subject to errors and prior sale.

Operating hours: 22 h, Condition: used, Machine/vehicle number: 12430008873, with rotary table Ø 650 mm, working area: (XYZ): 750x650x450 mm, up to 1,000 kg, 60-position tool changer HSK63, control: HEIDENHAIN TNC640, chip conveyor, filter system Bvcbvckyiw

Condition: ready for operation (used), Year of construction: 2021, Operating hours: 3,335 h, General Data Measurements width 850 mm Measurements depth 950 mm Measurements height 650 mm Control Unit Brand HEIDENHAIN Model TNC640 with CELOS 21.5" ERGOline® Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper HSK-A 63 DIN 69893 Movement X-Axis Movement 950 mm Bpudes3Pm3 Y-Axis Movement 850 mm Z-Axis Movement 650 mm Additional Equipment Cooling/chip removal - Manufacturer's package, includes: 600 liter coolant tank, cooling through spindle 40 bar 23 l/min with pump cooling around the spindle, Manual coolant flushing pistole, M function switchable through spindle, air cooling, Mechanical oil mist and emulsion separator This DMG MORI DMU 95 monoBLOCK was manufactured in 2021. It features a speedMASTER® 20,000 rpm motor spindle, a 60-space chain box with double lever changer, and a NC tilting rotary table. Equipped with HEIDENHAIN TNC640 control and a comprehensive cooling/chip removal system. Ideal for complex machining tasks, the DMG MORI DMU 95 monoBLOCK vertical machining centre we have for sale is a robust addition to any production line. Contact us for further details. Application Types Milling

Condition: good (used), Year of construction: 2015, Universal machining center Machine type: DMG DMU 75 monoblock Control: Heidenhain TNC 640 Year of construction: 2015 TECHNICAL DATA: 5-axis simultaneous Travels: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm B-axis: + / - 120° C-axis: 360° Number of controlled axes: 5 Speed range: 20,000 1/min. Drive power: 35 / 25 kW Tool holder: HSK 63 Tool changer Dpikcr Tool places: 60 NC swivel rotary table: Ø 650 Table size: 800 x 650 mm Max. Table load: 600 kg Connected load: 48 kVA KW Machine weight: 12,000 kg Space requirement (LxWxH): 3.2 x 2.62 x 2.93 m Equipment features: Chip conveyor Internal cooling (IKZ): bar Coolant tank: 600 l Measuring probe Operating mode: 4

Operating hours: 27 h, Condition: used, Machine/vehicle number: 12430007063, with rotary table Ø 650 mm, working area: (XYZ): 750x650x450 mm, up to 1,000 kg, 60-position tool changer HSK63, control: HEIDENHAIN TNC640, chip conveyor, filter system Bvcaxivfym

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, CNC controller: SIEMENS 840D sl Operate Axes X-axis travel mm: 650 Y-axis travel mm: 520 Z-axis travel mm: 475 Swivel range degrees: -35° + 110° Distance spindle nose - table surface mm: 150 - 625 Feed rates m/min: 42 Rapid traverse m/min: 42 Worktable Table dimensions mm: ø630x500 Max. workpiece weight kg: 300 Spindle Spindle speed rpm: 20 - 20.000 Spindle drive power kW: 35/25 (40/100% ED) Spindle torque Nm: 130/86 (40/100% ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A63 Tool magazine slots: 60 Max. Tool Diameter With free neighboring places mm: ø130 With occupied neighboring places mm: ø80 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Brmcmzces7U Infrared probe Rotating inspection windows Rinsing gun Signal lamp High pressure pump Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET Electrical cabinet active cooling unit Spindle active cooling unit MPC – Machine Protection Control Paper band filter Machine running times Under power: 13.190 Spindle Working: 6.845

Condition: excellent (used), Year of construction: 2013, 5-axis CNC machining center DMG MORI DMU 50 ECOLINE 2013 E2Ptrri - Number of axes : 5 MILLING SPINDLE - Tool holder : BT40 - Spindle drive power : 13 [kW] - Spindle speed : 10,000 [rpm] LINEAR AXES - Traverse path X/Y/Z axes : 500 / 450 / 400 [mm] - Rapid traverse speed (X/Y/Z) : 24,000 [mm/min] DRIVEN AXIS B - Travel : -5 / +110 [degrees] - Minimum resolution : 0.001 [degrees] DRIVEN AXIS C - Travel : 360 [degrees] - Minimum resolution : 0.001 [degrees] TOOL CHANGER - Type of tool changer : Loading arm - Number of tools in the magazine : 30 TABLE - Table size : Ø630 x 500 [mm] - Max. table load : 200 [kg]

Condition: good (used), Year of construction: 2013, Operating hours: 11,300 h, Functionality: fully functional, DMG MORI DMU 50 5x simultaneous machining center (2013) Manufacturer: DMG Mori Type: DMU 50 Simultan year of construction 2013 Condition: good, used Switch-on hours: 29.563h Ucwzoxle8J Spindle hours: 11.309h Control: Heidenhain ITNC 530 Travel X- 500mm Y- 450mm Z- 400mm Swivel rotary table 630 x 560mm including option for simultaneous milling Spindle speed 20 - 18,000 rpm SK40 DIN 69871 Rapid traverse 24m/min Electronic handwheel Infrared measuring probe Tool measurement TT140 3D-Quick-Set Chip scraper conveyor belt Spray gun documentation approx. 27 tool holders ZeroClamp base plate type: 10089

Condition: ready for operation (used), Year of construction: 2014, Operating hours: 4,311 h, General Data Measurements width 1200 mm Measurements depth 1050 mm Measurements height 2000 mm Control Unit Brand DMG MORI Model CELOS (SIEMENS 840D sl) Interface 21.5“ ERGOline Control CNC main language German (English, Italian) CNC language customizable Yes Main Drive Spindle speed range 14000 1/min Spindle motor power 14 kW (100% ED) Tool taper HSK64 Gxc0Sny Laser power 2.5 Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Table Outer length 800 mm Outer width 650 mm Tools Slots in storage 60 Type of tool holder HSK64 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Inner cooling system 40 bar, 23 l/min Scraper belt chip conveyor with coolant system 600 liters, paper belt filter Infrared measuring probe Renishaw OMP 60 Version for SK 40 (the probe is automatically inserted into the work spindle from the tool magazine) Rinsing gun with pump 2 bar/40 l/min Oil/emulsion mist separator Tool measurement in the Blum Laser work area MPC Machine Protection Control & 3D quickSET Surcharge for powder feeder Twin System Suction unit with secondary filter stage electronic handwheel Siemens 840D This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW laser power. Next to internal coolant supply (IKZ) it comes with Renishaw measuring probe and Blum tool measurement option. Furthermore it is appreciated for its generously sized work area that is easily accessible, along with travel dimensions of 650 × 650 × 560 mm (X / Y / Z). It is a supremely adaptable 5-axis machine suitable for a wide array of laser and milling tasks, delivering consistently high-quality results without compromise. Application Types Milling

Condition: excellent (used), Year of construction: 2021, DMG Mori DMU50 3rd Generation NEW Stealth Design Technical data Production package with automation interface and PH Cell 300 Cccqqi8 - Celos with Heidenhain iTNC640 - Travel X 650 mm Y 520 mm Z 475 mm - Motor spindle 20,000 1/min - Chain magazine 120 magazine positions HSK63 with double gripper - NC swivel rotary table Table top B-axis: -35°/+110° - Infrared measuring probe TS460 - Blum laser measurement in the work area - 3d Quickset - ATC ( Application Tuning Cycle ) - MPC Machine Protection Control - IKZ with 40 bar and 600l tank - Rotating inspection slide - Chip spray gun - Oil mist extraction - Air blast through the spindle - Signal lamp - Operating mode 4 - Electronic handwheel - Tropicalization package for the spindle - Erowa clamping system and interface - PH Cell 300 o 2 shelves with 4 storage compartments for 3 pallets o Set-up station o 2 pallets o Erowa MTS pallets approx. 400mm x 400mm The machine is in very good condition and has been measured according to the new machine protocol Subject to prior sale and all information given here is without guarantee All prices plus VAT applicable on the day and our terms and conditions apply

Condition: as good as new (ex-display), Year of construction: 2010, liter capacity 63 l tank 250 l E2Po7Mu Pressure power 1,5 (max. 2,5) bar total power requirement - kW weight of the machine ca. 100 kg dimensions of the machine ca. 1,4*0,6*1 m

Condition: new, Year of construction: 2023, A new DMG MORI DMU 50 3rd generation chip conveyor is for sale. Uqukev7Yob

Condition: like new (used), Year of construction: 2023, Operating hours: 276 h, Functionality: fully functional, Machine/vehicle number: 14505803784, Travel distance X-axis: 650 mm, Travel distance Y-axis: 520 mm, Travel distance Z-axis: 475 mm, Rapid traverse X-axis: 42,000 mm/min, Rapid traverse Y-axis: 42,000 mm/min, Rapid traverse Z-axis: 42,000 mm/min, Controller manufacturer: Heidenhain, Controller model: CELOS mit HEIDENHAIN TNC640, Workpiece height (max.): 600 mm, Workpiece diameter (max.): 630 mm, Workpiece weight (max.): 300 kg, Total height: 2,750 mm, Total length: 2,850 mm, Total width: 2,350 mm, Table load: 300 kg, Rotary table diameter: 630 mm, Rotational speed (max.): 30 rpm, Overall weight: 7,500 kg, Spindle speed (min.): 20 rpm, Spindle speed (max.): 20,000 rpm, Operating hours of spindle: 112 h, Coolant supply: 80 bar, Distance table to spindle center: 150 mm, Distance table center to spindle nose: 625 mm, Spindle motor power: 16,000 W, Number of spindles: 1, Number of slots in tool magazine: 60, Tool length: 300 mm, Tool diameter: 80 mm, Tool weight: 8,000 g, Input voltage: 400 V, Type of input current: three-phase, Equipment: Chip Conveyor, Documentation/Manual, Rotational Speed Infinitely Variable, Leasing takeover also possible! If you take over the leasing, we will add the accessories to the value of 29'000EUR (net). If you buy, we can include the accessories in the price negotiation. INCL: Automation interface in version DECKEL MAHO Standard consisting of: - Interface (Profibus) via M65 - Automatic loading door - Work table with 4-channel rotary feed-through Infrared measuring probe - Renishaw PP 60 optical (OMP 60) Gpeigo - Laser tool measurement Blum DIGILOG permanently mounted on machine stand - Tool length and diameter measurement - Automatic cleaning via external blast air - Calibration mandrel with tool holder - 3D quickSET, toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - MPC - Machine Protection Control Machine protection through quick shutdown

Condition: good (used), Year of construction: 2013, Operating hours: 10,000 h, im Jahr 2014 in Betrieb Wir haben Werkzeuge Schraubstöcke und andere Artikel mit der Maschine zu verkaufen Maschine und Ausstattung: DMU 75 monoBlock mit Heidenhain iTNC530 Werkzeugaufnahme HSK 63 Motorspindel 18.000rpm Werkezugwechsler mit 60Platz Kettenmagazin NC-Schwenkrundtisch MPC Maschine Protection Control Betriebsart 4 3D Quickset Messtaster Kühlung Kühlmittelzufuhr durch die Spindel bar Tankinhalt Liter: 600 Späneförderer Bandfilteranlage mit IKZ 600L 40 Bar Geometrisch Top Vollständig geprüft durch DMG im Jahr 2024 . Geometrie und gewartet. absolut frei von MängelnTechn. Daten: Motorspindel Drehzahl 18.000 U/min Werkzeugaufnahme HSK 63 NC-Schwenkrundtisch: A-Achse Positionierung 0,001° Schwenkbereich -120/+120° C-Achse Positionierung 0,001° Schwenkbereich 360° Aufspannfläche Rundtisch ø650 mm Aufspannfläche Gesamt 650 x 800 mm Allgemein: Werkzeugmagazin: 60 Plätze Kettenmagazin Eilgang in X/Y/Z: je 40 m/min Tischbelastung (max.): 600 kg Maschinenlaufzeit: Bkrdxsviw3 Stunden unter Strom: 24.245 Spindelarbeitszeit: 12123 Grundmaschine: Abmessungen/ Gewicht Länge mm: 3.567 Breite mm: 2.415 Höhe mm: 2.897 Gewicht kg: 12.100

Condition: ready for operation (used), Year of construction: 2016, Control Unit Dppxh7 Brand Siemens Model 840D sl FD Operate Main Drive Spindle speed range 1000 Tool taper HSK-A 63 Number of axis 5 Movement X-Axis Movement 735 mm (650 mm) Y-Axis Movement 650 mm Z-Axis Movement 560 mm Media Internal cooling Yes Additional Equipment 2 X laser safety windows (double window) CELOS® with Siemens 840D sl FD Operate including 21.5 ERGOline® Control Paper belt filter Energy measuring device for CELOS This 5-axis DMG MORI Lasertec 65 universal machining centre was manufactured in 2016. It features a motorized spindle with a speed of 1,000 rpm, a HSK-A 63 tool holder, and a 30-position kettle magazine. The NC swivelling rotary table supports milling and turning with a permissible load of 600 kg. Additional features include a link belt chip conveyor with a 600-liter coolant system and an external coolant supply. For more information about this universal machining centre, please reach out to us. Application Types Milling

Condition: like new (used), Year of construction: 2023, CELOS with Heidenhain TNC 640 Production package with automation interface - Travel X 750 mm Y 650 mm Z 560 mm - Motor spindle 20,000 1/min - Chain magazine 120 magazine positions HSK63 with double gripper - NC swivel rotary table Table top C-axis: Ø 650 integrated in fixed table 800 mm x 650 mm - Renishaw PP60 measuring probe - Blum laser measurement in the work area - 3d Quickset - ATC ( Application Tuning Cycle ) - MPC Machine Protection Control - IKZ with 40 bar and 650l tank - Rotating inspection slide - Chip spray gun - Oil mist extraction - Air blast through the spindle - Signal lamp - Operating mode 4 - Accuracy package Unz7Ovpfdn The machine is in very good condition and has been measured according to the new machine protocol

Condition: excellent (used), Year of construction: 2014, Travel distance X-axis: 800 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 600 mm, Equipment: Chip Conveyor, Rotational Speed Infinitely Variable, Machine details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Technical details x-travel 800 mm y-travel 650 mm z-travel 550 mm Dpe7Nb control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360 ° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg change-time chip to chip approx. 5.9 sec feed speeds max. 30,000 mm/min rapid traverse 80 m/min total power requirement 50 kW weight of the machine approx. 12.0 t dimensions of the machine approx. 4.5 x 4.0 x 2.5 m accessories Documents Chip conveyor Coolant system high pressure coolant through spindle coolant electr. hand wheel NC-Rotary Swiveling Table test probe Additional information CNC - MachiningCenter Vertical DMG DECKEL MAHO - DMU 80 eVolution LINEAR CNC HEIDENHAIN ITNC 530 HSCI - 5 Axis

Condition: excellent (used), Year of construction: 2018, Travel distance X-axis: 650 mm, DMG DMU 50 3rd Gen 5-Axis CNC Universal Milling Machine with swivel rotary table, Fitted with Celos Siemens control, PH150 10- Pallet Pool, 15,000 RPM, Spindle and in super condition! 5-Axis Machining with up to 20,000 rpm speedMASTER 15,000 rpm Swivel Rotary Table for 5-Axes Simultaneous Machining Table load up to 300 kg Swivel area of the B-axis -35°/+ 110° for highest flexibility Cooled table bearings for highest precision Tool magazine with 60 pockets Loading of tools from the front even during machining direct driven ball screw drives direct path measuring systems in all axes Fitted with Renishaw probing, extended 60 tool ATC and DMG PH 170 10 pallet system, HP coolant and swarf management system. Bxuqdbwooa XYZ strokes: 650x520x475mm YOM 2018

Condition: excellent (used), Year of construction: 2013, Control system: - Control Heidenhain Millplus iT Work spindle: - Tool holder SK40 - Speed range max. 12000 rpm. Bnu3Wkiryyk Milling head: - Controlled B-axis 90° swiveling Table design: - NC swivel rotary table C-axis 360° - max. table load 1800kg.

Condition: good (used), Year of construction: 1998, Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Feed speeds in the C/B axes: 180°/360° Work table dimensions (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Capacity of the tool magazine: 30 pcs. Bm98Cwfl0Pv Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg

Condition: ready for operation (used), Year of construction: 2000, Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Additional Equipment Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg Main Drive Tool taper SK 40, SK 50, HSK-E50, HSK-A63 Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm A-Axis Movement +/- 45° / 30° C-Axis Movement n x 360° Tools Max weight 10 / 20 kg Max tool diameter 100 / 110 mm Max tool length 450 mm Additional Equipment Dpsryf Tool Changer with Magazine: SK 40 / SK 50: Magazine Capacity: 30 / 60 / 120 / 180 tools, HSK-E 50: Magazine Capacity: 30 tools Total Weight in Magazine: 100 / 200 / 400 / 600 kg (SK 40), 200 / 400 / 800 / 1,200 kg (SK 50) Max. Rotational Speed: 8.1 U/min Feed: 2,900 °/min// Max. Rotational Speed: A-Axis: 5.6 U/min, C-Axis: 7.1 U/min Tool Clam Swivel Range A-Axis: +/- 45° / 30° // Rotary Range C-Axis: n x 360° Tool Interface: Tapered Shank SK 40 or SK 50 according to DIN 69871, Hollow Shank HSK-E50 or HSK-A63 according to DIN 69893 T-Slot Distance (Radial): 22.5° / T-Slot Width: Direct T-Slot: 18 H7 mm, Clamping Slot: 18 H11 mm Center Bore Diameter: Ø 50 H6 mm Permissible Load on Work Tables: Fixed Table: 2,500 kg, NC Rotary Table: 2,000 kg, NC Swivel Rotary Table: 1,000 kg This 5-axis DMG MORI DMU 125 milling machine was manufactured in 2000. It features a robust spindle system with options for SK and HSK tool interfaces, supporting diverse machining needs. The machine offers a large working area with X, Y, Z travel ranges of 1250 mm, 880 mm, and 800 mm respectively, and can handle significant loads on its various tables. Ideal for complex and precise machining tasks, the DMG MORI DMU 125 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2010, Condition: excellent (used), Machine-Details Stock-No. 1105-03891 Type of machine Machining Center - Universal Make DECKEL MAHO DMG Type DMU 50 Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE 8Mf8Rz2Tqt Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm turning speeds 10000 1/min tool taper SK 40 control MILL PLUS IT U 600 tool change unit 30 rapid traverse 24 m/min spindle 35/ 25 kW total power requirement 70 kVA weight of the machine ca. 5.5 t Additional information 5-axis SIMULTAN machining center 2-axis NC-round-swivelling TABLE coolant supply el. handwheel, chipconveyor approx.20.000 hours "machine on", approx. 2.000 hours "spindle running" NEW SPINDEL IN 2020 VERY NICE CNC HEIDENHAIN MILL PLUS

Year of construction: 2013, Condition: excellent (used), Machine-Details Stock-No. 1105-03930 Type of machine Machining Center - Universal Make DECKEL MAHO DMG Type DMU 50 ECOLINE 5-Achsen 3+2 Year of manufacture 2012 Type of control CNC Storage location FRANKREICH Rypxgjqi Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 500 mm y-travel 420 mm z-travel 380 mm control HEIDENHAIN TNC 620 tool adaptor SK 40 turning speeds 8000 1/min table surface area 500 X 380 MM mm tool change unit 20 pos. total power requirement 40 KVA 63 A Absich Additional information CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device, cabin,