ZSW Rottschäfer GmbH

ZSW Rottschäfer GmbH from Leopoldshöhe:

Rottschäfer GmbH, gegründet 1972, handelt mit Werkzeug/Werkzeugmaschinen.

Ms Julia Werning
Werkstrasse 20
33818 Leopoldshöhe
Germany
Nordrhein-Westfalen

More classifieds & machinery offers
Lathe SZIM E3N 750

Type: E3N-750 Year of manufacture: 1977 Max. Turning diameter above the bed 290 mm Max. Max. turning diameter over the cross slide 170 mm Distance between centers 750 mm Speed 56 -... ...


CMT 225x1000 Parallel Lathe CMT URSUS 225x1000x52

CMT parallel lathe model URSUS 225x1000x52 with HP7.5 spindle motor Znqw0n79... ...


Center Lathe SCHAUBLIN 135

centre height 135 mm centre distance 630 mm turning diameter over bed 315 mm Turning diameter via cross slide 150 mm Cross-sled travel path 180 mm bed sled driveway 630 mm spindle ... ...


Center Lathe HEMBRUG DR 1

turning diameter over bed:350 mm Dls9nz turning diameter over slide rest:240 mm turning length:800 mm Spindle RPM:40 - 2000 in 8 Stufen 1/min total power requirement:3 kW Spindle b... ...


L&Z Lathe WEILER Praktikant

Max. Turning diameter over bed: approx. Ø 280 mm Max. Max. turning diameter over support: approx. Ø 150 mm Max. turning length: approx. 500 mm Bar passage: approx. Ø 36 mm spindle:... ...


Wagner DLC 150 A Wagner DLC 150A

Only short term for super price Benjem7xyvc From training workshop little used... ...


Precision lathe WEILER Praktikant 500R

WEILER precision lathe for chuck and shaft machining Model PRAKTIKANT 500 R turning diameter over bed: 297 mm center height: 145 mm center width: 500 mm Swing diameter over cross... ...


L + Z Precision Tool Turning Machine WEILER Commodor

TECHNICAL DATA Turning diameter: -over bed 500 mm -over bed slide 260 mm turning length 1000 mm bar passage 56 mm drive power 4 kW spindle nose A 2 -6 speed range 45 - 2000 1/min f... ...


L+Z Drehmaschine WEILER Praktikant 500 R

L+Z lathe Weiler intern 500 R Stock number: 04-03-212 Machine data: Year of construction: approx. 1980 L x W x H: approx. 1400 x 800 x 1500 mm Weight: approx. 550 kg Machine i... ...


Dissolution of the locksmith shop Tos Blohm Avia Elb

I sell whole locksmith shop with tools and everything there is in the photos. Very important - the machines are in good technical condition - ready to work immediately. Tool grindi... ...


Draw and lead screw lathe Ferdinand C. Weipert Heilbronn E4

Offer a fully functional train and lead screw lathe of the Ferdinand C. Weipert Werkzeugmaschinenfabrik und Eisengießerei Heilbronn. Technical details: - Mains connection three-p... ...


Guidance and lathe GDW LZ 280S

Little used training machine TECHNICAL DETAILS center height: 165 mm center width: 650 mm turning diameter over bed: 280 mm cross slide: 180 mm spindle speed: 30 - 4500 rpm (infi... ...

Auction ended

lathe Weisser Heilbronn Junior

Center width: 1200 mm Peak height above bed: 200 mm No other accessories Bdjyvaciekg Weight: approx. 1300 kg... ...


lathe Voest Alpine 1500 mm

Center width: 1500 mm Peak height above bed: 250 mm Right and left rotation Feeds run clean B93xlz2sd Weight: about 1500 kg... ...


Lathe STANKOIMPORT 1I611P

Lathe Stankoimport 1I611P More info to follow. Dlfftl... ...


Center Lathe OKUMA L S

centre height 270 mm turning diameter 520 mm centre distance 800 mm center height over slide 175 mm turning dia. over slide 350 mm Bddx90u8ofq In our opinion, the machine is in ... ...


Lathe w/ cabinet with contents Cazeneuve

Bed size of lathe: 90 cm; Swing: R 200 cm Contents may vary (See photos) Isrsuki... ...


Lathe Weiler Primus

Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Gonvcxqt2x... ...


Lathe Löw W 490

Löw company lathe ,2473 hours of operation ,3.5 tons weight,length 3 M tip width 1500 mm.The machine is without defects and works perfectly.Delivery is not possible. Pa30arfdu... ...


L+Z lathe VOEST u

L+Z lathe, with bridge and 3-jaw chuck Forkardt F 250 and quick-change toolholder. Speeds from 14-1000 rpm. spindle bore 48 mm Dfq7yntxf center height approx. 200 mm center width a... ...


Lathe Weiler Matador

Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Izfbv9pl7... ...


Universal lathe Harrison M250

Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. ... ...


High performance universal lathe VDF HEIDENREICH & HARBECK Hamburg 250

Center height 130 mm Turning diameter over bed 260 mm turning diameter over support 140 mm center distance 600 mm spindle bore 30 mm bed width 255 mm spindle support DIN 55027 size... ...


MAZAK Multiplex 610 + Gantry Loader Mazak Multiplex 610

The machine is in good condition. Spindles and axes run quietly. Vz8gptyg Two spindles Two heads with 12 tools each Detail capture Axis C, and driven tools each heads Gantry loade... ...


L+Z Drehmaschine WEILER Matador VS2 *Teilüberholt*

L+Z lathe Weiler Matador VS2 *partially overhauled* Stock number: 04-03-224 Machine data: Year of manufacture: approx. 1987 L x W x H: approx. 1500 x 1000 x 1700 mm Weight: abou... ...