Drill

Bosch PSB 650 RE

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Godpevmz N Usfx Afiokd Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: new, power: 1.2 kW (1.63 HP), color: blue, overall weight: 294 kg, maximum load weight: 500 kg, load capacity: 500 kg, Zallys Jack 1200W 1/22 electric tractor is the ideal solution to avoid manual handling of loads and speed up the movement. - for loads up to 500 kg - for towing up to 1500 kg - versatile and compact - with pneumatic wheels for indoor and outdoor use - optional button for 2-speed adjustment - wide range of standard accessories or customizable on request Max. Forward driving speed (standard version) 10 km/h Max. Driving speed forward (with upgrade)12 km/h Max. driving speed Max. driving speed reverse (standard version) 8 km/h Max. driving speed Max. driving speed reverse (with upgrade) 10 km/h Load capacity in level 500 kg Max. Pulling capacity in level (standard version) 500 kg Max. Max. traction capacity in level (with upgrade) 1.500 kg Max. gradient with load *15 Max. tractive force on hook (standard version) 500 N Max. tractive force on hook (with upgrade) 1500 N Braking distance at deceleration (without load) 6 m * Load capacity depends on slope, type of ground and operating time If the force on the hook in N remains the same, the following circumstances can change the tractive force of the machine (specified in kg): the nature of the ground, the use of ballast, and the type of wheels with which the machine and truck are equipped. Batteries 2 Gjdpfx Afok Dzzkjijkd Battery type - AGM traction battery 12 V Nominal capacity 5 h - 105 Ah nominal capacity 20 h - 130 Ah Battery weight 33 kg Gearbox mechanical Gearbox 1:25 rear drive electronic service brake electro-mechanical parking brake weight without battery 143 kg empty weight incl. 105/130A AGM batteries 209 kg empty weight incl. 200/240A AGM batteries 267 kg Length 2.000 mm Width 814 mm height handlebar / drawbar 1175 mm seat height / saddle height 860 mm loading area height 510 mm wheelbase 1418 mm turning circle 3200 mm

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Gkjdpfx Afjwka Ipeisd Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: ready for operation (used), power: 17 kW (23.11 HP), Year of construction: 2015, operating hours: 1,544 h, Vehicle description 2 pcs diesel all-wheel dumpers AUSA D100 AHA Both from year 2015 Machine 1: according to the hour meter 1,544 hours Machine 2: according to the hour meter 1,292 hours Gsdpoxgp Eysfx Afijkd Only 1,300 kg own weight 1,000 kg payload - High-tip - Joystick control - 16.8 kW Kubota engine - Hydrostatic drive - Immediately ready for use - Uncleaned original condition Sale price: €8,800 net per unit! Low-cost delivery available!

Condition: new, functionality: fully functional, mileage: 1 km, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 2,800 kg, empty load weight: 2,800 kg, operation weight: 2,800 kg, maximum load weight: 1,400 kg, lifting power: 700 kg/m, lifting height: 2,050 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: cabin, GG700K Technical Specifications Engine Model: Kubota V2403 Net Power: 50 hp / 2500 rpm Engine Type: Inline 4-cylinder, water-cooled, 4-stroke diesel engine Rated Operating Capacity: 700 kg Rated Load Limit: 1,400 kg Operating Weight: 2,800 kg Bucket Capacity: 0.4–0.5 m³ Maximum Travel Speed: 12 km/h Hydraulic Pump Flow: 75 L/min Fuel Tank Capacity: 70 liters Dump Angle: 30° Gkedpfoxuwvcex Afiod Dump Height: 2,380 mm Rollback Angle to Ground: 26° Lowering Angle: 20° Length: 3,350 mm Width: 1,720 mm Height: 2,050 mm Height at Maximum Reach: 3,980 mm Height to Bucket Hinge Pin: 3,080 mm Width with Bucket: 1,730 mm Track Width: 1,450 mm Wheelbase: 991 mm Ground Clearance: 180 mm Compact Loader GG700K Skid Steer Loader The GG700K is an advanced skid steer loader delivering high power, reliability, and exceptional performance in demanding work environments. Equipped with modern technology, it is perfectly suited for construction, agriculture, and tasks requiring both mobility and strength. Engine and Drive Powered by a Kubota V2403, a water-cooled, inline four-cylinder diesel engine delivering 50 hp at 2,500 rpm. This engine ensures fuel efficiency, durability, and reliable operation under heavy-duty conditions. Hydraulic System and Performance The hydraulic system provides a pump output of 75 l/min and supports a bucket capacity of 0.4 to 0.5 m³. It features a 30° dump angle, a dump height up to 2,380 mm, a 26° rollback angle to the ground, and a 20° lowering angle, ensuring stability and efficiency on rough terrain. Weight and Load Capacity With an operating weight of 2,800 kg, the GG700K can handle rated loads of 700 kg and up to 1,400 kg maximum load limit. This makes the GG700K ideal for medium-duty lifting and material transport. Speed and Maneuverability The machine reaches a maximum travel speed of 12 km/h, combining compact dimensions with excellent maneuverability for efficient operation in confined spaces and challenging conditions.