5-axis horizontal machining center

Deckel Maho DMC 80 H

Condition: like new (used), Year of construction: 2009, Operating hours: 47,443 h, Travel distance X-axis: 800 mm, Travel distance Y-axis: 800 mm, Travel distance Z-axis: 800 mm, Rapid traverse X-axis: 60 mm/min, Rapid traverse Y-axis: 60 mm/min, Rapid traverse Z-axis: 60 mm/min, Feed length X-axis: 800 mm, Feed length Y-axis: 800 mm, Feed length Z-axis: 800 mm, Feed rate X-axis: 60 mm/min, Feed rate Y-axis: 60 mm/min, Feed rate Z-axis: 60 mm/min, Torque: 980 Nm, Controller manufacturer: Siemens, Controller model: 840D-Powerline, Total height: 2,900 mm, Total length: 4,950 mm, Total width: 5,060 mm, Table width: 800 mm, Table length: 630 mm, Table load: 1,000 kg, Rotational speed (max.): 8,000 rpm, Overall weight: 14,000 kg, Spindle speed (max.): 10,000 rpm, Operating hours of spindle: 22,963 h, Coolant supply: 40 bar, Spindle motor power: 32,000 W, Number of slots in tool magazine: 180, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º E2Plim3 Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: good (used), Year of construction: 2006, 5-axis machining center Manufacturer: Deckel Maho Type: DMC 80 U duoBlock Year of construction: 2006 Control: Siemens 840D Powerline with Shop Mill interface Travel X/Y/Z: 800 x 800 x 800 mm Pallet carrier as C-axis (infinitely variable) B-axis (stepless) Pallet size: 800 x 630 mm 2 pallets Spindle 20 - 10,000 rpm Tool changer: 60 Interface: HSK A 100 IKZ 70ig bar Coolant tank with paper band filter: approx. 600 liters C92H0Bi Rinsing gun Chip conveyor Bed flushing 27082024ä

Condition: excellent (used), Year of construction: 2009, Control: Heidehain iTNC 530 Traverse paths: X-axis 650 mm Y-axis 700 mm Z-axis 700 mm B-axis 360 C° Tool holder: 40 ISO Tool magazine: 120 compartments Speed: 12,000 rpm Accessories - Chip conveyor - Coolant system with filter 600 L and 40 bar - 2-fold pallet changer - 3-D measuring probe (Renishaw) - Blum laser - New Weiss spindle in 2022 Cr7Hbosur Garwels machines and service The right choice We would be happy to provide you with a quote for our additional services - transportation - Installation of the machine - Commissioning - Instruction We are exactly the right contact for - repair - maintenance - service Please also visit our website www garwels de

Condition: ready for operation (used), Year of construction: 2006, Operating hours: 53,010 h, Functionality: fully functional, Travel distance X-axis: 630 mm, Travel distance Y-axis: 800 mm, Travel distance Z-axis: 680 mm, Equipment: Chip Conveyor, Documentation/Manual, Traverse paths X-630mm, Y-800mm, Z-680mm, spindle speed 18,000 rpm, B-axis 360°, tool holder HSK63, pallet 500mm x 500mm, tool magazine 120 places, IKZ, belt filter, chip conveyor, CNC control Siemens 840D powerline, spindle cooling Bogij70Oqw

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 560 mm z-travel 560 mm size of pallet 2 x 500 x 400 mm spindle taper SK 40 spindle turning speed - stepless max. 8000 U/min feed X/Y/Z-axis 1 - 60.000 mm/min. feed B-axis 9.250 °/min rapid traverse X/Y/Z axis 60 m/min feed power X/Z axis 9.600 N B-axis 360 x 0,001 ° ATC 80 Pos workpiece diameter 90 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 350 mm Dpjmor weight of tools max. 12 kg control SIEMENS SINUMERIK, 840 D internal coolant system feed 40 bar total power requirement 80 kVA weight of the machine ca. ca. 16 t Accessories: measuring probe RENISHAW, MP 10; electron. handwheel, chip conveyor, coolant

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm Btsyijrz33 z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 28,815 h, Main Drive Spindle speed range 8000 (standard), 15000 (optional) Spindle motor power 13 kW (S1), 20 kW (S6) Tool taper SK 40, HSK 63 Bsx9Offu7M Movement X-Axis Movement 600 mm Y-Axis Movement 560 mm Z-Axis Movement 560 mm 1-AXIS Movement 360 Table Outer length 400 MM Outer width 500 MM Tslots size x 14H12 mm Table load 350/600 kg Additional Equipment Multiple tool magazine options Advanced tool handling and balancing features High-precision measurement system Efficient internal coolant supply (optional) This 4-axis DECKEL MAHO DMC 60 H Hy Din horizontal machining center was manufactured in 2001. It features a robust direct drive motor with speeds up to 15,000 rpm and a torque of up to 191 Nm. The machine includes a versatile tool magazine with capacities ranging from 40 to 180 tools and a maximum tool weight of 12 kg. Ideal for complex machining tasks, the DECKEL MAHO DMC 60 H Hy Din machine we have for sale. Contact us for further details. Application Types Milling

Condition: used, Pallet with T-slots Easnr82 suitable for DMC 100 H several pallets still available

Condition: excellent (used), Year of construction: 2008, Control system: Siemens Sinumerik 840 D Travels: X-axis 800 mm Y-axis 1,050 mm Z-axis 850 mm Fixture: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Max. Workpiece diameter: 900 mm Max. Workpiece height: 1,450 mm Accessories - Chip conveyor - Coolant device with deep-bed filter - Coolant supply through the spindle - 2-fold pallet changer - 3-D measuring probe (Renishaw) - Blum laser Eigx2Qk9Q - Extraction system Garwels machines and service The right choice We would be happy to provide you with a quote for our additional services - transportation - Installation of the machine - Commissioning - Instruction We are exactly the right contact for - repair - maintenance - service Our team is ready to help you. Please also visit our website www garwels de

Condition: used, Year of construction: 2002, x-travel 800 mm y-travel 700 mm z-travel 600 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 19 / 28 kW max. Torque 121 Nm tool taper SK 40 DIN 69871 b - axis 0,001 ° pallet changer: numbers of pallets 2 size of pallet 800 x 630 mm pallet diameter Ø 800 mm max. table load 800 / (1.600) kg rotatable C: 360 ° resolution 0,001 ° max. table speed 13,6 U/min T-slots 50 H6 tool magazin: number of toolpositions 60 pos. tool taper SK 40 DIN 69871 max. tool diameter 100 mm max. tool-dia with free toolbox 160 mm max. tool length 350 / 315 mm max. tool weight 10 kg feeds: feed speeds 20 - 15.000 mm/min rapid traverse 50 m/min Dozcv9 total power requirement 59 kVA weight of the machine ca. 10 t dimensions of the machine ca. 4,0 x 7,0 x 2,7 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMC 80 U hi-dyn - Swivel-Milling-Head - pallet-changer - WITHOUT clamping elements / WITHOUT pallets

Condition: used, Year of construction: 2008, x-travel:700 mm y-travel:700 mm z-travel:700 mm turning speeds:18.000 1/min max. torque on the spindle:110 / 84 Nm tool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fach Jbyxgib2N size of pallet:500 x 500 mm mm max. workpiece weight:600 kg spindle:34 / 28 kW rapid traverse:60 m/min total power requirement:68 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:9,5 x 7,5 x 3,4 m dimensions for transport:4,3 x 2,4 x 2,6 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on",

Year of construction: 2008, Condition: good (used), x-way 700 mm y-way 700 mm z-way 700 mm Total power requirement 68 kW machine weight approx. 10500 kg space requirement approx. 4300x2400x2600 mm Horizontal machining center, NC rotary table, pallet circular storage RS 10, total number of 12 pallet places, iTNC control panel for loading station, IKZ 40bar (production package), blowing air through spindle center, BA 4, Yqf9C0H clamping hydraulics 2/4 for work table and set-up station, BLUM laser, oil mist separator, TS 649 probe, Tool breakage control mechanical, SDS (Spindle Diagnostic System, flushing gun, el. handwheel, chip conveyor, approx. 112,000 h switch-on hours, approx. 79,500 spindle hours

Condition: good (used), Year of construction: 2008, Travel distance X-axis: 800 mm, Travel distance Y-axis: 810 mm, Travel distance Z-axis: 810 mm, Maho DMC 70H cover Year of construction 2008 Control system: Siemens 840D Powerline Travels X/Y/Z 800/810/810 Workpiece diameter max.: 880 mm Rapid traverse: 60m/min Tool magazine with 60 places Chain Motor spindle: SK 40 / 18,000 1/min Flushing gun 1 bar / 40 l/min Oil and emulsion mist extraction Rotating viewing window Coolant tank with 980 l IKZ with 40 bar through spindle center (paper belt filter) Operating mode 4 Signal lamp 4-color C907Xyy Electric handwheel Siemens 840D Chip conveyor 2 pallets with T-slots 500x500 mm Measuring probe Renishaw MP 10 (new)

Year of construction: 2003, Condition: used, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t Hvkl3330

Condition: repair required (used), Year of construction: 2006, Operating hours: 53,011 h, Functionality: limited functionality, Machine/vehicle number: 29210000253, Condition: The B-axis of the machine is not ready for operation. See photos for error pattern of the control system when starting up the axis. TECHNICAL DETAILS Travel in X / Y / Z: 630 / 800 / 680 mm B-axis: 360° Control: Siemens 840D Bwj7Gwlh Speed: 18,000 rpm Resolution: 0.001 mm Position tolerance X / Y / Z: 0.008 mm Position tolerance B-axis: 10" Rapid traverse in X/Y/Z: 100 m/min Power: 35 kW Torque: 119 Nm Pallet clamping area: 500 x 500 mm Workpiece weight: max. 600 kg Tool holder: HSK-A63 Tool magazine: Chain magazine, 120 stations Coolant management: IKZ system with paper belt filter and temperature control Workpiece measurement: Probe interface prepared, Renishaw Automation: Pallet changer, 2-fold MACHINE DETAILS Connected load: 75 kVA Supply voltage: 400 V, 50 Hz Switch-on time: 85,957 h Spindle hours: 53,011 h EQUIPMENT Chip conveyor Extraction: Interface prepared mechanically Electronic handwheel 4 x machine pallets Flushing gun and a comprehensive spare parts package including Kessler motor spindle, various wear parts and covers documentation Transportation note: Two complete trucks are required to collect the machine. A widenable MEGA trailer for the machine and a standard trailer for the accessories.

Year of construction: 2003, Condition: excellent (used), Technical data: Number of controlled axes: 5 number of pallets: 2 travels (X/Y/Z): 800 / 700 / 600 mm table dimension: 800 x 630 mm rotatable C: 360 CNC control: SIEMENS 840D spindle taper: HSK-A 100 drive power main spindle: 19 / 28 kW max. workpiece weight: 800 kg number of places in tool changer: 60 spindle speed: 20 - 18000 rpm dimensions (length x width x height): approx. 4600 x 2450 x 2750 mm machine weight: approx. 11,5 to Additional equipment: Dza7Jiuwr Measuring probe HEINDENHAIN TS642 The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 2006, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 11680000143, TECHNICAL DETAILS X axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B axis: 360° / 1 Control: SIEMENS 840 D SOLUTIONLINE speed: 18.000 rpm number of tools: 60 Tool holder: SK 40 Measuring probe: Infrared Renishaw PP60 Kteox2Psln MACHINE DETAILS on request EQUIPMENT Tool breakage control BLUM LAser IKS 40 bar Paper belt filter Rinsing gun Oil mist separator Electric handwheel Operating mode 4

Year of construction: 2002, Condition: used, Functionality: fully functional, Horizontal machining center with double chain magazine. TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm control: Siemens Sinumerik 840D B - axis: 360 x 0,001 ° spindle speed - stepless: 8.000 rpm feed X/Y/Z/ axis: 1 - 60.000 mm/min feed B axis: 9.250 °/min Bbnscnvuj2W rapid traverse X/Y/Z: 60.00 m/min feed force X/Z: 9.600 N Feed force Y: 8,000 N drive power 40 % ED: 20,00 KW driving power 100% ED: 13,00 kW Tool holder: SK40 Torque at 40% / 100% ED: 191 / 124 Nm Pallet size: 2x 400 x 500 mm workpiece weight: max. 600 kg tool magazine: 180 tool diameter: 90 mm tool diameter with 2 free places: 160 mm tool length: max. 350 mm Tool weight: max. 3.50 / 12.00 kg MACHINE DETAILS total power requirement: 65,00 kW machine weight: approx. 16,00 t space requirement: approx. 9.00 x 4.50 x 3.50 m EQUIPMENT Coolant system with IKZ Double chain magazine with 180 places Chip conveyor BLUM tool laser measurement electronic handwheel

Year of construction: 2006, Operating hours: 109,000 h, Condition: excellent (used), Functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min 8G7Itrpa7L Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar 30 tool pockets in the magazine are defective.

Year of construction: 2006, Operating hours: 44,825 h, Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: 1167000036, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 800 mm B-axis: 360º B-axis step size: 0.001º spindle speed: max. 10.000 rpm spindle drive power: 30/20 kW (40%/100% ED) CNC control: SIEMENS 840D Powerline ShopMill Classic number of pallets: 2 pallet dimension: 500 x 500 mm workpiece diameter: 800 mm workpiece height: max. 1.350 mm tool holder: SK-40 number of tools in magazine: 45 MACHINE DETAILS hours under power: 64.431 h Spindle working time: 44.825 h Total power consumption: 60 kVA Supply voltage: 400 V / 50 Hz Connected current: 100 A Coolant supply: 40 bar Tank capacity: 980 l EQUIPMENT - chip conveyor - rotating sight glasses B8Ijdwd3 - operating mode 4 - high pressure pump - Laser tool measurement for measuring tool length and diameter - Prepared for HEIDENHAIN probe

Year of construction: 2000, Operating hours: 47,085 h, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm Zgez0Ma z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Operating hours: 33,473 h, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS X axis: 600 mm Y-axis: 560 mm Z axis: 560 mm B axis: 360 mm Speed: 15.000 rpm Control: Siemens 840D tool changer: 90 positions magazine type: round magazine RS4 tool holder: SK40 Number of pallets: 4 pieces EQUIPMENT - Loading device at the tool changer - tool breakage control - IKZ system - KM spray gun - Electric handwheel Cwajth2978

Condition: used, Year of construction: 2006, x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:12.000 1/min tool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fach size of pallet:630 x 630mm mm spindle:52 kW / 430Nm total power requirement:87 kVA weight of the machine ca.:15 t dimensions for transport:4,6 x 2,95 x 2,7 m horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, Bfjbb8Bastc glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 10,647 h, Functionality: fully functional, Machine/vehicle number: 15485573034, Travel distance X-axis: 800 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 550 mm, Controller manufacturer: Siemens, Controller model: 840D sl, Indexing of C-axis: 360 °, Maho DMU 80 eVo cover with comprehensive equipment and turning/milling table (motor replaced in 2020) with imbalance detection Optional accessory package can also be purchased after the end of the auction TECHNICAL DETAILS X / Y / Z travel: 800 / 650 / 550 mm C-axis: 360° 3D control: Siemens 840D sl Spindle power 40/100% ED: 35 / 25 kW Torque 40/100% ED: 130 / 87 Nm NC turning/milling table: Ø 830 mm Turning operation: max. 900 rpm Loading weight: max. 600 kg Torque motor: was replaced by the manufacturer in 2020 Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine: 60 (chain magazine with double gripper) Scraper belt chip conveyor with coolant system: 600 liters, paper belt filter MACHINE DETAILS Switch-on time: 32,896 h Spindle hours: 10,647 h IKZ: 40 bar / 23 l/min through spindle center (AD) (mechanically adjustable up to 80 bar) External coolant supply: 4 bar / 40 l/min (mechanically adjustable up to 80 bar) Weight: 12,050 kg Connected load: 45 kVA EQUIPMENT - Infrared measuring probe HeidenheinTS649 - Unbalance detection (vibration sensor on the milling rotary table with unbalance monitoring, safe shutdown and manual workpiece balancing) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - RENISHAW TRS2 for tool breakage monitoring - Flushing gun with 2 bar / 40 l/min pump - Cooling device blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 Dpojqp - Preparation for milling turning option consists of Modified cab parts Reinforced laminated safety glass panes Electric package for torque motor Active cooling unit for milling turntable Technology extension for Siemens 840S sl Technology cycle for machining internal and external Ø with orienting spindle Turning cycles: grooving, undercutting, chip breaking cycle, thread undercutting, thread cutting Integrated balancing system consisting of balance monitoring computer - documentation - Spindle clamping in turning mode - OPTIONAL: extensive additional accessories, e.g. 180 tool holders HSK-A 63, Lang zero-point clamping system - OPTIONAL: extensive range of spindle tools (including Wohlhaupter), Coromant Capto system for turning operations, tool cabinets, tool trolleys, etc.

Condition: repair required (used), Year of construction: 1999, Vertical Machining Center Deckel Maho Dmc 103V with: - X axis travel mm. 1000 - Y axis travel mm. 600 - Z axis travel mm. 600 - CNC Siemens 810 - 24-position tool magazine - electronic remotable handwheel - standard accessories Bc99Wsvtbb7 The machine has a broken Z-axis drive. Just this.