Handl Maschinen

Year of construction: 2022, operating hours: 800 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 14121, Gamma Axial sells Profteq welding line from Fom Industrie consisting of: SA 44V vertical 4-head welding machine, with welding seam limitation to 0.2mm Kslhcdwjv Rnqgozjww Transport table and turning of the welded frame for deburring TGV FRT 5 deburring center Pre-welding gasket milling machine GM-202 from Artikon The machines were purchased by us at the end of 2022. In January 2023 they were put into operation and since May 2023 they have not been used because welding machines without deburring were also purchased from Graf Synergy Sale price 120,000 EURO + VAT The machines are also sold separately: SA 44V 4-head welding machine - 60,000 EURO + VAT Transport table and turning of the welded frame for deburring TGV + Deburring center deburring FRT 5 - 65000 EURO + VAT Pre-weld gasket milling machine GM-202 - 4500 EURO + VAT

Year of construction: 2007, Condition: used, “ROTOX” 4-point welding machine type SMK 504 Kwolhcov Nzbcodwzow Investment in 2018 as equipped with: • 4 pieces Welding units equipped with welding bead limitation up to 0.2 mm. • Welding units adapted for welding the HVL connection. • This makes the table side the outside profile. • Max. welding dimensions approx. 3300 x 4000 mm. • Min. welding dimensions approx. 400 x 400 mm. • Depending on profile width and technically required adjustments. • Max. profile height approx. 125 mm. • Max. profile width approx. 140 mm. • Electronic control and automatic positioning of the • welding units at the correct length and width dimensions. • Automatic outfeed transport. • Automatic outfeed transport track to the “ROTOX” Angle processing machine. “ROTOX” CNC Corner processing machine type EPA 479 Machine for fully automatic processing of welded corners. Investment in 2018 as equipped with: • Up to max. 8 tools can be mounted on the slide at the top as well as • on the slide at the bottom. • Pneumatic clamping device. • Coupling with 4-point welding machine. • Automatic transport and turning station. • Outside corner processing by means of CNC-controlled milling blade. • Very user-friendly control. • Max. size automatic turning is approx. 2500 x 2500 mm. and is • dependent on weight, profile and protective film.

Year of construction: 2000, operating hours: 2,000 h, Condition: used, Functionality: fully functional, Hello, For sale is a Herrmann ultrasonic welding machine HS DIALOG active control with 4.5 kW (400V) including control unit and workbench. Kwslhcdev H Ucuowzsw It was used for series production in the automotive sector, but there was a short circuit due to leaked coffee. The generator was therefore repaired in December 2024 and the welding machine is fully functional again. Everything that can be seen in the pictures is included in the scope of delivery (no sonotrode!). Guarantee: 6 months on the generator. Otherwise, any warranty is excluded. Inspection and functional test by arrangement on site. Total weight approx. 250 kg, forklift required.

Condition: good (used), Vibration welding machine for plastic Stock number: 2974 Manufacturer: Branson Type: VIP 2830 Device number: 4.E035.00.A10 Table: 1,000 x 420 mm Stamp: 800 x 420 mm Distance table - stamp: 600 mm Weight: approx. 2 t Dimensions: 2,400 x 1,700 x 2,400 mm Equipment: Condition: ready for use Kolhcjv D Nfrsdwzsww Sold without tools!

Condition: ready for operation (used), A Weldan high-frequency plastic welding machine is available. Welding dimensions X/Y: 520mm/520mm, power: 19kW, frequency: 27.12MHz. On-site inspection is possible. Kjlevz Dfnshcdwzsww

Year of construction: 2013, Condition: excellent (used), Ultrasonic welding system Kwelevxppashcdwzow Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Year of construction: 2015, Condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available Kwelhcdsvvw Ekswzew - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Condition: ready for operation (used), Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg. Kwolhjvvu N Hecdwzjw

Year of construction: 2010, Condition: good (used), Functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm Kslhcjvt Sc Esdwzoww

Condition: good (used), Year of construction: 2000, Lechmann*MÜH plastic sleeve welding machine, make GEORG FISCHER Kslhcdjvk D D Newzjww GF+ESA+24 S, year of manufacture approx. 2000.

Year of construction: 2018, Condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Kjlhcdsviv Azewzjww

Year of construction: 2014, Condition: good (used), Type / Model: K 3215/155 Machine number: 493441 Control system: Clamping surface lifting unit: 1,200 x 500 mm Clamping surface vibration unit: 1,000 x 500 mm Working area (max. part size): 1,000 x 500 mm Opening width: 595 mm Stroke of the table: 500 mm Welding force: 25,000 N at 100 bar max. 37,000 N Amplitude lower/upper limit: 0.5 to 1.5 mm Tolerance infinitely variable: max. 0.4 mm Cycle time: approx. 20 to 30 seconds per welding cycle Power requirement: 20 kW Pneumatic input pressure: 4.5 to 10 bar (ideally 6 bar) Machine dimensions: 2,500 x 1,900 x 2,420 mm Control cabinet: 400 x 1,200 x 2,000 mm Kolsu I Uayehcdwzjww Machine weight: approx. 3.2 t Switch cabinet weight: approx. 0.6 t

Year of construction: 2017, Condition: excellent (used), Functionality: fully functional, Ultrasonic plastic welding machine Lingke L3000 15KHz 2800W. Very good condition. Machine was used on very small production line for welding plastic cartridges. Machine was purchased in 2017 as new from manufacturer. Amount of welding cycles since then is below 10000. Installed welding horn allows to weld 32x24mm surface. Kwolhcdwju Ilg Rezew

Year of construction: 2006, Condition: ready for operation (used), machine/vehicle number: KWB2020, KSONIC K-SONIC ultrasonic welding machine in very good condition Reference : KWB2020 Kwjlhou H Ramocdwzjw Year : 2006 Output : 2000 W frequency : 20 KHZ AC220 V 1P 50/60HZ Air source : 6 KG/cm2 Air cylinder : diameter 63 / stroke 75 mm Rigid column diameter: 80 mm Dimensions: 670 x 370 x 980-1320 mm (LxWxH) Machine weight: 76 kg

Condition: new, Year of construction: 2023, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: 20231120, Equipment: type plate available, Hexagon twin shuttle type HG-3504S Serial number 20231120. Kwjlhcdwju E Rk Ajzjw The machine has a 35Kw generator and twin shuttles. Double table HF welding machine complete with TÜV approval and CE Comparable machines are at least twice the price!

Year of construction: 2014, Condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Kslhcdwouy T Nqszjww

Year of construction: 2009, Condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Kwoljuy T I Hehcdwzjw

Year of construction: 2010, Condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Kwelhcdwsuy T Ndezow

Condition: used, Functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Kolhcsuyu N Ejdwzjww Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Good working condition. Please check out our other listings as well.

Year of construction: 2013, Condition: ready for operation (used), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Kjlhjugmxvocdwzeww

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Kwolhcdet H Nhuswzow Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: good (used), Year of construction: 2014, Welding line (two-head welder) cleaner with part rotation system Kelhcdwotrwltjzeww

Condition: used, Year of construction: 2000, Functionality: fully functional, Lemo winder, used in very good condition, everything in working order Kwolhcdwjtqddzjzow

Year of construction: 2018, Condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Kolhcdstp Nacjwzjww

Condition: like new (used), Year of construction: 2022, operating hours: 300 h, 3x VE20 Microbond SCI 3x New Kwslhcder Rdd Newzsw The MICROBOND CSI system, consisting of a feed unit, control unit and high-performance generator, guarantees consistent welding quality. A solid and at the same time high-precision mechanism enables gap stabilization through the patented MicrogapControl gap control. The MICROBOND control system controls and visualizes this continuous joining process. A constant amplitude output and high continuous sonic performance realize process speeds of up to 800 m/min.